korsygfhrtzangaiide

------------------------------------------------------------------------------ Version 8.24.0 [v8-stable] 2017-01-10 - rsyslog now builds on AIX see also: https://github.com/rsyslog/rsyslog/pull/1247 Thanks to github user purnimam1 and the team at IBM Note: the rsyslog project has no AIX platform to ensure that future versions will remain buildable on AIX. If you would like to contribute ressources, please contact the rsyslog team. - mmdblookup: new maxminddb lookup message modify plugin Thanks to 饶琛琳 (github user chenryn) for the contribution - mmrm1stspace: new module; removes first space in MSG if present - KSI signature provider: file permissions can now be specified This happens via parameters equal to those used by omfile itself. Note that KSI files can have different permissions/owner than the log files themself. Thanks to Allan Park for the patch. - omzmq: new features Thanks to Brian Knox for the patch. - change: when the hostname is empty, we now use "localhost-empty-hostname" In 8.23.0, "localhost" was used in this case, but that could be misleading. The new name makes the error condition (gethostname() should always return a non-empty name) more obvious. - omelasticsearch: remove "asyncrepl" config parameter The _bulk index endpoint on ElasticSearch 5.0 no longer ignores the ?replication=async query parameter. It was deprecated since 1.5 and silently ignored in 2.x but passing it to a 5.x instance breaks omeleastisearch with a 400 response. closes https://github.com/rsyslog/rsyslog/issues/1250 - omfwd: Add support for bind-to-device (see below on same for imudp) - imudp: Add support for bind-to-device Add support for bind-to-device option to omfwd and imudp modules. Configured using device="name". Only new syntax format is supported. e.g., input(type="imudp" port=["10514"] device="eth0" name="udp") Action(type="omfwd" Target="192.168.1.23" Port="10514" Device="eth0") see also https://github.com/rsyslog/rsyslog/pull/1261 Thanks to David Ahern for the patch. - imudp: limit rcvbufsize parameter to max 1GiB - rainerscript: implement new "call_indirect" statement - bugfix imjournal: make state file handling more robust There is a bug in rsyslog which is caused by not very atomic writes of imjournal statefile. It's hardly reproducible but there is a way. fscanf error appears only when rsyslog reads an empty statefile which causes that imjournal is stopped so no logging from journal is performed. When the statefile contains random bytes error appears again but from journal and imjournal is stopped too. In this patch Rsyslog writes imjournal statefile more atomically and secure. Reading the statefile is more robust and doesn't affect imjournal module so when corrupted statefile is read imjournal ignores statefile, continues with logging and it doesn't stop. Logger can be used as a test if it's logging or not. Patch introduces a new option with both old and new config format "IgnoreNonValidStateFile" which is "on" by default and it can turn off ignorance of non valid statefile. Thanks to github user tomassykora for the patch. - bugfix core: lookup table reload was not properly integrated The opcode was not handled, what lead to misleading messages in debug log. Since we run debug builds more strictly, it also causes an assertion to trigger, thus aborting the test - bugfix core: potential dealock on shutdown could happen when rsyslog was started and quickly shut down OR when co-incidently a new thread was spawend "with bad timing" around the time of shutdown. See also https://github.com/rsyslog/rsyslog/pull/1274 Thanks to github user tomassykora for the final patch and Rado Sroka for the analysis and an initial patch. - bugfix ommongodb: did not work in v8 due to invalid indirection Thanks to Benoit Dolez for the patch. - bugfix ommongodb: fix tryResume handling To make tryResume working, the connection to mongodb need to be closed. Thus close it on "insert error". Thanks to Benoit Dolez for the patch. - bugfix omfwd: retry processing was not done correctly, could stall see also https://github.com/rsyslog/rsyslog/pull/1261 Thanks to David Ahern for the patch. - bugfix imuxsock: segfault non shutdown when $OmitLocalLogging is on Imuxsock tries to close socket on index 0 which ends with segfault. Thanks to Tomas Sykora for the patch. - testbench: * empty-hostname test did not work correctly * improve debugging by better output ------------------------------------------------------------------------------ Version 8.23.0 [v8-stable] 2016-11-15 - NEW BUILD REQUIREMENT: libfastjson 0.99.3 This was introduced in 8.20.0 as a suggestion and has now become a hard requirement. See 8.20.0 ChangeLog entry for more details. - KSI signatures: removed SHA2-224 hash algorithm This is considered insecure and no longer supported by the underlying KSI library. If still used within a configuration, a descriptive error message is emitted during config processing. Thanks to Henri Lakk for the initial patch. - imfile: new timeout feature for multi-line reads When using startmsg.regex, messages are held until the next one is written. We now provide a "readTimeout" parameter family (see doc) to timeout such reads and ensure messages are not held for a very long time. see also https://github.com/rsyslog/rsyslog/issues/1133 - omfile: improve robustness against network file system failures in case of failure, a close and re-open is tried, which often solves the issue (and wasn't handle before this patch). see also https://github.com/rsyslog/rsyslog/pull/1161 Thanks to github user hese10 for the patch. - pmaixforwardedfrom: support for AIX syslogd -s option if syslog in AIX started with "-s" option, AIX syslog adds only "From " instead of "Message forwarded from ". With this patch, both are now detected. Thanks to github user patelritesh for the patch. - omelasticsearch: add ability to specify max http request size This permits to keep batches below ES-configured limits. Thanks to github user barakshechter for the patch. - omelasticsearch: high availability addressing of ElasticSearch cluster allow to specify an array of servers, which is tried until a working one is found (and given up only if none works). Thanks to github user barakshechter for the patch. - omelasticsearch: make compatible with ElasticSearch 2.x and 5.x fixes omelasticsearch logs response from ElasticSearch 5.0 _bulk endpoint as error See also https://github.com/rsyslog/rsyslog/pull/1253 Thanks to Christian Rodemeyer for the patch. - omhiredis: add dynakey attribute. If set to on, this causes omhiredis to treat the key attribute as the name of a template so that you can build a dynamic redis queue name or list key. see also: https://github.com/rsyslog/rsyslog/pull/1218 Thanks to github user bobthemighty for the patch - omtcl: new contributed module see also https://github.com/rsyslog/rsyslog/pull/1041 Please note: contributed modules are not directly supported by the project. You might want to contact the author for questions. Thanks to Francisco Castro for contributing it. - RainerScript: provide a capability to set environment variables via 'global(environment="var=val")' config statement. This is most importantly for things like HTTP_PROXY. see also https://github.com/rsyslog/rsyslog/issues/1209 - lookup tables: improved error checking Thanks to Janmejay Singh for the patch. - queue subsystem: add configuration parameter "queue.samplinginterval" Supports sampling of messages (as often used in data transmission). Thanks to Zachary M. Zhao for the patch. - bugfix core: errmsg.LogError now switches to dfltErrLogger just before shutdown Thanks to Janmejay Singh for the patches. - bugfix core: fixed un-freed memory in non-transactional action using string-passing closes https://github.com/rsyslog/rsyslog/issues/968 Thanks to Janmejay Singh for the patches. - rsgtutil: option to specify KSI publications file certificate constraints see also https://github.com/rsyslog/rsyslog/issues/1207 - omprog: bugfixes and enhancements - omprog resource leak fix (fd leak) - omprog got ability to force-kill process if it doesn't die in 5 seconds (linux specific) - child-process lifecycle debugging aid (in form of logs) (mainLoop and omprog cleanup both log pid at child-death, mainLoop reaping is now visible to user, as opposed to being a mystery, because omprog didn't seem to anticipate it in terms of code) Thanks to Janmejay Singh for the patches. see also https://github.com/rsyslog/rsyslog/pull/1155 - bugfix imfile: ReopenOnTruncate processing, file open processing This fixes * ReopenOnTrucate was only honored when a state file existed see https://github.com/rsyslog/rsyslog/issues/1090 * open processing could run into a loop see https://github.com/rsyslog/rsyslog/issues/1174 This is done via refactoring the open file handling, which provides overall cleaner and easier-to-follow code. Thanks to Owen Smith for analyzing the problem and providing a prototype PR which greatly helped towards the final solution. - bugfix omlibdbi: libdbi-driver-sqlite3/2 requires to provide a path to database split into two strings: * absolute path, where the database file sits * database filename itself. This was previously not done. Thanks to github user aleek for the patch. - bugfix RainerScript: issue in prifilt() function Initialize func-data(and to-be-freed flag) correctly for prifilt function-node Thanks to Janmejay Singh for the patch. - bugfix omrelp: invalid module name imrelp was used in some error messages Thanks to Chris Pilkington for the patch. - bugfix core: abort when persisting object state This causes a segfault. It happens whenever an object state larger than 4095 byte is persisted. Then, incorrectly a try to rollover to a new state file is tried, which will lead to a division by zero as the necessary variables for this operation are not set because we are NOT in circular mode. This problem can happen wherever state files are written. It has been experienced with imfile and queue files. Many thanks to github user mostolog for his help in reproducing the issue, which was very important to finally nail down this long-standing bug. closes https://github.com/rsyslog/rsyslog/issues/1239 closes https://github.com/rsyslog/rsyslog/issues/1162 closes https://github.com/rsyslog/rsyslog/issues/1074 - bugfix: segfault if hostname is unset on system happens when gethostname() returns empty string. This will cause the createon of the localhostname prop_t to fail, which in turn leads to a NULL pointer dereference when emitting local messages. As we emit a startup message by default, this had usually lead to a segfault on startup. Thanks to Erik Potter and github user mostolog for their help in analyzing this problem. closes https://github.com/rsyslog/rsyslog/issues/1040 closes https://github.com/rsyslog/rsyslog/issues/335 - bugfix external module perl skeleton: did not work properly Thanks to github user Igorjan666 for the patch. - bugfix build system: Fix detection of pthread_setschedparam() on platforms such as FreeBSD see also https://github.com/rsyslog/rsyslog/pull/1147 Thanks to Matthew Seaman for the patch. - bugfix omelasticsearch: modifies constant memory under some circumstances Function computeBaseUrl may modify its serverParam parameter, but this may contain the constant string "localhost". Depending on the platform, this can lead to a segfault. Noticed while working on compiler warnings, not seen in practice. - "bugfix": theoretical queue file corruption when more than MAX_INT files closes https://github.com/rsyslog/rsyslog/issues/1202 - bug fix/KSI: LOGSIG11 missing in the beginning of KSI log signature file When logging with KSI is not working properly for whatever reason, an empty .ksisig file is created (which by itself is not an issue). However, later it looks like this file is re-used, but it is not checked whether it already contains the magic LOGSIG11 in the beginning of the file. This leads to a log signature file which has correct content but is missing the LOGSIG11 magic in the beginning. - bugfix template processor: missing escaping of backslash in json mode Thanks to github user mostolog for providing the patch. - build environment: --enable-debug now defaults to new "auto" mode previously, DEBUG mode (and thus assert() macros) was disabled by default and explicitly needed to be enabled by providing the --enable-debug ./configure switch. Now, a new --enable-debug=auto mode has been added and made the default. It enables DEBUG mode if we build from git and only disables it when a release build is done (from the release tarball). This aims at better error checking during testbench runs and developer testing. - testbench improvements * improved testbench file generation tool Thanks to Pascal Withopf for the patch. * added some plumbing for extended tests which work by overriding OS APIs * imfile ReopenOnTruncate option is now being tested * the CI environment now runs most tests in debug mode, but some in release mode to cover potential release-mode races * template json option is now being tested * object state persisting received a basic test * added test for empty hostnames * added tests for omprog ------------------------------------------------------------------------------ Version 8.22.0 [v8-stable] 2016-10-04 - ompgsql: add template support Thanks to Radu Gheorghe for implementing this. - generate somewhat better error message on config file syntax error a common case (object at invalid location) has received it's own error message; for the rest we still rely on the generic flex/bison handler - bugfix:omhiredis reconnects after failure previously it could loose messages under such conditions. Thanks to Bob Gregory for the patch. - general cleanup and code improvement mostly guided by compiler warnings induced by newer opensuse builbot environment ------------------------------------------------------------------------------ Version 8.21.0 [v8-stable] 2016-08-23 - CHANGE OF BEHAVIOUR: by default, internal messages are no longer logged via the internal bridge to rsyslog but via the syslog() API call [either directly or via liblogging). For the typical single-rsyslogd-instance installation this is mostly unnoticable (except for some additional latency). If multiple instances are run, only the "main" (the one processing system log messages) will see all messages. To return to the old behaviour, do either of those two: 1) add in rsyslog.conf: global(processInternalMessages="on") 2) export the environment variable RSYSLOG_DFLT_LOG_INTERNAL=1 This will set a new default - the value can still be overwritten via rsyslog.conf (method 1). Note that the environment variable must be set in your **startup script**. For more information, please visit http://www.rsyslog.com/rsyslog-error-reporting-improved/ - slightly improved TLS syslog error messages - queue subsystem: improved robustness The .qi file is now persisted whenever an existing queue file is fully written and a new file is begun. This helps with rsyslog aborts, including the common case where the OS issues kill -9 because of insufficiently configured termination timout (this is an OS config error, but a frequent one). Also, a situation where an orphaned empty file could be left in the queue work directory has been fixed. We expect that this change causes fewer permanent queue failures. - bugfix: build failed on some platforms due to missing include files ------------------------------------------------------------------------------ Version 8.20.0 [v8-stable] 2016-07-12 - NEW BUILD REQUIREMENT: librelp, was 1.2.5, now is 1.2.12 This is only needed if --enable-relp is used. The new version is needed to support the new timeout parameter in omrelp. - NEW BUILD SUGGESTION: libfastjson 0.99.3 while not strictly necessary, previous versions of libfastjson have a bug in unicode processing that can result in non US-ASCII characters to be improperly encoded and may (very unlikely) also cause a segfault. This version will become mandatory in rsyslog 8.23.0 - omrelp: add configurable connection timeout Thanks to Nathan Brown for implementing this feature. - pmrfc3164: add support for slashes in hostname added parameter "permit.slashesinhostname" to support this, off by default [Note that the RFC5424 always supported this, as 5424 is a different standard] - bugfix omfile: handle chown() failure correctly If the file creation succeeds, but chown() failed, the file was still writen, even if the user requested that this should be treated as a failure case. This is corrected now. Also, some refactoring was done to create better error messages. - omfile now better conveys status of unwritable files back to core - config files recursively including themselfes are now detected and an error message is emitted in that case; Previously, this misconfiguration resulted in rsyslog loop and abort during startup. closes https://github.com/rsyslog/rsyslog/issues/1058 - refactored code to not emit compiler warnings in "strict mode" We changed the compiler warning settings to be rather strict and cleaned up the code to work without generating any warning messages. This results in an overall even more improved code quality, which will now also be enforced via our CI systems. - bugfix: fix some issues with action CommitTransaction() handling An action that returns an error from CommitTransaction() caused a loop in rsyslog action processing. Similarly, retry processing was not properly handled in regard to CommitTransaction(). This is a first shot at fixing the situation. It solves the immediate problems, but does not implement the full desired functionality (like error file). see also https://github.com/rsyslog/rsyslog/issues/974 see also https://github.com/rsyslog/rsyslog/issues/500 - bugfix omqmqp1: connecting to the message bus fails on nonstandard port Thanks to Ken Giusti for the patch. see also: https://github.com/rsyslog/rsyslog/pull/1064 - testbench/CI enhancements * new tests for RELP components * new tests for core action processing and retry * travis tests now also run against all unstable versions of supporting libraries. This helps to track interdependency problems early. * new tests for hostname parsing * new tests for RainerScript comparisons ------------------------------------------------------------------------------ Version 8.19.0 [v8-stable] 2016-05-31 - NEW BUILD REQUIREMENT: autoconf-archive - omelasticsearch: add option to permit unsigned certs (experimentally) This adds plumbing as suggested by Joerg Heinemann and Radu Gheorghe, but is otherwise untested. Chances are good it works. If you use it, please let us know your experience and most importantly any bug reports you may have. closes https://github.com/rsyslog/rsyslog/issues/89 - imrelp: better error codes on unvailablity of TLS options Most importantly, we will tell the user in clear words if specific TLS options are not available due to too-old GnuTLS. closes https://github.com/rsyslog/rsyslog/issues/1019 - default stack size for inputs has been explicitely set to 4MiB for most platforms, this means a reduction from the default of 10MiB, hower it may mean an increas for micro-libc's (some may have as low as 80KiB by default). - testbench: We are now using libfaketime instead of faketime command line tool. Make sure you have installed the library and not just the binary! - refactor stringbuf * use only a single string buffer ... both for the internal representation as well as the C-String one. The module originally tried to support embedded NUL characters, which over time has prooven to be not necessary. Rsyslog always encodes NUL into escape sequences. Also, the dual buffers were used inconsistently, which could lead to subtle bugs. With the single buffer, this does no longer happen and we also get some improved performance (should be noticable) and reduced memory use (a bit). closes https://github.com/rsyslog/rsyslog/issues/1033 * removed no longer used code * internal API changes to reflect new needs * performance improvements * miscellaneous minor cleanup - fix: potential misadressing in template config processing This could cause segfault on startup. Happens when template name shorter than two chars and outname is not set. Once we are over startup, things work reliably. - bugfix omfile: async output file writing does not respect flushing neither parameter flushInterval nor flushOnTXEnd="on" was respected. closes https://github.com/rsyslog/rsyslog/issues/1054 - bugfix imfile: corrupted multi-line message when state data was persisted see also https://github.com/rsyslog/rsyslog/issues/874 Thanks to Magnus Hyllander for the analysis and a patch suggestion. - bugfix imfile: missing newline after first line of multiline message see also https://github.com/rsyslog/rsyslog/issues/843 Thanks to Magnus Hyllander for the patch. - bugfix: dynstats unusedMetricTtl bug Thanks to Janmejay Singh for fixing this. - bugfix build system: build was broken on SunOS Thanks to Filip Hajny for the patch. - bugfix: afterRun entry point not correctly called The entry point was called at the wrong spot, only when the thread had not already terminated by itself. This could cause various cleanup to not be done. This affected e.g. imjournal. closes https://github.com/rsyslog/rsyslog/issues/882 - bugfix dynstats: do not leak file handles Thanks to Janmejay Singh for the patch. - bugfix omelasticsearch: disable libCURL signal handling previously, this could lead to segfaults on connection timeout see also https://github.com/rsyslog/rsyslog/pull/1007 Thanks to Sai Ke WANG for the patch. - bugfix omelasticsearc: some regressions were fixed * error file was no longer written * fix for some potential misaddressings - improved wording: gnutls error message points to potential cause What GnutTLS returns us is very unspecific and somehwat misleading, so we point to what it most probably is (broken connect). see also https://github.com/rsyslog/rsyslog/issues/846 - some general code improvements * "fixed" cosmetic memory leaks at shutdown - build system bugfix: configure can't find gss_acquire_cred on Solaris Thanks to github user vlmarek for the patch. - improvements to the CI environment * improvements on the non-raciness of some tests * imdiag: avoid races in detecting queue empty status This reslolves cases where the testbench terminated rsyslog too early, resulting in potential message loss and test failure. * omkafka has now dynamic tests Thanks to Janmejay Singh for implementing them. * try to merge PR to master and run tests; this guards against cross-PR regressions and wasn't caught previously. Note that we skip this test if we cannot successfully merge. So this is not a replacement for a daily full "all-project integration test run". * travis has finally enabled elasticsearch tests ES was unfortunately not being regularly tested for quite a while due to missing environment. This lead to some regressions becoming undetected. These were now discovered thanks to the new support on travis. Also, this guards against future regressions. * imfile has now additional tests and overall better coverage * omfile has now additional tests ------------------------------------------------------------------------------ Version 8.18.0 [v8-stable] 2016-04-19 - testbench: When running privdrop tests testbench tries to drop user to "rsyslog", "syslog" or "daemon" when running as root and you don't explict set RSYSLOG_TESTUSER environment variable. Make sure the unprivileged testuser can write into tests/ dir! - templates: add option to convert timestamps to UTC closes https://github.com/rsyslog/rsyslog/issues/730 - omjournal: fix segfault (regression in 8.17.0) - imptcp: added AF_UNIX support Thanks to Nathan Brown for implementing this feature. - new template options * compressSpace * date-utc - redis: support for authentication Thanks to Manohar Ht for the patch - omkafka: makes kafka-producer on-HUP restart optional As of now, omkafka kills and re-creates kafka-producer on HUP. This is not always desirable. This change introduces an action param (reopenOnHup="on|off") which allows user to control re-cycling of kafka-producer. It defaults to on (for backward compatibility). Off allows user to ignore HUP as far as kafka-producer is concerned. Thanks to Janmejay Singh for implementing this feature - imfile: new "FreshStartTail" input parameter Thanks to Curu Wong for implementing this. - omjournal: fix libfastjson API issues This module accessed private data members of libfastjson - ommongodb: fix json API issues This module accessed private data members of libfastjson - testbench improvements (more tests and more thourough tests) among others: - tests for omjournal added - tests for KSI subsystem - tests for priviledge drop statements - basic test for RELP with TLS - some previously disabled tests have been re-enabled - dynamic stats subsystem: a couple of smaller changes they also involve the format, which is slightly incompatible to previous version. As this was out only very recently (last version), we considered this as acceptable. Thanks to Janmejay Singh for developing this. - foreach loop: now also iterates over objects (not just arrays) Thanks to Janmejay Singh for developing this. - improvements to the CI environment - enhancement: queue subsystem is more robst in regard to some corruptions It is now detected if a .qi file states that the queue contains more records than there are actually inside the queue files. Previously this resulted in an emergency switch to direct mode, now the problem is only reported but processing continues. - enhancement: Allow rsyslog to bind UDP ports even w/out specific interface being up at the moment. Alternatively, rsyslog could be ordered after networking, however, that might have some negative side effects. Also IP_FREEBIND is recommended by systemd documentation. Thanks to Nirmoy Das and Marius Tomaschewski for the patch. - cleanup: removed no longer needed json-c compatibility layer as we now always use libfastjson, we do not need to support old versions of json-c (libfastjson was based on the newest json-c version at the time of the fork, which is the newest in regard to the compatibility layer) - new External plugin for sending metrics to SPM Monitoring SaaS Thanks to Radu Gheorghe for the patch. - bugfix imfile: fix memory corruption bug when appending @cee Thanks to Brian Knox for the patch. - bugfix: memory misallocation if position.from and position.to is used a negative amount of memory is tried to be allocated if position.from is smaller than the buffer size (at least with json variables). This usually leads to a segfault. closes https://github.com/rsyslog/rsyslog/issues/915 - bugfix: fix potential memleak in TCP allowed sender definition depending on circumstances, a very small leak could happen on each HUP. This was caused by an invalid macro definition which did not rule out side effects. - bugfix: $PrivDropToGroupID actually did a name lookup ... instead of using the provided ID - bugfix: small memory leak in imfile Thanks to Tomas Heinrich for the patch. - bugfix: double free in jsonmesg template There has to be actual json data in the message (from mmjsonparse, mmnormalize, imjournal, ...) to trigger the crash. Thanks to Tomas Heinrich for the patch. - bugfix: incorrect formatting of stats when CEE/Json format is used This lead to ill-formed json being generated - bugfix omfwd: new-style keepalive action parameters did not work due to being inconsistently spelled inside the code. Note that legacy parameters $keepalive... always worked see also: https://github.com/rsyslog/rsyslog/issues/916 Thanks to Devin Christensen for alerting us and an analysis of the root cause. - bugfix: memory leaks in logctl utility Detected by clang static analyzer. Note that these leaks CAN happen in practice and may even be pretty large. This was probably never detected because the tool is not often used. - bugfix omrelp: fix segfault if no port action parameter was given closes https://github.com/rsyslog/rsyslog/issues/911 - bugfix imtcp: Messages not terminated by a NL were discarded ... upon connection termination. Thanks to Tomas Heinrich for the patch. ------------------------------------------------------------------------------ Version 8.17.0 [v8-stable] 2016-03-08 - NEW REQUIREMENT: libfastjson see also: http://blog.gerhards.net/2015/12/rsyslog-and-liblognorm-will-switch-to.html - new testbench requirement: faketime command line tool This is used to generate a controlled environment for time-based tests; if not available, tests will gracefully be skipped. - improve json variable performance We use libfastjson's alternative hash function, which has been proven to be much faster than the default one (which stems back to libjson-c). This should bring an overall performance improvement for all operations involving variable processing. closes https://github.com/rsyslog/rsyslog/issues/848 - new experimental feature: lookup table suport Note that at this time, this is an experimental feature which is not yet fully supported by the rsyslog team. It is introduced in order to gain more feedback and to make it available as early as possible because many people consider it useful. Thanks to Janmejay Singh for implementing this feature - new feature: dynamic statistics counters which may be changed during rule processing Thanks to Janmejay Singh for suggesting and implementing this feature - new contributed plugin: omampq1 for AMQP 1.0-compliant brokers Thanks to Ken Giusti for this module - new set of UTC-based $now family of variables ($now-utc, $year-utc, ...) - simplified locking when accessing message and local variables this simlifies the code and slightly increases performance if such variables are heavily accessed. - new global parameter "debug.unloadModules" This permits to disable unloading of modules, e.g. to make valgrind reports more useful (without a need to recompile). - timestamp handling: guard against invalid dates We do not permit dates outside of the year 1970..2100 interval. Note that network-receivers do already guard against this, so the new guard only guards against invalid system time. - imfile: add "trimlineoverbytes" input paramter Thanks to github user JindongChen for the patch. - ommongodb: add support for extended json format for dates Thanks to Florian Bücklers for the patch. - omjournal: add support for templates see also: https://github.com/rsyslog/rsyslog/pull/770 Thanks to github user bobthemighty for the patch - imuxsock: add "ruleset" input parameter - testbench: framework improvement: configs can be included in test file they do no longer need to be in a separate file, which saves a bit of work when working with them. This is supported for simple tests with a single running rsyslog instance Thanks to Janmejay Singh for inspiring me with a similar method in liblognorm testbench. - imptcp: performance improvements Thanks to Janmejay Singh for implementing this improvement - made build compile (almost) without warnings still some warnings are suppressed where this is currently required - improve interface definition in some modules, e.g. mmanon, mmsequence This is more an internal cleanup and should have no actual affect to the end user. - solaris build: MAXHOSTNAMELEN properly detected - build system improvement: ability to detect old hiredis libs This permits to automatically build omhiredis on systems where the hiredis libs do not provide a pkgconfig file. Previsouly, this required manual configuration. Thanks to github user jaymell for the patch. - rsgtutil: dump mode improvements * auto-detect signature file type * ability to dump hash chains for log extraction files - build system: fix build issues with clang clang builds often failed with a missing external symbol "rpl_malloc". This was caused by checks in configure.ac, which checked for specific GNU semantics. As we do not need them (we never ask malloc for zero bytes), we can safely remove the macros. Note that we routinely run clang static analyer in CI and it also detects such calls as invalid. closes https://github.com/rsyslog/rsyslog/issues/834 - bugfix: unixtimestamp date format was incorrectly computed The problem happened in leap year from March til then end of year and healed itself at the begining of the next year. During the problem period, the timestamp was 24 hours too low. fixes https://github.com/rsyslog/rsyslog/issues/830 - bugfix: date-ordinal date format was incorrectly computed same root cause aus for unixtimestamp and same triggering condition. During the affected perido, the ordinal was one too less. - bugfix: some race when shutting down input module threads this had little, if at all, effect on real deployments as it resulted in a small leak right before rsyslog termination. However, it caused trouble with the testbench (and other QA tools). Thanks to Peter Portante for the patch and both Peter and Janmejay Singh for helping to analyze what was going on. - bugfix tcpflood: did not handle connection drops correct in TLS case note that tcpflood is a testbench too. The bug caused some testbench instability, but had no effect on deplyments. - bugfix: abort if global parameter value was wrong If so, the abort happened during startup. Once started, all was stable. - bugfix omkafka: fix potential NULL pointer addressing this happened when the topic cache was full and an entry needed to be evicted - bugfix impstats: @cee cookie was prefixed to wrong fromat (json vs. cee) Thanks to Volker Fröhlich for the fix. - bugfix imfile: fix race during startup that could lead to some duplication If a to-be-monitored file was created after inotify was initialized but before startup was completed, the first chunk of data from this file could be duplicated. This should have happened very rarely in practice, but caused occasional testbench failures. see also: https://github.com/rsyslog/rsyslog/issues/791 - bugfix: potential loss of single message at queue shutdown see also: https://github.com/rsyslog/rsyslog/issues/262 - bugfix: potential deadlock with heavy variable access When making havy use of global, local and message variables, a deadlock could occur. While it is extremly unlikely to happen, we have at least seen one incarnation of this problem in practice. - bugfix ommysql: on some platforms, serverport parameter had no effect This was caused by an invalid code sequence which's outcome depends on compiler settings. - bugfix omelasticsearch: invalid pointer dereference The actual practical impact is not clear. This came up when working on compiler warnings. Thanks to David Lang for the patch. - bugfix omhiredis: serverport config parameter did not reliably work depended on environment/compiler used to build - bugfix rsgtutil: -h command line option did not work Thanks to Henri Lakk for the patch. - bugfix lexer: hex numbers were not properly represented see: https://github.com/rsyslog/rsyslog/pull/771 Thanks to Sam Hanes for the patch. - bugfix TLS syslog: intermittent errors while sending data Regression from commit 1394e0b. A symptom often seen was the message "unexpected GnuTLS error -50 in nsd_gtls.c:530" - bugfix imfile: abort on startup if no slash was present in file name param Thanks to Brian Knox for the patch. - bugfix rsgtutil: fixed abort when using short command line options Thanks to Henri Lakk - bugfix rsgtutil: invalid computation of log record extraction file This caused verification to fail because the hash chain was actually incorrect. Depended on the input data set. closes https://github.com/rsyslog/rsyslog/issues/832 - bugfix build system: KSI components could only be build if in default path ------------------------------------------------------------------------------ Version 8.16.0 [v8-stable] 2016-01-26 - rsgtutil: Added extraction support including loglines and hash chains. More details on how to extract loglines can be found in the rsgtutil manpage. See also: https://github.com/rsyslog/rsyslog/issues/561 - clean up doAction output module interface We started with char * pointers, but used different types of pointers over time. This lead to alignment warnings. In practice, I think this should never cause any problems (at least there have been no reports in the 7 or so years we do this), but it is not clean. The interface is now cleaned up. We do this in a way that does not require modifications to modules that just use string parameters. For those with message parameters, have a look at e.g. mmutf8fix to see how easy the required change is. - new system properties for $NOW properties based on UTC This permits to express current system time in UTC. See also https://github.com/rsyslog/rsyslog/issues/729 - impstats: support broken ElasticSearch JSON implementation ES 2.0 no longer supports valid JSON and disallows dots inside names. This adds a new "json-elasticsearch" format option which replaces those dots by the bang ("!") character. So "discarded.full" becomes "discarded!full". This is a workaroud. A method that will provide more control over replacements will be implemented some time in the future. For details, see below-quoted issue tracker. closes https://github.com/rsyslog/rsyslog/issues/713 - omelasticsearch: craft better URLs Elasticsearch is confused by url's ending in a bare '?' or '&'. While this is valid, those are no longer produced. Thanks to Benno Evers for the patch. - imfile: add experimental "reopenOnTruncate" parameter Thanks to Matthew Wang for the patch. - bugfix imfile: proper handling of inotify initialization failure Thanks to Zachary Zhao for the patch. - bugfix imfile: potential segfault due to improper handling of ev var This occurs in inotify mode, only. Thanks to Zachary Zhao and Peter Portante for the patch. closes https://github.com/rsyslog/rsyslog/issues/718 - bugfix imfile: potential segfault under heavey load. This occurs in inotify mode when using wildcards, only. The root cause is dropped IN_IGNOPRED inotify events which be dropped in circumstance of high input pressure and frequent rotation, and according to wikipeida, they can also be dropped in other conditions. Thanks to Zachary Zhao for the patch. closes https://github.com/rsyslog/rsyslog/issues/723 - bugfix ommail: invalid handling of server response if that response was split into different read calls. Could lead to error-termination of send operation. Problem is pretty unlikely to occur in standard setups (requires slow connection to SMTP server). Thank to github user haixingood for the patch. - bugfix omelasticsearch: custom serverport was ignored on some platforms Thanks to Benno Evers for the patch. - bugfix: tarball did not include some testbench files Thanks to Thomas D. (whissi) for the patch. - bugfix: memory misadressing during config parsing string template This occurred if an (invalid) template option larger than 63 characters was given. Thanks to git hub user c6226 for the patch. - bugfix imzmq: memory leak Thanks to Jeremy Liang for the patch. - bugfix imzmq: memory leak Thanks to github user xushengping for the patch. - bugfix omzmq: memory leak Thanks to Jack Lin for the patch. - some code improvement and cleanup ------------------------------------------------------------------------------ Version 8.15.0 [v8-stable] 2015-12-15 - KSI Lib: Updated code to run with libksi 3.4.0.5 Also libksi 3.4.0.x is required to build rsyslog if ksi support is enabled. New libpackages have been build as well. - KSI utilities: Added option to ser publication url. Since libksi 3.4.0.x, there is no default publication url anymore. The publication url has to be set using the --publications-server Parameter, otherwise the ksi signature cannot be verified. UserID and UserKey can also be set by parameter now. Closes https://github.com/rsyslog/rsyslog/issues/581 - KSI Lib: Fixed wrong TLV container for KSI signatures from 0905 to 0906. closes https://github.com/rsyslog/rsyslog/issues/587 - KSI/GT Lib: Fixed multiple issues found using static analyzer - performance improvement for configs with heavy use of JSON variables Depending on the config, this can be a very big gain in performance. - added pmpanngfw: contributed module for translating Palo Alto Networks logs. see also: https://github.com/rsyslog/rsyslog/pull/573 Thanks to Luigi Mori for the contribution. - testbench: Changed valgrind option for imtcp-tls-basic-vg.sh For details see: https://github.com/rsyslog/rsyslog/pull/569 - pmciscoios: support for asterisk before timestamp added thanks to github user c0by for the patch see also: https://github.com/rsyslog/rsyslog/pull/583 - solr external output plugin much enhanced see also: https://github.com/rsyslog/rsyslog/pull/529 Thanks to Radu Gheorghe for the patch. - omrabbitmq: improvements thanks to Luigi Mori for the patch see also: https://github.com/rsyslog/rsyslog/pull/580 - add support for libfastjson (as a replacement for json-c) - KSI utilities: somewhat improved error messages Thanks to Henri Lakk for the patch. see also: https://github.com/rsyslog/rsyslog/pull/588 - pmciscoios: support for some format variations Thanks to github user c0by for the patch - support grok via new contributed module mmgrok Thanks to 饶琛琳 (github user chenryn) for the contribution. - omkafka: new statistics counter "maxoutqsize" Thanks to 饶琛琳 (github user chenryn) for the contribution. - improvments for 0mq modules: * omczmq - suspend / Retry handling - the output plugin can now recover from some error states due to issues with plugin startup or message sending * omczmq - refactored topic handling code for ZMQ_PUB output to be a little more efficient * omczmq - added ability to set a timeout for sends * omczmq - set topics can be in separate frame (default) or part of message frame (configurable) * omcmzq - code cleanup * imczmq - code cleanup * imczmq - fixed a couple of cases where vars could be used uninitialized * imczmq - ZMQ_ROUTER support * imczmq - Fix small memory leak from not freeing sockets when done with them * allow creation of on demand ephemeral CurveZMQ certs for encryption. Clients may specify clientcertpath="*" to indicate they want an on demand generated cert. Thanks to Brian Knox for the contributions. - cleanup on code to unset a variable under extreme cases (very, very unlikely), the old code could also lead to errornous processing - omelasticsearch: build on FreeBSD Thanks to github user c0by for the patch - pmciscoios: fix some small issues clang static analyzer detected - testbench: many improvements and some new tests note that there still is a number of tests which are somewhat racy - overall code improvements thanks to clang static analyzer - gnutls fix: Added possible fix for gnutls issue #575 see also: https://github.com/rsyslog/rsyslog/issues/575 Thanks to Charles Southerland for the patch - bugfix omkafka: restore ability to build on all platforms Undo commit aea09800643343ab8b6aa205b0f10a4be676643b because that lead to build failures on various important platforms. This means it currently is not possible to configure the location of librdkafka, but that will affect far fewer people. closes: https://github.com/rsyslog/rsyslog/issues/596 - bugfix omkafka: fix potentially negative partition number Thanks to Tait Clarridge for providing a patch. - bugfix: solve potential race in creation of additional action workers Under extreme circumstances, this could lead to segfault. Note that we detected this problem thanks to ASAN address sanitzier in combination with a very exterme testbench test. We do not think that this issue was ever reported in practice. - bugfix: potential memory leak in config parsing Thanks to github user linmujia for the patch - bugfix: small memory leak in loading template config This happened when a plugin was used inside the template. Then, the memory for the template name was never freed. Thanks to github user xushengping for the fix. - bugfix: fix extra whitespace in property expansions Address off-by-one issues introduced in f3bd7a2 resulting in extra whitespace in property expansions Thanks to Matthew Gabeler-Lee for the patch. - bugfix: mmfields leaked memory if very large messages were processed detected by clang static analyzer - bugfix: mmfields could add garbagge data to field this happened when very large fields were to be processed. Thanks to Peter Portante for reporting this. - bugfix: omhttpfs now also compiles with older json-c lib - bugfix: memory leak in (contributed) module omhttpfs Thanks to git hub user c6226 for the patch. - bugfix: parameter mismatch in error message for wrap() function - bugfix: parameter mismatch in error message for random() function - bugfix: divide by zero if max() function was provided zero - bugfix: invalid mutex handling in omfile async write mode could lead to segfault, even though highly unlikely (caught by testbench on a single platform) - bugfix: fix inconsistent number processing Unfortunately, previous versions of the rule engine tried to support oct and hex, but that wasn't really the case. Everything based on JSON was just dec-converted. As this was/is the norm, we fix that inconsistency by always using dec. Luckly, oct and hex support was never documented and could probably only have been activated by constant numbers. - bugfix: timezone() object: fix NULL pointer dereference This happened during startup when the offset or id parameter was not given. Could lead to a segfault at startup. Detected by clang static analyzer. - bugfix omfile: memory addressing error if very long outchannel name used Thanks to github user c6226 for the patch. ------------------------------------------------------------------------------ Version 8.14.0 [v8-stable] 2015-11-03 - Added possibility to customize librdkafka location see also: https://github.com/rsyslog/rsyslog/pull/502 Thanks to Matthew Wang for the patch. - add property "rawmsg-after-pri" - bugfix: potential misadresseing in imfile Could happen when wildcards were used. see also https://github.com/rsyslog/rsyslog/issues/532 see also https://github.com/rsyslog/rsyslog/issues/534 Thanks to zhangdaoling for the bugfix. - bugfix: re_extract RainerScript function did not work Thanks to Janmejay Singh for the patch ------------------------------------------------------------------------------ Version 8.13.0 [v8-stable] 2015-09-22 - ZeroMQ enhancements: * Added the ability to set a static publishing topic per action as an alternative to constructing topics with templates Contributor: Luca Bocassi * ZMQ_PUB socket now defaults to bind and ZMQ_SUB socket now defaults to connect - Contributor: Luca Bocassi - Redis enhancements: * Can now LPUSH to a Redis list in "queue" mode - Contributor: Brian Knox * Can now PUBLISH to a Redis channel in "publish" mode Contributor: Brian Knox - build requirement for rsyslog/mmnormalize is now liblognorm 1.1.2 or above - mmnormalize: liblognorm error messages are now emitted via regular rsyslog error reporting mechanism (aka "are now logged") This is possible due to a new API in liblognorm 1.1.2; Note that the amount of error messages depends on the version of liblognorm used. - add support for TCP client side keep-alives Thanks to github user tinselcity for the patch. - bugfix: imtcp/TLS hangs on dropped packets see also https://github.com/rsyslog/rsyslog/issues/318 Thanks to github user tinselcity for the patch. - bugfix testbench: some tests using imptcp are run if module is disabled Thanks to Michael Biebl for reporting this see also https://github.com/rsyslog/rsyslog/issues/524 - bugfix omkafka: Fixes a bug not accepting new messages anymore. see also: https://github.com/rsyslog/rsyslog/pull/472 Thanks to Janmejay Singh - bugfix: Parallel build issue "cannot find ../runtime/.libs/librsyslog.a: No such file or directory" (#479) fixed. Thanks to Thomas D. (Whissi) for the patch. - bugfix: Added missing mmpstructdata testfiles into makefile. see also: https://github.com/rsyslog/rsyslog/issues/484 - bugfix: Reverted FIX for issue #392 as it had unexpected side effects. The new fix duplicates the Listener object for static files (like done for dynamic files already), resolving issue #392 and #490. see also https://github.com/rsyslog/rsyslog/pull/490 - bugfix: issues in queue subsystem if syncqueuefiles was enabled * Error 14 was generated on the .qi file directory handle. As the .qi filestream does not have a directory set, fsync was called on an empty directory causing a error 14 in debug log. * When queue files existed on startup, the bSyncQueueFiles strm property was not set to 1. This is now done in the qqueueLoadPersStrmInfoFixup function. - bugfix/testbench: tcpflood tool could abort when random data was added see also: https://github.com/rsyslog/rsyslog/issues/506 Thanks to Louis Bouchard for the fix - rscryutil: Added support to decrypt a not closed log file. Thanks to wizard1024 for the patch. ------------------------------------------------------------------------------ Version 8.12.0 [v8-stable] 2015-08-11 - Harmonize resetConfigVariables values and defaults see also https://github.com/rsyslog/rsyslog/pull/413 Thanks to Tomas Heinrich for the patch. - GT/KSI: fix some issues in signature file format and add conversion tool The file format is incompatible to previous format, but tools have been upgraded to handle both and also an option been added to convert from old to new format. - bugfix: ommysql did not work when gnutls was enabled as it turned out, this was due to a check for GnuTLS functions with the side-effect that AC_CHECK_LIB, by default, adds the lib to LIBS, if there is no explicit action, what was the case here. So everything was now linked against GnuTLS, which in turn made ommysql fail. Thanks to Thomas D. (whissi) for the analysis of the ommysql/gnutls problem and Thomas Heinrich for pointing out that AC_CHECK_LIB might be the culprit. - bugfix omfile: potential memory leak on file close see also: https://github.com/rsyslog/rsyslog/pull/423 Thanks to Robert Schiele for the patch. - bugfix omfile: potential race in dynafile detection/creation This could lead to a segfault. Thanks to Tomas Heinrich for the patch. - bugfix omfile: Fix race-condition detection in path-creation code The affected code is used to detect a race condition in between testing for the existence of a directory and creating it if it didn't exist. The variable tracking the number of attempts wasn't reset for subsequent elements in the path, thus limiting the number of reattempts to one per the whole path, instead of one per each path element. This solution was provided by Martin Poole. - bugfix parser subsystem: potential misadressing in SanitizeMsg() could lead to a segfault Thanks to Tomas Heinrich for the patch. - imfile: files moved outside of directory are now (properly) handled - bugfix: imfile: segfault when using startmsg.regex if first log line doesn't match Thanks to Ciprian Hacman for the patch. - bugfix imfile: file table was corrupted when on file deletion This could happen when a file that was statically configured (not via an wildcard) was deleted. - bugfix ompgsql: transaction were improperly handled now transaction support is solidly disabled until we have enough requests to implement it again. Module still works fine in single insert mode. closes https://github.com/rsyslog/rsyslog/issues/399 - bugfix mmjsonparse: memory leak if non-cee-json message is processed see also https://github.com/rsyslog/rsyslog/pull/383 Thanks to Anton Matveenko for the patch - testbench: remove raciness from UDP based tests - testbench: added bash into all scripts makign it mandatory - bugfix testbench: Fixed problem building syslog_caller util when liblogging-stdlog is not available. Thanks to Louis Bouchard for the patch - bugfix rscryutil.1: Added fix checking for generate_man_pages condition Thanks to Radovan Sroka for the patch - bugfix freebsd console: \n (NL) is prepended with \r (CR) in console output on freebsd only. For more details see here: https://github.com/rsyslog/rsyslog/issues/372 Thanks to AlexandreFenyo for the patch ------------------------------------------------------------------------------ Version 8.11.0 [v8-stable] 2015-06-30 - new signature provider for Keyless Signature Infrastructure (KSI) added - build system: re-enable use of "make distcheck" - add new signature provider for Kesless Signature Infrastructure (KSI) This has also been added to existing tooling; KSI is kind of v2 of the Guardtime functionality and has been added in the appropriate places. - bugfix imfile: regex multiline mode ignored escapeLF option Thanks to Ciprian Hacman for reporting the problem closes https://github.com/rsyslog/rsyslog/issues/370 - bugfix omkafka: fixed several concurrency issues, most of them related to dynamic topics. Thanks to Janmejay Singh for the patch. - bugfix: execonlywhenpreviousissuspended did not work correctly This especially caused problems when an action with this attribute was configured with an action queue. - bugfix core engine: ensured global variable atomicity This could lead to problems in RainerScript, as well as probably in other areas where global variables are used inside rsyslog. I wouldn't outrule it could lead to segfaults. Thanks to Janmejay Singh for the patch. - bugfix imfile: segfault when using startmsg.regex because of empty log line closes https://github.com/rsyslog/rsyslog/issues/357 Thanks to Ciprian Hacman for the patch. - bugfix: build problem on Solaris Thanks to Dagobert Michelsen for reporting this and getting us up to speed on the openCWS build farm. - bugfix: build system strndup was used even if not present now added compatibility function. This came up on Solaris builds. Thanks to Dagobert Michelsen for reporting the problem. closes https://github.com/rsyslog/rsyslog/issues/347 - bugfix imjournal: do not pass empty messages to rsyslog core this causes a crash of the daemon see also https://github.com/rsyslog/rsyslog/pull/412 Thanks to Tomas Heinrich for the patch. - bugfix imjournal: cosmetic memory leak very small and an shutdown only, so did not affect operations see also https://github.com/rsyslog/rsyslog/pull/411 Thanks to Tomas Heinrich for the patch. ------------------------------------------------------------------------------ Version 8.10.0 [v8-stable] 2015-05-19 - imfile: add capability to process multi-line messages based on regex input parameter "endmsg.regex" was added for that purpose. The new mode provides much more power in processing different multiline-formats. - pmrfc3164: add new parameters * "detect.yearAfterTimestamp" This supports timestamps as generated e.g. by some Aruba Networks equipment. * "permit.squareBracesInHostname" Permits to use "hostnames" in the form of "[127.0.0.1]"; also seen in Aruba Networks equipment, but we strongly assume this can also happen in other cases, especially with IPv6. - supplementary groups are now set when dropping privileges closes https://github.com/rsyslog/rsyslog/issues/296 Thanks to Zach Lisinski for the patch. - imfile: added brace glob expansion to wildcard Thanks to Zach Lisinski for the patch. - zmq: add the ability for zeromq input and outputs to advertise their presence on UDP via the zbeacon API. Thanks to Brian Knox for the contribution. - added omhttpfs: contributed module for writing to HDFS via HTTP Thanks to sskaje for the contribution. - Configure option "--disable-debug-symbols" added which is disabled per default. If you set the new option, configure won't set the appropriate compiler flag to generate debug symbols anymore. - When building from git source we now require rst2man and yacc (or a replacement like bison). That isn't any new requirement, we only added missing configure checks. - Configure option "--enable-generate-man-pages" is now disabled for non git source builds per default but enforced when building from git source. - mmpstrucdata: some code cleanup removed lots of early development debug outputs - bugfix imuxsock: fix a memory leak that happened with large messages ... when annotation was enabled. Thanks to github user c6226 for the patch - bugfix omhttpfs: memory leak Thanks to github user c6226 for the patch - bugfix imuxsock: fix a crash when setting a hostname Setting a hostname via the legacy directive would lead to a crash during shutdown caused by a double-free. Thanks to Tomas Heinrich for the patch. - bugfix: memory leak in mmpstrucdata Thanks to Grégoire Seux for reporting this issue. closes https://github.com/rsyslog/rsyslog/issues/310 - bugfix (minor): default action name: assigned number was one off see also https://github.com/rsyslog/rsyslog/pull/340 Thanks to Tomas Heinrich for the patch. - bugfix: memory leak in imfile A small leak happened each time a new file was monitored based on a wildcard. Depending on the rate of file creation, this could result in a serious memory leak. ------------------------------------------------------------------------------ Version 8.9.0 [v8-stable] 2015-04-07 - omprog: add option "hup.forward" to forwards HUP to external plugins This was suggested by David Lang so that external plugins (and other programs) can also do HUP-specific processing. The default is not to forward HUP, so no change of behavior by default. - imuxsock: added capability to use regular parser chain Previously, this was a fixed format, that was known to be spoken on the system log socket. This also adds new parameters: - sysSock.useSpecialParser module parameter - sysSock.parseHostname module parameter - useSpecialParser input parameter - parseHostname input parameter - 0mq: improvements in input and output modules See module READMEs, part is to be considered experimental. Thanks to Brian Knox for the contribution. - imtcp: add support for ip based bind for imtcp -> param "address" Thanks to github user crackytsi for the patch. - bugfix: MsgDeserialize out of sync with MsgSerialize for StrucData This lead to failure of disk queue processing when structured data was present. Thanks to github user adrush for the fix. - bugfix imfile: partial data loss, especially in readMode != 0 closes https://github.com/rsyslog/rsyslog/issues/144 - bugfix: potential large memory consumption with failed actions see also https://github.com/rsyslog/rsyslog/issues/253 - bugfix: omudpspoof: invalid default send template in RainerScript format The file format template was used, which obviously does not work for forwarding. Thanks to Christopher Racky for alerting us. closes https://github.com/rsyslog/rsyslog/issues/268 - bugfix: size-based legacy config statements did not work properly on some platforms, they were incorrectly handled, resulting in all sorts of "interesting" effects (up to segfault on startup) - build system: added option --without-valgrind-testbench ... which provides the capability to either enforce or turn off valgrind use inside the testbench. Thanks to whissi for the patch. - rsyslogd: fix misleading typos in error messages Thanks to Ansgar Püster for the fixes. ------------------------------------------------------------------------------ Version 8.8.0 [v8-stable] 2015-02-24 - omkafka: add support for dynamic topics and auto partitioning Thanks to Tait Clarridge for the patches. - imtcp/imptcp: support for broken Cisco ASA TCP syslog framing - omfwd: more detailled error messages in case of UDP send error - TLS syslog: enable capability to turn on GnuTLS debug logging This provides better diagnostics in hard-to-diagnose cases, especially when GnuTLS is extra-picky about certificates. - bugfix: $AbortOnUncleanConfig did not work - improve rsyslogd -v output and error message with meta information version number is now contained in error message and build platform in version output. This helps to gets rid of the usual "which version" question on mailing list, support forums, etc... - bugfix imtcp: octet-counted framing cannot be turned off - bugfix: build problems on Illuminos Thanks to Andrew Stormont for the patch - bugfix: invalid data size for iMaxLine global property It was defined as int, but inside the config system it was declared as size type, which uses int64_t. With legacy config statements, this could lead to misadressing, which usually meant the another config variable was overwritten (depending on memory layout). closes https://github.com/rsyslog/rsyslog/issues/205 - bugfix: negative values for maxMessageSize global parameter were permitted ------------------------------------------------------------------------------ Version 8.7.0 [v8-stable] 2015-01-13 - add message metadata "system" to msg object this permits to store metadata alongside the message - imfile: add support for "filename" metadata this is useful in cases where wildcards are used - imptcp: make stats counter names consistent with what imudp, imtcp uses - added new module "omkafka" to support writing to Apache Kafka - omfwd: add new "udp.senddelay" parameter - mmnormalize enhancements Thanks to Janmejay Singh for the patch. - RainerScript "foreach" iterator and array reading support Thanks to Janmejay Singh for the patch. - now requires liblognorm >= 1.0.2 - add support for systemd >= 209 library names - BSD "ntp" facility (value 12) is now also supported in filter Thanks to Douglas K. Rand of Iteris, Inc. for the patch. Note: this patch was released under ASL 2.0 (see email-conversation). - bugfix: global(localHostName="xxx") was not respected in all modules - bugfix: emit correct error message on config-file-not-found closes https://github.com/rsyslog/rsyslog/issues/173 - bugfix: impstats emitted invalid JSON format (if JSON was selected) - bugfix: (small) memory leak in omfile's outchannel code Thanks to Koral Ilgun for reporting this issue. - bugfix: imuxsock did not deactivate some code not supported by platform Among potential other problemns, this caused build failure under Solaris. Note that this build problem just made a broader problem appear that so far always existed but was not visible. closes https://github.com/rsyslog/rsyslog/issues/185 ------------------------------------------------------------------------------ Version 8.6.0 [v8-stable] 2014-12-02 NOTE: This version also incorporates all changes and enhancements made for v8.5.0, but in a stable release. For details see immediately below. - configuration-setting rsyslogd command line options deprecated For most of them, there are now proper configuration objects. Some few will be completely dropped if nobody insists on them. Additional info at http://blog.gerhards.net/2014/11/phasing-out-legacy-command-line-options.html - new and enhanced plugins for 0mq. These are currently experimantal. Thanks to Brian Knox who contributed the modules and is their author. - empty rulesets have been permitted. They no longer raise a syntax error. - add parameter -N3 to enable config check of partial config file Use for config include files. Disables checking if any action exists at all. - rsyslogd -e option has finally been removed It is deprectated since many years. - testbench improvements Testbench is now more robust and has additional tests. - testbench is now by default disabled To enable it, use --enable-testbench. This was done as the testbench now does better checking if required modules are present and this in turn would lead to configure error messages where non previously were if we would leave --enable-testbench on by default. Thus we have turned it off. This should not be an issue for those few testbench users. - add new RainerScript functions warp() and replace() Thanks to Singh Janmejay for the patch. - mmnormalize can now also work on a variable Thanks to Singh Janmejay for the patch. - new property date options for day ordinal and week number Thanks to github user arrjay for the patch - remove --enable-zlib configure option, we always require it It's hard to envision a system without zlib, so we turn this off closes https://github.com/rsyslog/rsyslog/issues/76 - slight source-tree restructuring: contributed modules are now in their own ./contrib directory. The idea is to make it clearer to the end user which plugins are supported by the rsyslog project (those in ./plugins). - bugfix: imudp makes rsyslog hang on shutdown when more than 1 thread used closes https://github.com/rsyslog/rsyslog/issues/126 - bugfix: not all files closed on auto-backgrounding startup This could happen when not running under systemd. Some low-numbered fds were not closed in that case. - bugfix: typo in queue configuration parameter made parameter unusable Thanks to Bojan Smojver for the patch. - bugfix: unitialized buffer off-by-one error in hostname generation The DNS cache used uninitialized memory, which could lead to invalid hostname generation. Thanks to Jarrod Sayers for alerting us and provinding analysis and patch recommendations. - bugfix imuxsock: possible segfault when SysSock.Use="off" Thanks to alexjfisher for reporting this issue. closes https://github.com/rsyslog/rsyslog/issues/140 - bugfix: RainerScript: invalid ruleset names were accepted during ruleset defintion, but could of course not be used when e.g. calling a ruleset. IMPORTANT: this may cause existing configurations to error out on start, as they invalid names could also be used e.g. when assigning rulesets. - bugfix: some module entry points were not called for all modules callbacks like endCnfLoad() were primarily being called for input modules. This has been corrected. Note that this bugfix has some regression potential. - bugfix omlibdbi: connection was taken down in wrong thread this could have consequences depending on the driver being used. In general, it looks more like a cosmetic issue. For example, with MySQL it lead to a small memory but also an annoying message about a thread not properly torn down. - imttcp was removed because it was an incompleted experimental module - pmrfc3164sd because it was a custom module nobody used We used to keep this as a sample inside the tree, but whoever wants to look at it can check in older versions inside git. - omoracle was removed because it was orphaned and did not build/work for quite some years and nobody was interested in fixing it --------------------------------------------------------------------------- Version 8.5.0 [v8-stable] 2014-10-24 - imfile greatly refactored and support for wildcards added - PRI-handling code refactored for more clarity and robustness - ommail: add support for RainerScript config system [action() object] This finally adds support for the new config style. Also, we now permit to set a constant subject text without the need to create a template for it. - refactored the auto-backgrounding method The code is now more robust and also offers possibilities for enhanced error reporting in the future. This is also assumed to fix some races where a system startup script hang due to "hanging" rsyslogd. - make gntls tcp syslog driver emit more error messages Messages previously emitted only to the debug log are now emitted as syslog error messages. It has shown that they contain information helpful to the user for troubleshooting config issues. Note that this change is a bit experimental, as we are not sure if there are situations where large amounts of error messages may be emitted. - bugfix: imfile did not complain if configured file did not exist closes https://github.com/rsyslog/rsyslog/issues/137 - bugfix: build failure on systems which don't have json_tokener_errors Older versions of json-c need to use a different API (which don't exists on newer versions, unfortunately...) Thanks to Thomas D. for reporting this problem. - imgssapi: log remote peer address in some error messages Thanks to Bodik for the patch. --------------------------------------------------------------------------- Version 8.4.3 [v8-stable] 2014-10-?? - ommail: minor bugfixes & improvements * timestamps were 1 hour out when using daylight saving times when viewing emails in most email clients due to incorrect date format * X-Mailer header had a typo in it * To: header was duplicated once per recipient (this is permitted, but an address list is a better choice nowadays) Thanks to github user cacheus for the patches. - bugfix imkmsg: infinite loop on OpenVZ VMs Thanks to github user PaulSD for the patch closes https://github.com/rsyslog/rsyslog/pull/138 - bugfix: typo in queue configuration parameter made parameter unusable Thanks to Bojan Smojver for the patch. - bugfix: unitialized buffer off-by-one error in hostname generation The DNS cache used uninitialized memory, which could lead to invalid hostname generation. Thanks to Jarrod Sayers for alerting us and provinding analysis and patch recommendations. - bugfix imfile: segfault on startup in "inotify" mode A segfault happened when more than one file was monitored. - bugfix imfile: could make rsyslog exit in inotify mode - bugfix: rsgtutil sometimes crashed in verify mode if file did not exist - bugfix imklog: pri was miscalculated actually, the pri was totally off the real value for PRIs > 9 - bugfix imfile:file processing in inotify mode was stalled sometimes closes https://github.com/rsyslog/rsyslog/issues/134 - bugfix: imjournal did not build properly The build succeeded, but the module did not load due to a type in a support function name, which kept unresolved during load. - bugfix: mmcount did no longer build note that this is untested -- users of this module should file a bug if the new (trivial) code is broken [if there are any users, thus I did not invest time in testing...] closes https://github.com/rsyslog/rsyslog/issues/129 - bugfix imuxsock: possible segfault when SysSock.Use="off" Thanks to alexjfisher for reporting this issue. closes https://github.com/rsyslog/rsyslog/issues/140 --------------------------------------------------------------------------- Version 8.4.2 [v8-stable] 2014-10-02 - bugfix: the fix for CVE-2014-3634 did not handle all cases This is corrected now. see also: CVE-2014-3683 - fixed a build problem on some platforms Thanks to Olaf for the patch - behaviour change: "msg" of messages with invalid PRI set to "rawmsg" When the PRI is invalid, the rest of the header cannot be valid. So we move all of it to MSG and do not try to parse it out. Note that this is not directly related to the security issue but rather done because it makes most sense. --------------------------------------------------------------------------- Version 8.4.1 [v8-stable] 2014-09-30 - imudp: add for bracketing mode, which makes parsing stats easier - permit at-sign in variable names closes: https://github.com/rsyslog/rsyslog/issues/110 - bugfix: fix syntax error in anon_cc_numbers.py script Thanks to github user anthcourtney for the patch. closes: https://github.com/rsyslog/rsyslog/issues/109 - bugfix: ompgsql: don't loose uncomitted data on retry Thanks to Jared Johnson and Axel Rau for the patch. - bugfix: imfile: if a state file for a different file name was set, that different file (name) was monitored instead of the configured one. Now, the state file is deleted and the correct file monitored. closes: https://github.com/rsyslog/rsyslog/issues/103 - bugfix: omudpspoof: source port was invalid Thanks to Pavel Levshin for the patch - bugfix: build failure on systems which don't have json_tokener_errors Older versions of json-c need to use a different API (which don't exists on newer versions, unfortunately...) Thanks to Thomas D. for reporting this problem. - bugfix: omelasticsearch does not work with broken/changed ES 1.0+ API closes: https://github.com/rsyslog/rsyslog/issues/104 - bugfix: mmanon did not properly anonymize IP addresses starting with '9' Thanks to defa-at-so36.net for reporting this problem. closes: http://bugzilla.adiscon.com/show_bug.cgi?id=529 - bugfix: build problems on SuSe Linux Thanks Andreas Stieger for the patch - bugfix: omelasticsearch error file did not work correctly on ES 1.0+ due to a breaking change in the ElasticSearch API. see also: https://github.com/rsyslog/rsyslog/issues/104 - bugfix: potential abort when a message with PRI > 191 was processed if the "pri-text" property was used in active templates, this could be abused to a remote denial of service from permitted senders see also: CVE-2014-3634 --------------------------------------------------------------------------- Version 8.4.0 [v8-stable] 2014-08-18 - this is the new stable branch, which incorporates all enhancements of rsyslog 8.3. --------------------------------------------------------------------------- Version 8.3.5 [v8-devel] 2014-08-05 - mmjsonparse: support selectable cookie and target containers This permits to put different meanings into a json formatted syslog message, e.g. the "traditional" cee or cim data. - bugfix: mmjsonparse did not build with json-c < 0.10 This was a regression introduced some time in the past in order to support API changes in json-c. Now we check for the version and use proper code. - omprog: emit error message via syslog() if loading binary fails This happens after forking, so omprog has no longer access to rsyslog's regular error reporting functions. Previously, this meant any error message was lost. Now it is emitted via regular syslog (which may end up in a different instance, if multiple instances run...) - couple of patches imported from v7-stable (7.6.4) --------------------------------------------------------------------------- Version 8.3.4 [v8-devel] 2014-07-11 - new pmciscoios parser supporting various Cisco IOS formats - RFC3164 timestamp parser now accepts timezones and subsecond resolution ... at least for some common formats and where we could do so without running risk of breaking proper formats (or introducing regressions) - new parser config object -- permits to define custom parser definitions - new tzinfo config object -- permits to define time zone offsets This is a utility object that currently is being used by some parsers. - bugfix: mishandling of input modules not supporting new input instances If they did not support this, accidently the output module part of the module union was written, leading to unpredictable results. Note: all core modules do support this interface, but some contributed or very old ones do not. - bugfix: double-free when ruleset() parser parameters were used While unlikely, this could cause stability issues even after the config phase. --------------------------------------------------------------------------- Version 8.3.3 [v8-devel] 2014-06-26 - unify input object naming imudp now supports "name" parameter, as other inputs do. "inputname" has been deprecated, but can still be used. Same applies to "appendport" subparameter". Thanks to "Nick Syslog" for the suggestion. - made the missing (contributed) modules build under v8 [import from 8.2.2] Modules: * mmrfc5424addhmac * omrabbitmq * omgssapi * omhdfs * omzmq3 - added a cleanup process (janitor); permits to close omfile files after a timeout - make omgssapi build under v8.3 [import vom v8.2] note that we could do this to the stable, because there is NO regression chance at all: only omgssapi was changed, and this module did NOT work previously. - removed obsolete --disable-fsstnd configure option Thanks to Thomas D. for alerting us. Closes: https://github.com/rsyslog/rsyslog/issues/72 --------------------------------------------------------------------------- Version 8.3.2 [v8-devel] 2014-05-02 - new template options for date extraction: - year - month - day - wday - hour - minute - second - tzoffshour - tzoffsmin - tzoffsdirection - wdayname For string templates, these are property options and they are prefixed with "date-" (e.g. "date-year", "date-month", ...) see also: https://github.com/rsyslog/rsyslog/issues/65 - bugfix: mmexternal remove framing char before processing JSON reply This did not have any real bad effects, but caused unnecessary processing, as empty replies were not properly detected. Otherwise, the bug was not noticible from the user's PoV. - bugfix: mmexternal segfault due to invalid free in non-json input mode closes: https://github.com/rsyslog/rsyslog/issues/70 - bugfix: mmexternal segfault when external plugin sent invalid reply ... or no reply at all. This happened if the reply was imporper JSON. Now, we emit an error message in those cases. see also: https://github.com/rsyslog/rsyslog/issues/69 - bugfix: mmexternal did potentially pass incomplete data to restarted external plugin This could happen if EPIPE was returned "too late", in which case the beginning of the data could be lost. - bugfix: mmexternal did not properly process messages over 4KiB The data to be passed to the external plugin was truncated after 4KiB. see: https://github.com/rsyslog/rsyslog/issues/64 - imrelp: added support for per-listener ruleset and inputname see: https://github.com/rsyslog/rsyslog/pull/63 Thanks to bobthesecurityguy github user for the patch --------------------------------------------------------------------------- Version 8.3.1 [v8-devel] 2014-04-24 - external message modification interface now support modifying message PRI - "jsonmesg" property will include uuid only if one was previously generated This is primarily a performance optimization. Whenever the message uuid is gotten, it is generated when not already present. As we used the regular setter, this means that always the uuid was generated, which is quite time-consuming. This has now been changed so that it only is generated if it already exists. That also matches more closly the semantics, as "jsonmesg" should not make modifications to the message. Note that the same applies to "fulljson" passing mode for external plugins. - added plugin to rewrite message facility and/or severity Name: fac-sever-rewrite.py - permits to build against json-c 0.12 Unfortunately, json-c had an ABI breakage, so this is necessary. Note that versions prior to 0.12 had security issues (CVE-2013-6370, CVE-2013-6371) and so it is desirable to link against the new version. Thanks to Thomas D. for the patch. Note that at least some distros have fixed the security issue in older versions of json-c, so this seems to apply mostly when building from sources. - bugfix: using UUID property could cause segfault - bugfix/mmexternal: memory leak - bugfix: memory leak when using "jsonmesg" property - bugfix: mmutf8fix did not detect two invalid sequences Thanks to Axel Rau for the patch. - bugfix: build problems with lexer.l on some platforms For some reason, the strdup() prototype and others are missing. I admit that I don't know why, as this happens only in 8.3.0+ and there is no indication of changes to the affected files. In any case, we need to fix this, and the current solution works at least as an interim one. --------------------------------------------------------------------------- Version 8.3.0 [v8-devel] 2014-04-10 - new plugin for anonymizing credit card numbers Thanks to Peter Slavov for providing the code. - external message modification modules are now supported They are bound via the new native module "mmexternal". Also, a sample skeleton for an external python message modification module has been added. - new $jsonmesg property with JSON representation of whole message object closes: https://github.com/rsyslog/rsyslog/issues/19 - improved error message for invalid field extraction in string template see also: http://kb.monitorware.com/problem-with-field-based-extraction-t12299.html - fix build problems on Solaris - NOTE: a json-c API that we begun to use requires the compiler to be in c99 mode. By default, we select it automatically. If you modify this and use gcc, be sure to include "-std=c99" in your compiler flags. This seems to be necessary only for older versions of gcc. --------------------------------------------------------------------------- Version 8.2.3 [v8-stable] 2014-??-?? - bugfix: ommysql: handle/mem leak upon termination of worker thread This could become bad if the (instance) worker threads are often started and terminated. But it takes quite a while to show effect. --------------------------------------------------------------------------- Version 8.2.2 [v8-stable] 2014-06-02 - made the missing (contributed) modules build under v8 Note that we could do this to the stable, because there is NO regression chance at all: only the modules themselves were changed, and they did NOT work at all previously. Please also note that most of these modules did not yet receive real testing. As we don't have the necessary environments (easily enough available), we depend on users submitting error reports and helping to iron out any issues that may arise. Modules: * mmrfc5424addhmac * omrabbitmq * omgssapi * omhdfs * omzmq3 --------------------------------------------------------------------------- Version 8.2.1 [v8-stable] 2014-04-17 - permits to build against json-c 0.12 Unfortunately, json-c had an ABI breakage, so this is necessary. Note that versions prior to 0.12 had security issues (CVE-2013-6370, CVE-2013-6371) and so it is desirable to link against the new version. Thanks to Thomas D. for the patch. Note that at least some distros have fixed the security issue in older versions of json-c, so this seems to apply mostly when building from sources. - doc is no longer shipped as part of the rsyslog tarball Instead, the rsyslog-doc project creates its own tarball. This is the result of a mailing list discussion after the 8.2.0 release with a tarball-in-tarball approach, which was disliked by almost all distro maintainers. This move also has the advantage of de-coupling the release cycles of both projects a bit (which turned out to be a bit problematic in practice). - bugfix: mmutf8fix did not detect two invalid sequences Thanks to Axel Rau for the patch. --------------------------------------------------------------------------- Version 8.2.0 [v8-stable] 2014-04-02 This starts a new stable branch based on 8.1.6 plus the following changes: - we now use doc from the rsyslog-doc project As such, the ./doc subtree has been removed. Instead, a cache of the rsyslog-doc project's files has been included in ./rsyslog-doc.tar.gz. Note that the exact distribution mode for the doc is still under discussion and may change in future releases. This was agreed upon on the rsyslog mailing list. For doc issues and corrections, be sure to work with the rsyslog-doc project. It is currently hosted at https://github.com/rsyslog/rsyslog-doc - add support for specifying the liblogging-stdlog channel spec new global parameter "stdlog.channelspec" - add "defaultnetstreamdrivercertfile" global variable to set a default for the certfile. Thanks to Radu Gheorghe for the patch. - omelasticsearch: add new "usehttps" parameter for secured connections Thanks to Radu Gheorghe for the patch. - "action resumed" message now also specifies module type which makes troubleshooting a bit easier. Note that we cannot output all the config details (like destination etc) as this would require much more elaborate code changes, which we at least do not like to do in the stable version. - add capability to override GnuTLS path in build process Thanks to Clayton Shotwell for the patch - better and more consistent action naming, action queues now always contain the word "queue" after the action name - bugfix: ompipe did resume itself even when it was still in error See: https://github.com/rsyslog/rsyslog/issues/35 Thanks to github user schplat for reporting - bugfix: ompipe used invalid default template This is a regression from an old change (didn't track it down precisely, but over a year ago). It used the Forwarding template instead of the file template (so we have a full syslog header). This fix corrects it back to previous behaviour, but new scripts that used the wrong format may now need to have the RSYSLOG_ForwardingFormat template explicitely be applied. closes: https://github.com/rsyslog/rsyslog/issues/50 --------------------------------------------------------------------------- Version 8.1.6 [release candidate] 2014-02-20 - omfile: permit to set global defaults for action parameters Thanks to Nathan Brown for the patch. See also: https://github.com/rsyslog/rsyslog/pull/23 - add capability to escape control characters in the C way of doing it adds new global parameter "parser.escapeControlCharactersCStyle" Thanks to Nathan Brown for the patch. See also: https://github.com/rsyslog/rsyslog/pull/13 - parser global parameters can now be set using RainerScript global() Thanks to Nathan Brown for the patch. See also: https://github.com/rsyslog/rsyslog/pull/23 - omprog: guard program-to-be-executed against CTL-C This can frequently happen in debug mode, where rsyslog is terminated by ctl-c. In any case, SIGINT is not meant to control the child process, so it should be blocked. - omprog bugfix: parameter "forceSingleInstance" is NOT mandatory - add new jsonr property replacer option Thanks to Nathan Brown for the patch. - added external plugin interface - ommongodb: add authentication support (untested) Thanks to JT for the patch. See also: https://github.com/rsyslog/rsyslog/pull/17 - bugfix: json templates are improperly created Strings miss the terminating NUL character, which obviously can lead to all sorts of problems. See also: https://github.com/rsyslog/rsyslog/issues/27 Thanks to Alain for the analysis and the patch. - ompgsql bugfix: improper handling of auto-backgrounding mode If rsyslog was set to auto-background itself (default code behaviour, but many distros now turn it off for good reason), ompgsql could not properly connect. This could even lead to a segfault. The core reason was that a PG session handle was kept open over a fork, something that is explicitely forbidden in the PG API. Thanks to Alain for the analysis and the patch. - bugfix: ommongodb's template parameter was mandatory but should have been optional Thanks to Alain for the analysis and the patch. - bugfix: end of batch processing was not 100% correct. Could lead to outputs not properly wirting messages. At least omelasticsearch did not write anything to the database due to this bug. See: https://github.com/rsyslog/rsyslog/issues/10 Thanks to Radu Gheorghe for reporting the issue. --------------------------------------------------------------------------- Version 8.1.5 [devel] 2014-01-24 - omprog: ability to execute multiple program instances per action It can now execute one program instance per worker thread. This is generally a very good thing the have performance wise. Usually, this should cause no problems with the invoked program. For that reason, we have decided to make this the default mode of operation. If not desired, it can be turned off via the 'forceSingleInstance="on"' action parameter. CHANGE OF BEHAVIOUR: previous versions did always execute only one instance per action, no matter how many workers were active. If your program has special needs, you need to change your configuration. - imfile now supports inotify (but must be explicitely turned on) - imfile no longer has a limit on number of monitored files - added ProcessInternalMessages global system parameter This permits to inject rsyslog status messages into *another* main syslogd or the journal. - new dependency: liblogging-stdlog (for submitting to external logger) - bugfix: imuxsock input parameters were not accepted due to copy&paste error. Thanks to Andy Goldstein for the fix. --------------------------------------------------------------------------- Version 8.1.4 [devel] 2014-01-10 - add exec_template() RainerScript function - imrelp: support for TCP KEEPALIVE added - bumped librelp dependency to 1.2.2 to support new KEEPALIVE feature - Add directives for numerically specifying GIDs/UIDs The already present directives (FileOwner, FileGroup, DirOwner, DirGroup) translate names to numerical IDs, which depends on the user information being available during rsyslog's startup. This can fail if the information is obtained over a network or from a service such as SSSD. The new directives provide a way to specify the numerical IDs directly and bypass the lookup. Thanks to Tomas Heinrich for the patch. - bugfix: action commitTransaction() processing did not properly handle suspended actions - bugfix: omelasticsearch fail.es stats counter was improperly maitained --------------------------------------------------------------------------- Version 8.1.3 [devel] 2013-12-06 THIS VERSION CAN BE CONSIDERED A "NORMAL" DEVEL RELEASE. It's no longer highly experimental. This assertion is based on real-world feedback. - changes to the strgen module interface - new output module interface for transactional modules - performance improvements * reduced number of malloc/frees due to further changes to the output module interface * reduced number of malloc/frees during string template processing We now re-use once allocated string template memory for as long as the worker thread exists. This saves us from doing new memory allocs (and their free counterpart) when the next message is processed. The drawback is that the cache always is the size of the so-far largest message processed. This is not considered a problem, as in any case a single messages' memory footprint should be far lower than that of a whole set of messages (especially on busy servers). * used variable qualifiers (const, __restrict__) to hopefully help the compiler generate somewhat faster code - failed action detection more precisely for a number of actions If an action uses string parameter passing but is non-transactional it can be executed immediately, giving a quicker indicatio of action failure. - bugfix: limiting queue disk space did not work properly * queue.maxdiskspace actually initializes queue.maxfilesize * total size of queue files was not checked against queue.maxdiskspace for disk assisted queues. Thanks to Karol Jurak for the patch. --------------------------------------------------------------------------- Version 8.1.2 [experimental] 2013-11-28 - support for liblognorm1 added - results in performance improvements Thanks to Pavel Levshin for his work in this regard. - support for jemalloc added via --enable-jemalloc Thanks to Pavel Levshin for suggesting jemalloc Note that build system is experimental at this stage. - queue defaults have changed * high water mark is now dynamically 90% of queue size * low water makr is now dynamically 70% of queue size * queue.discardMark is now dynamically 98% of queue size * queue.workerThreadMinimumMessage set to queue.size / num workers For queues with very low queue.maxSize (< 100), "emergency" defaults will be used. - bugfix: disk queues created files in wrong working directory if the $WorkDirectory was changed multiple times, all queues only used the last value set. - bugfix: legacy directive $ActionQueueWorkerThreads was not honored - bugfix: mmrfc5424addhmac: "key" parameter was not properly processed --------------------------------------------------------------------------- Version 8.1.1 [experimental] 2013-11-19 - bugfix: STOP/discard(~) was mostly NOT honored This lead to execution of config code that was not meant to be executed. - bugfix: memory leak on worker thread termination - bugfix: potential segfault in omfile under heavy load Thanks to Pavel Levshin for alerting us. - bugfix: mmsequence: instance mode did not work Thanks to Pavel Levshin for the patch - bugfix: segfault on startup when certain script constructs are used e.g. "if not $msg ..." - omhiredis: now supports v8 output module interface and works again Thanks to Pavel Levshin for the patch - mmaudit: now supports v8 output module interface and work again - bugfix: potential abort on startup in debug mode This depends on template type being used. The root cause was a non-necessary debug output, which were at the wrong spot (leftover from initial testing). Thanks to Pavel Levshin for alerting us and providing a patch proposal. --------------------------------------------------------------------------- Version 8.1.0 [experimental] 2013-11-15 - rewritten core engine for higher performance and new features In detail: * completely rewritten rule execution engine * completely changed output module interface * remodelled output module interface * enabled important output modules to support full concurrent operation The core engine has been considerably changed and must be considered experimental at this stage. Note that it does not yet include all features planned for v8, but is close to this goal. In theory, the engine should perform much better, especially on complex configurations and busy servers. Most importantly, actions instances can now be called concurrently from worker threads and many important output modules support multiple concurrent action instances natively. - module omruleset is no longer enabled by default. Note that it has been deprecated in v7 and been replaced by the "call" statement. Also, it can still be build without problems, the option must just explicitely be given. --------------------------------------------------------------------------- Version 7.6.8 [v7.6-stable] 2014-10-?? - bugfix: typo in queue configuration parameter made parameter unusable Thanks to Bojan Smojver for the patch. - bugfix imuxsock: possible segfault when SysSock.Use="off" Thanks to alexjfisher for reporting this issue. closes https://github.com/rsyslog/rsyslog/issues/140 - bugfix: unitialized buffer off-by-one error in hostname generation The DNS cache used uninitialized memory, which could lead to invalid hostname generation. Thanks to Jarrod Sayers for alerting us and provinding analysis and patch recommendations. - remove zpipe (a testing tool) from --enable-diagtools This tool is no longer maintained and currently not used inside the testbench. We keep it in the source tree for the time being in case that it may be used in the future. - bugfix: imjournal did not build properly The build succeeded, but the module did not load due to a type in a support function name, which kept unresolved during load. - bugfix imklog: pri was miscalculated actually, the pri was totally off the real value for PRIs > 9 - bugfix rsgtutil: sometimes crashed in verify mode if file did not exist - bugfix rsgtutil: some errors/problems at end of file were not reported * The verification function in rsgtutil tool did not report deletion of whole signed blocks of lines from the end of the log file. * The verification function in rsgtutil tool did not report extra (unsigned) lines at the end of the log file. Thanks to Henri Lakk for the patch. - bugfix: error: json_tokener_errors undeclared when overriding PKGCONFIG If PKGCONFIG settings for json-c were overriden, presence of json_tokener_errors was not properly detected. closes: https://github.com/rsyslog/rsyslog/issues/143 Thanks to Alex Fisher for alerting us and the patch. --------------------------------------------------------------------------- Version 7.6.7 [v7.6-stable] 2014-10-02 - bugfix: the fix for CVE-2014-3634 did not handle all cases This is corrected now. see also: CVE-2014-3683 - fixed a build problem on some platforms Thanks to Olaf for the patch - behaviour change: "msg" of messages with invalid PRI set to "rawmsg" When the PRI is invalid, the rest of the header cannot be valid. So we move all of it to MSG and do not try to parse it out. Note that this is not directly related to the security issue but rather done because it makes most sense. --------------------------------------------------------------------------- Version 7.6.6 [v7.6-stable] 2014-09-30 - bugfix: potential abort when a message with PRI > 191 was processed if the "pri-text" property was used in active templates, this could be abused to a remote denial of service from permitted senders see also: CVE-2014-3634 - bugfix: potential segfault on startup on 64 bit systems This happened immediately on startup during config processing. Once rsyslog got past this stage, it could not happen. - bugfix: build problems on SuSe Linux Thanks Andreas Stieger for the patch --------------------------------------------------------------------------- Version 7.6.5 [v7.6-stable] 2014-09-17 - bugfix: in 7.6.4, pri-based filters did not work correctly messages were distributed to the wrong bins. - bugfix: build problems on systems without atomic instructons e.g. RHEL 5; backport from v8 --------------------------------------------------------------------------- Version 7.6.4 [v7.6-stable] 2014-09-12 - add --enable-generate-man-pages configure switch (default: enabled) This forces generation of man pages, even if cached ones exists. This "fixes" a typical release tarball nit. While it is hackish, the benefit is clear given the history of failed tarball releases since we changed the cached man page handling. It was just too easy to get that wrong. - removed obsolete --disable-fsstnd configure option Thanks to Thomas D. for alerting us. Closes: https://github.com/rsyslog/rsyslog/issues/72 - permits to build against json-c 0.12 Unfortunately, json-c had an ABI breakage, so this is necessary. Note that versions prior to 0.12 had security issues (CVE-2013-6370, CVE-2013-6371) and so it is desirable to link against the new version. Thanks to Thomas D. for the patch. Note that at least some distros have fixed the security issue in older versions of json-c, so this seems to apply mostly when building from sources. - new omfile default module parameters * filecreatemode * fileowner * fileownernum * filegroup * filegroupnum * dirowner * dirownernum * dirgroup * dirgroupnum Thanks to Karol Jurak for the patch. - bugfix: memory leak in TCP TLS mode - bugfix: imfile: if a state file for a different file name was set, that different file (name) was monitored instead of the configured one. Now, the state file is deleted and the correct file monitored. closes: https://github.com/rsyslog/rsyslog/issues/103 - bugfix: using UUID property could cause segfault - bugfix: mmutf8fix did not detect two invalid sequences Thanks to Axel Rau for the patch. - bugfix: file descriptor leak with Guardtime signatures When a .gtstate file is opened it is never closed. This is especially bad when dynafiles frequently get evicted from dynafile cache and be re-opened again. - bugfix: busy loop in tcp listener when running out of file descriptors Thanks to Susant Sahani for the patch. - bugfix: mishandling of input modules not supporting new input instances If they did not support this, accidently the output module part of the module union was written, leading to unpredictable results. Note: all core modules do support this interface, but some contributed or very old ones do not. - bugfix: double-free when ruleset() parser parameters were used While unlikely, this could cause stability issues even after the config phase. - bugfix: output modules with parameters with multiple passing modes could caused strange behaviour including aborts This was due to the fact that the action module only preserved and processed the last set passing mode. Note that this was not a problem for the plugins provided by the rsyslog git: none of them uses different passing modes. Thanks to Tomas Heinrich for providing a very detailled bug report. - various fixes after coverty scan These do not address issues seen in practice but those seen by the tool. Some of them may affect practical deployments. Thanks to Tomas Heinrich for the patches. - bugfix imuxsock: "Last message repeated..." was not emitted at shutdown The "Last message repeated..." notice didn't get printed if rsyslog was shut down before the repetition was broken. Thanks to Tomas Heinrich for the patch. - bugfix: make dist failed when GUARDTIME or LIBGCRYPT feature was disabled - bugfix: mmjsonparse did not build with json-c < 0.10 This was a regression introduced some time in the past in order to support API changes in json-c. Now we check for the version and use proper code. - bugfix: mmanon did not properly anonymize IP addresses starting with '9' Thanks to defa-at-so36.net for reporting this problem. closes: http://bugzilla.adiscon.com/show_bug.cgi?id=529 --------------------------------------------------------------------------- Version 7.6.3 [v7.6-stable] 2014-03-27 - add capability to override GnuTLS path in build process Thanks to Clayton Shotwell for the patch - support for librelp 1.2.5 Support new return states of librelp 1.2.5 to emit better error messages For obvious reasons, librelp 1.2.5 is now required. - bugfix: ompipe used invalid default template This is a regression from an old change (didn't track it down precisely, but over a year ago). It used the Forwarding template instead of the file template (so we have a full syslog header). This fix corrects it back to previous behaviour, but new scripts that used the wrong format may now need to have the RSYSLOG_ForwardingFormat template explicitely be applied. closes: https://github.com/rsyslog/rsyslog/issues/50 - bugfix: ompipe did emit many suspension messages for /dev/xconsole (hopefully now) closes: https://github.com/rsyslog/rsyslog/issues/35 When it was present, but nobody reading from it. The problem is the way the rsyslog v7 engine tries to resolve failures in outputs. It does some retries, and along those lines some state information gets lost and it is close to impossible to retain it. However, the actual root problem is that ompipe does not reliably detect if it is able to recover. The problem here is that it actually does not know this before it does an actual write. These two things together mess up the logic that suppresses invalid resumption/suspension messages (actually, the plugin switches state really that often). Nevertheless, the prime problem with /dev/xconsole (and probably most other pipes as well) is that it gets full. So I have now added code that checks, during resume processing, if the pipe is writable. If it is not, resume is deferred. That should address the case. --------------------------------------------------------------------------- Version 7.6.2 [v7.6-stable] 2014-03-17 - support for librelp 1.2.4 This was necessary due to the problems with librelp 1.2.3 API stability. We now use the new native 1.2.4 APIs to learn about the state of librelp's TLS support. For obvious reasons, librelp 1.2.4 is now required. --------------------------------------------------------------------------- Version 7.6.1 [v7.6-stable] 2014-03-13 - added "action.reportSuspension" action parameter This now permits to control handling on a per-action basis rather to the previous "global setting only". - "action resumed" message now also specifies module type which makes troubleshooting a bit easier. Note that we cannot output all the config details (like destination etc) as this would require much more elaborate code changes, which we at least do not like to do in the stable version. - better and more consistent action naming, action queues now always contain the word "queue" after the action name - add support for "tls-less" librelp we now require librelp 1.2.3, as we need the new error code definition See also: https://github.com/rsyslog/librelp/issues/1 - build system improvements * autoconf subdir option * support for newer json-c packages Thanks to Michael Biebl for the patches. - imjournal enhancements: * log entries with empty message field are no longer ignored * invalid facility and severity values are replaced by defaults * new config parameters to set default facility and severity Thanks to Tomas Heinrich for implementing this - bugfix: ompipe did resume itself even when it was still in error See: https://github.com/rsyslog/rsyslog/issues/35 Thanks to github user schplat for reporting - bugfix: "action xxx suspended" did report incorrect error code - bugfix: ommongodb's template parameter was mandatory but should have been optional Thanks to Alain for the analysis and the patch. - bugfix: only partial doc was put into distribution tarball Thanks to Michael Biebl for alerting us. see also: https://github.com/rsyslog/rsyslog/issues/31 - bugfix: async ruleset did process already-deleted messages Thanks to John Novotny for the patch. --------------------------------------------------------------------------- Version 7.6.0 [v7.6-stable] 2014-02-12 This starts a new stable branch based on 7.5.8 plus the following changes: - bugfix: imuxsock input parameters were not accepted due to copy&paste error. Thanks to Andy Goldstein for the fix. - added ProcessInternalMessages global system parameter This permits to inject rsyslog status messages into *another* main syslogd or the journal. - new dependency: liblogging-stdlog (for submitting to external logger) - bugfix: json templates are improperly created Strings miss the terminating NUL character, which obviously can lead to all sorts of problems. See also: https://github.com/rsyslog/rsyslog/issues/27 Thanks to Alain for the analysis and the patch. - ompgsql bugfix: improper handling of auto-backgrounding mode If rsyslog was set to auto-background itself (default code behaviour, but many distros now turn it off for good reason), ompgsql could not properly connect. This could even lead to a segfault. The core reason was that a PG session handle was kept open over a fork, something that is explicitely forbidden in the PG API. Thanks to Alain for the analysis and the patch. --------------------------------------------------------------------------- Version 7.5.8 [v7-release candidate] 2014-01-09 - add exec_template() RainerScript function - add debug.onShutdown and debug.logFile global parameters These enebale the new "debug on shutdown" mode, which can be used to track hard to find problems that occur during system shutdown. - Add directives for numerically specifying GIDs/UIDs The already present directives (FileOwner, FileGroup, DirOwner, DirGroup) translate names to numerical IDs, which depends on the user information being available during rsyslog's startup. This can fail if the information is obtained over a network or from a service such as SSSD. The new directives provide a way to specify the numerical IDs directly and bypass the lookup. Thanks to Tomas Heinrich for the patch. - actions now report if they suspend and resume themselves this is by default on and controllable by the action.reportSuspension global parameter - bugfix: omelasticsearch fail.es stats counter was improperly maintained - bugfix: mmrfc5424addhmac: "key" parameter was not properly processed - add new impstats action counters: * suspended * suspended.duration * resumed --------------------------------------------------------------------------- Version 7.5.7 [v7-devel] 2013-11-25 - queue defaults have changed * high water mark is now dynamically 90% of queue size * low water makr is now dynamically 70% of queue size * queue.discardMark is now dynamically 98% of queue size * queue.workerThreadMinimumMessage set to queue.size / num workers For queues with very low queue.maxSize (< 100), "emergency" defaults will be used. - worker thread pool handling has been improved Among others, permits pool to actually shrink (was quite hard with previous implementation. This will also improve performance and/or lower system overhead on busy systems. Thanks to Pavel Levshin for the enhancement. - bugfix: mmpstrucdata generated inaccessible properties - bugfix: RainerScript optimizer did not optimize PRI filters things like "if $syslogfacility-text == "local3"" were not converted to PRIFILT. This was a regression introduced in 7.5.6. - bugfix: legacy directive $ActionQueueWorkerThreads was not honored - bugfix: segfault on startup when certain script constructs are used e.g. "if not $msg ..." - bugfix: ommysql lost configfile/section parameters after first close This means that when a connection was broken, it was probably re-instantiated with different parameters than configured. - bugfix: regression in template processing with subtrees in templates Thanks to Pavel Levshin for the fix - bugfix: regular worker threads are not properly (re)started if DA mode is active. This occurs only under rare conditions, but definitely is a bug that needed to be addressed. It probably is present since version 4. Note that this patch has not been applied to v7.4-stable, as it is very unlikely to happen and the fix itself has some regression potential (the fix looks very solid, but it addresses a core component). Thanks to Pavel Levshin for the fix - now emit warning message if om with msg passing mode uses action queue These can modify the message, and this causes races. - bugfix: $SystemLogUseSysTimeStamp/$SystemLogUsePIDFromSystem did not work Thanks to Tomas Heinrich for the patch. --------------------------------------------------------------------------- Version 7.5.6 [devel] 2013-10-29 - impstats: add capability to bind to a ruleset - improved performance of RainerScript variable access by refactoring the whole body of variable handling code. This also solves some of the anomalies experienced in some versions of rsyslog. All variable types are now handled in unified code, including access via templates. - RainerScript: make use of 64 bit for numbers where available Thanks to Pavel Levshin for enhancement. - slight performance optimization if GCC is used We give branch prediction hints for the frequent RETiRet macro which is used for error handling. Some slight performance gain is to be expected from that. - removed global variable support The original idea was not well thought out and global variables, as implemented, worked far different from what anybody would expect. As such, we consider the current approach as an experiment that did not work out and opt to removing it, clearing the way for a better future solution. Note: global vars were introduced in 7.5.3 on Sept, 11th 2013. - new module mmsequence, primarily used for action load balancing Thanks to Pavel Levshin for contributing this module. - bugfix: unset statement always worked on message var, even if local var was given - imudp: support for binding to ruleset added - bugfix: segfault if variable was assigned to non-container subtree Thanks to Pavel Levshin for the fix - bugfix: imuxsock did not suport addtl sockets if syssock was disabled Thanks to Pavel Levshin for the fix - bugfix: running imupd on multiple threads lead to segfault if recvmmsg is available - bugfix: imudp when using recvmmsg could report wrong sender IP - bugfix: segfault if re_extract() function was used and no match found - bugfix: omelasticsearch did not compile on platforms without atomic instructions - bugfix: potential misadressing on startup if property-filter was used This could happen if the property name was longer than 127 chars, a case that would not happen in practice. - bugfix: invalid property filter was not properly disabled in ruleset Note: the cosmetic memory leak introduced with that patch in 7.4.5 is now also fixed. - imported bugfixes from 7.4.6 stable release --------------------------------------------------------------------------- Version 7.5.5 [devel] 2013-10-16 - imfile: permit to monitor an unlimited number of files - imptcp: add "defaultTZ" input parameter - imudp: support for multiple receiver threads added - imudp: add "dfltTZ" input config parameter - bugfix: memory leak in mmnormalize - bugfix: mmutf8fix did not properly handle invalid UTF-8 at END of message if the very last character sequence was too long, this was not detected Thanks to Risto Vaarandi for reporting this problem. - mmanon: removed the check for specific "terminator characters" after last octet. As it turned out, this didn't work in practice as there was an enormous set of potential terminator chars -- so removing them was the best thing to do. Note that this may change behaviour of existing installations. Yet, we still consider this an important bugfix, that should be applied to the stable branch. closes: http://bugzilla.adiscon.com/show_bug.cgi?id=477 Thanks to Muri Cicanor for initiating the discussion - now requires libestr 0.1.7 as early versions had a nasty bug in string comparisons - bugfix: mmanon did not detect all IP addresses in rewrite mode The problem occured if two IPs were close to each other and the first one was shrunk. closes: http://bugzilla.adiscon.com/show_bug.cgi?id=485 Thanks to micah-at-riseup.net for reporting this bug - bugfix: mmanon sometimes used invalid replacement char in simple mode depending on configuration sequence, the replacement character was set to 's' instead of the correct value. Most importantly, it was set to 's' if simple mode was selected and no replacement char set. closes: http://bugzilla.adiscon.com/show_bug.cgi?id=484 Thanks to micah-at-riseup.net for reporting this bug - bugfix: memory leak in mmnormalize - bugfix: array-based ==/!= comparisions lead to invalid results This was a regression introduced in 7.3.5 bei the PRI optimizer --------------------------------------------------------------------------- Version 7.5.4 [devel] 2013-10-07 - mmpstrucdata: new module to parse RFC5424 structured data into json message properties - change main/ruleset queue defaults to be more enterprise-like new defaults are queue.size 100,000 max workers 2, worker activation after 40,000 msgs are queued, batch size 256. These settings are much more useful for enterprises and will not hurt low-end systems that much. This is part of our re-focus on enterprise needs. - omfwd: new action parameter "maxErrorMessages" added - omfile: new module parameters to set action defaults added * dirCreateMode * fileCreateMode - mmutf8fix: new module to fix invalid UTF-8 sequences - imuxsock: handle unlimited number of additional listen sockets - doc: improve usability by linking to relevant web ressources The idea is to enable users to quickly find additional information, samples, HOWTOs and the like on the main site. At the same time, (very) slightly remove memory footprint when few listeners are monitored. - bugfix: omfwd parameter streamdrivermmode was not properly handled it was always overwritten by whatever value was set via the legacy directive $ActionSendStreamDriverMode - imtcp: add streamdriver.name module parameter permits overriding the system default stream driver (gtls, ptcp) - bugfix: build system: libgcrypt.h needed even if libgrcypt was disabled Thanks to Jonny Törnbom for reporting this problem - imported bugfixes from 7.4.4 --------------------------------------------------------------------------- Version 7.5.3 [devel] 2013-09-11 - imfile: support for escaping LF characters added embedded LF in syslog messages cause a lot of trouble. imfile now has the capability to escape them to "#012" (just like the regular control character escape option). This requires new-style input statements to be used. If legacy configuration statements are used, LF escaping is always turned off to preserve compatibility. NOTE: if input() statements were already used, there is a CHANGE OF BEHAVIOUR: starting with this version, escaping is enabled by default. So if you do not want it, you need to add escapeLF="off" to the input statement. Given the trouble LFs cause and the fact that the majority of installations still use legacy config, we considered this behaviour change acceptable and useful. see also: http://blog.gerhards.net/2013/09/imfile-multi-line-messages.html - add support for global and local variables - bugfix: queue file size was not correctly processed this could lead to using one queue file per message for sizes >2GiB Thanks to Tomas Heinrich for the patch. - add main_queue() configuration object to configure main message queue - bugfix: stream compression in imptcp caused timestamp to be corrupted - imudp: add ability to specify SO_RCVBUF size (rcvbufSize parameter) - imudp: use inputname for statistics, if configured - impstats: add process resource usage counters [via getrusage()] - impstats: add parameter "resetCounters" to report delta values possible for most, but not all, counters. See doc for details. - librelp 1.2.0 is now required - make use of new librelp generic error reporting facility This leads to more error messages being passed to the user and thus simplified troubleshooting. - bugfix: very small memory leak in imrelp more or less cosmetic, a single memory block was not freed, but this only happens immediately before termination (when the OS automatically frees all memory). Still an annoyance e.g. in valgrind. - fix compile problem in debug build - imported fixes from 7.4.4 --------------------------------------------------------------------------- Version 7.5.2 [devel] 2013-07-04 - librelp 1.1.4 is now required We use API extensions for better error reporting and higher performance. - omrelp: use transactional mode to make imrelp emit bulk sends - omrelp: add "windowSize" parameter to set custom RELP window size - bugfix: double-free in omelasticsearch closes: http://bugzilla.adiscon.com/show_bug.cgi?id=461 a security advisory for this bug is available at: http://www.lsexperts.de/advisories/lse-2013-07-03.txt CVE: CVE-2013-4758 PLEASE NOTE: This issue only existed if omelasticsearch was used in a non-default configuration, where the "errorfile" parameter was specified. Without that parameter set, the bug could not be triggered. Thanks to Markus Vervier and Marius Ionescu for providing a detailled bug report. Special thanks to Markus for coordinating his security advisory with us. - doc: fixed various typos closes: http://bugzilla.adiscon.com/show_bug.cgi?id=391 Thanks to Georgi Georgiev for the patch. --------------------------------------------------------------------------- Version 7.5.1 [devel] 2013-06-26 - librelp 1.1.3 is required - older versions can lead to a segfault - add mmfields, which among others supports easy parsing of CEF messages - omrelp: * new parameter "compression.prioritystring" to control encryption parameters used by GnuTLS - imrelp: * new parameter "compression.dhbits" to control the number of bits being used for Diffie-Hellman key generation * new parameter "compression.prioritystring" to control encryption parameters used by GnuTLS * support for impstats added * support for setting permitted peers (client authentication) added * bugfix: potential segfault at startup on invalid config parameters - imjournal: imported patches from 7.4.1 - omprog: add support for command line parameters - added experimental TCP stream compression (imptcp only, currently) - added BSD-specific syslog facilities * "console" * "bsd_security" - this is called "security" under BSD, but that name was unfortunately already taken by some standard facility. So I did the (hopefully) second-best thing and renamed it a little. - imported fixes from 7.4.2 (especially build problems on FreeBSD) - bugfix: imptcp did not properly initialize compression status variable could lead to segfault if stream:always compression mode was selected --------------------------------------------------------------------------- Version 7.5.0 [devel] 2013-06-11 - imrelp: implement "ruleset" module parameter - imrelp/omrelp: add TLS & compression (zip) support - omrelp: add "rebindInterval" parameter - add -S command line option to specify IP address to use for RELP client connections Thanks to Axel Rau for the patch. --------------------------------------------------------------------------- Version 7.4.11 [v7.4-stable] *never released* - imjournal enhancements: * log entries with empty message field are no longer ignored * invalid facility and severity values are replaced by defaults * new config parameters to set default facility and severity Thanks to Tomas Heinrich for implementing this --------------------------------------------------------------------------- Version 7.4.10 [v7.4-stable] 2014-02-12 - bugfix: json templates are improperly created Strings miss the terminating NUL character, which obviously can lead to all sorts of problems. See also: https://github.com/rsyslog/rsyslog/issues/27 Thanks to Alain for the analysis and the patch. - ompgsql bugfix: improper handling of auto-backgrounding mode If rsyslog was set to auto-background itself (default code behaviour, but many distros now turn it off for good reason), ompgsql could not properly connect. This could even lead to a segfault. The core reason was that a PG session handle was kept open over a fork, something that is explicitely forbidden in the PG API. Thanks to Alain for the analysis and the patch. --------------------------------------------------------------------------- Version 7.4.9 [v7.4-stable] 2014-01-22 - added ProcessInternalMessages global system parameter This permits to inject rsyslog status messages into *another* main syslogd or the journal. - new dependency: liblogging-stdlog (for submitting to external logger) - bugfix: imuxsock input parameters were not accepted due to copy&paste error. Thanks to Andy Goldstein for the fix. - bugfix: potential double-free in RainerScript equal comparison happens if the left-hand operand is JSON object and the right-hand operand is a non-string that does not convert to a number (for example, it can be another JSON object, probably the only case that could happen in practice). This is very unlikely to be triggered. - bugfix: some RainerScript Json(Variable)/string comparisons were wrong --------------------------------------------------------------------------- Version 7.4.8 [v7.4-stable] 2014-01-08 - rsgtutil provides better error messages on unfinished signature blocks - bugfix: guard against control characters in internal (error) messages Thanks to Ahto Truu for alerting us. - bugfix: immark did emit messages under kern.=info instead of syslog.=info Note that his can potentially break exisiting configurations that rely on immark sending as kern.=info. Unfortunately, we cannot leave this unfixed as we never should emit messages under the kern facility. --------------------------------------------------------------------------- Version 7.4.7 [v7.4-stable] 2013-12-10 - bugfix: limiting queue disk space did not work properly * queue.maxdiskspace actually initializes queue.maxfilesize * total size of queue files was not checked against queue.maxdiskspace for disk assisted queues. Thanks to Karol Jurak for the patch. - bugfix: linux kernel-like ratelimiter did not work properly with all inputs (for example, it did not work with imdup). The reason was that the PRI value was used, but that needed parsing of the message, which was done too late. - bugfix: disk queues created files in wrong working directory if the $WorkDirectory was changed multiple times, all queues only used the last value set. - bugfix: legacy directive $ActionQueueWorkerThreads was not honored - bugfix: segfault on startup when certain script constructs are used e.g. "if not $msg ..." - bugfix: imuxsock: UseSysTimeStamp config parameter did not work correctly Thanks to Tomas Heinrich for alerting us and provinding a solution suggestion. - bugfix: $SystemLogUseSysTimeStamp/$SystemLogUsePIDFromSystem did not work Thanks to Tomas Heinrich for the patch. - improved checking of queue config parameters on startup - bugfix: call to ruleset with async queue did not use the queue closes: http://bugzilla.adiscon.com/show_bug.cgi?id=443 - bugfix: if imtcp is loaded and no listeners are configured (which is uncommon), rsyslog crashes during shutdown. --------------------------------------------------------------------------- Version 7.4.6 [v7.4-stable] 2013-10-31 - bugfix: potential abort during HUP This could happen when one of imklog, imzmq3, imkmsg, impstats, imjournal, or imuxsock were under heavy load during a HUP. closes: http://bugzilla.adiscon.com/show_bug.cgi?id=489 Thanks to Guy Rozendorn for reporting the problem and Peval Levhshin for his analysis. - bugfix: imtcp flowControl parameter incorrectly defaulted to "off" This could cause message loss on systems under heavy load and was a change-of-behaviour to previous version. This is a regression most probably introduced in 5.9.0 (but did not try hard to find the exact point of its introduction). - now requires libestr 0.1.9 as earlier versions lead to problems with number handling in RainerScript - bugfix: memory leak in strlen() RainerScript function Thanks to Gregoire Seux for reportig this bug. closes: http://bugzilla.adiscon.com/show_bug.cgi?id=486 - bugfix: buffer overrun if re_extract function was called for submatch 50 Thanks to Pavel Levshin for reporting the problem and its location. - bugfix: memleak in re_extract() function Thanks to Pavel Levshin for reporting this problem. - bugfix: potential abort in RainerScript optimizer closes: http://bugzilla.adiscon.com/show_bug.cgi?id=488 Thanks to Thomas Doll for reporting the problem and Pavel Levshin for fixing it. - bugfix: memory leak in omhiredis Thanks to Pavel Levshin for the fix - bugfix: segfault if variable was assigned to non-container subtree Thanks to Pavel Levshin for the fix --------------------------------------------------------------------------- Version 7.4.5 [v7.4-stable] 2013-10-22 - mmanon: removed the check for specific "terminator characters" after last octet. As it turned out, this didn't work in practice as there was an enormous set of potential terminator chars -- so removing them was the best thing to do. Note that this may change behaviour of existing installations. Yet, we still consider this an important bugfix, that should be applied to the stable branch. closes: http://bugzilla.adiscon.com/show_bug.cgi?id=477 Thanks to Muri Cicanor for initiating the discussion - now requires libestr 0.1.8 as early versions had a nasty bug in string comparisons - omelasticsearch: add failed.httprequests stats counter - bugfix: invalid property filter was not properly disabled in ruleset Note that this bugfix introduces a very slight memory leak, which is cosmetic, as it just holds data until termination that is no longer needed. It is just the part of the config that was invalid. We will "fix" this "issue" in the devel version first, as the fix is a bit too intrusive to do without hard need in the stable version. - bugfix: segfault if re_extract() function was used and no match found - bugfix: potential misadressing on startup if property-filter was used This could happen if the property name was longer than 127 chars, a case that would not happen in practice. - bugfix: omelasticsearch: correct failed.http stats counter - bugfix: omelasticsearch: did not correctly initialize stats counters - bugfix: omelasticsearch: failed.es counter was only maintained in bulk mode This usually did not lead to any problems, because they are in static memory, which is initialized to zero by the OS when the plugin is loaded. But it may cause problems especially on systems that do not support atomic instructions - in this case the associated mutexes also did not get properly initialized. - bugfix: mmanon did not detect all IP addresses in rewrite mode The problem occured if two IPs were close to each other and the first one was shrunk. closes: http://bugzilla.adiscon.com/show_bug.cgi?id=485 Thanks to micah-at-riseup.net for reporting this bug - bugfix: mmanon sometimes used invalid replacement char in simple mode depending on configuration sequence, the replacement character was set to 's' instead of the correct value. Most importantly, it was set to 's' if simple mode was selected and no replacement char set. closes: http://bugzilla.adiscon.com/show_bug.cgi?id=484 Thanks to micah-at-riseup.net for reporting this bug - bugfix: memory leak in mmnormalize - bugfix: array-based ==/!= comparisions lead to invalid results This was a regression introduced in 7.3.5 bei the PRI optimizer - bugfix: omprog blocked signals to executed programs The made it impossible to send signals to programs executed via omprog. Thanks to Risto Vaarandi for the analysis and a patch. - bugfix: doc: imuxsock legacy param $SystemLogSocketParseTrusted was misspelled Thanks to David Lang for alerting us - bugfix: imfile "facility" input parameter improperly handled caused facility not to be set, and severity to be overwritten with the facility value. Thanks to forum user dmunny for reporting this bug. - bugfix: small memory leak in imfile when $ResetConfigVariables was used Thanks to Grégory Nuyttens for reporting this bug and providig a fix - bugfix: segfault on startup if TLS was used but no CA cert set - bugfix: segfault on startup if TCP TLS was used but no cert or key set - bugfix: some more build problems with newer json-c versions Thanks to Michael Biebl for mentioning the problem. - bugfix: build system: libgcrypt.h needed even if libgrcypt was disabled Thanks to Jonny Törnbom for reporting this problem --------------------------------------------------------------------------- Version 7.4.4 [v7.4-stable] 2013-09-03 - better error messages in GuardTime signature provider Thanks to Ahto Truu for providing the patch. - make rsyslog use the new json-c pkgconfig file if available Thanks to the Gentoo team for the patches. - bugfix: imfile parameter "persistStateInterval" was unusable due to a case typo in imfile; work-around was to use legacy config Thanks to Brandon Murphy for reporting this bug. - bugfix: TLV16 flag encoding error in signature files from GT provider This fixes a problem where the TLV16 flag was improperly encoded. Unfortunately, existing files already have the bug and may not properly be processed. The fix uses constants from the GuardTime API lib to prevent such problems in the future. Thanks to Ahto Truu for providing the patch. - bugfix: slightly malformed SMTP handling in ommail - bugfix: segfault in omprog if no template was provided (now dflt is used) - bugfix: segfault in ompipe if no template was provided (now dflt is used) - bugfix: segfault in omsnmp if no template was provided (now dflt is used) - bugfix: some omsnmp optional config params were flagged as mandatory - bugfix: segfault in omelasticsearch when resuming queued messages after restarting Elasticsearch closes: http://bugzilla.adiscon.com/show_bug.cgi?id=464 - bugfix: imtcp addtlframedelimiter could not be set to zero Thanks to Chris Norton for alerting us. - doc bugfix: remove no-longer existing omtemplate from developer doc was specifically mentioned as a sample for creating new plugins Thanks to Yannick Brosseau for alerting us of this problem. closes: http://bugzilla.adiscon.com/show_bug.cgi?id=473 --------------------------------------------------------------------------- Version 7.4.3 [v7.4-stable] 2013-07-18 - bugfix: queue file size was not correctly processed this could lead to using one queue file per message for sizes >2GiB Thanks to Tomas Heinrich for the patch. - bugfix: $QHOUR/$HHOUR were always "00" or "01" regression some time between v5 and here Thanks to forum user rjmcinty for reporting this bug - bugfix: testbench tool chkseq did improperly report invalid file This happened when permitted duplicate values existed in the very last lines, right before end-of-file. Thanks to Radu Gheorghe for reporting this bug. --------------------------------------------------------------------------- Version 7.4.3 [v7.4-stable] 2013-07-18 - bugfix: memory leak if disk queues were used and json data present - bugfix: CEE/json data was lost during disk queue operation - bugfix: potential segfault during startup on invalid config could happen if invalid actions were present, which could lead to improper handling in optimizer. - bugfix: 100% CPU utilization when DA queue became full - bugfix: omlibdbi did not properly close connection on some errors This happened to errors occuring in Begin/End Transaction entry points. - cosmetic bugfix: file name buffer was not freed on disk queue destruction This was an extremely small one-time per run memleak, so nothing of concern. However, it bugs under valgrind and similar memory debuggers. - fix build on FreeBSD Thanks to Christiano Rolim for the patch --------------------------------------------------------------------------- Version 7.4.2 [v7.4-stable] 2013-07-04 - bugfix: in RFC5425 TLS, multiple wildcards in auth could cause segfault - bugfix: RainerScript object required parameters were not properly checked - this clould result to segfaults on startup if parameters were missing. - bugfix: double-free in omelasticsearch closes: http://bugzilla.adiscon.com/show_bug.cgi?id=461 a security advisory for this bug is available at: http://www.lsexperts.de/advisories/lse-2013-07-03.txt CVE: CVE-2013-4758 PLEASE NOTE: This issue only existed if omelasticsearch was used in a non-default configuration, where the "errorfile" parameter was specified. Without that parameter set, the bug could not be triggered. Thanks to Markus Vervier and Marius Ionescu for providing a detailled bug report. Special thanks to Markus for coordinating his security advisory with us. - bugfix: omrelp potential segfault at startup on invalid config parameters - bugfix: small memory leak when $uptime property was used - bugfix: potential segfault on rsyslog termination in imudp closes: http://bugzilla.adiscon.com/show_bug.cgi?id=456 - bugfix: lmsig_gt abort on invalid configuration parameters closes: http://bugzilla.adiscon.com/show_bug.cgi?id=448 Thanks to Risto Laanoja for the patch. - imtcp: fix typo in "listner" parameter, which is "listener" Currently, both names are accepted. - solved build problems on FreeBSD closes: http://bugzilla.adiscon.com/show_bug.cgi?id=457 closes: http://bugzilla.adiscon.com/show_bug.cgi?id=458 Thanks to Christiano for reproting and suggesting patches - solved build problems on CENTOS5 --------------------------------------------------------------------------- Version 7.4.1 [v7.4-stable] 2013-06-17 - imjournal: add ratelimiting capability The original imjournal code did not support ratelimiting at all. We now have our own ratelimiter. This can mitigate against journal database corruption, when the journal re-sends old data. This is a current bug in systemd journal, but we won't outrule this to happen in the future again. So it is better to have a safeguard in place. By default, we permit 20,000 messages witin 10 minutes. This may be a bit restrictive, but given the risk potential it seems reasonable. Users requiring larger traffic flows can always adjust the value. - bugfix: potential loop in rate limiting if the message that tells about rate-limiting gets rate-limited itself, it will potentially create and endless loop - bugfix: potential segfault in imjournal if journal DB is corrupted - bugfix: prevent a segfault in imjournal if state file is not defined - bugfix imzmq3: potential segfault on startup if no problem happend at startup, everything went fine Thanks to Hongfei Cheng and Brian Knox for the patch --------------------------------------------------------------------------- Version 7.4.0 [v7.4-stable] 2013-06-06 This starts a new stable branch based on 7.3.15 plus the following changes: - add --enable-cached-man-pages ./configure option permits to build rsyslog on a system where rst2man is not installed. In that case, cached versions of the man pages are used (they were built during "make dist", so they should be current for the version in question. - doc bugfix: ReadMode wrong in imfile doc, two values were swapped Thanks to jokajak@gmail.com for mentioning this closes: http://bugzilla.adiscon.com/show_bug.cgi?id=450 - imjournal: no longer do periodic wakeup - bugfix: potential hang *in debug mode* on rsyslogd termination This ONLY affected rsyslogd if it were running with debug output enabled. - bugfix: $template statement with multiple spaces lead to invalid tpl name If multiple spaces were used in front of the template name, all but one of them became actually part of the template name. So $template a,"..." would be name " a", and as such "a" was not available, e.g. in *.* /var/log/file;a This is a legacy config problem. As it was unreported for many years, no backport of the fix to old versions will happen. This is a long-standing bug that was only recently reported by forum user mc-sim. Reference: http://kb.monitorware.com/post23448.html - 0mq fixes; credits to Hongfei Cheng and Brian Knox --------------------------------------------------------------------------- Version 7.3.15 [beta] 2013-05-15 - bugfix: problem in build system (especially when cross-compiling) Thanks to Tomas Heinrich and winfried_mb2@xmsnet.nl for the patch. closes: http://bugzilla.adiscon.com/show_bug.cgi?id=445 - bugfix: imjournal had problem with systemd journal API change - imjournal: now obtain and include PID - bugfix: .logsig files had tlv16 indicator bit at wrong offset - bugfix: omrelp legacy config parameters set a timeout of zero which lead the legacy config to be unusable. - bugfix: segfault on startup if a disk queue was configure without file name Now this triggers an error message and the queue is changed to linkedList type. - bugfix: invalid addressing in string class (recent regression) --------------------------------------------------------------------------- Version 7.3.14 [beta] 2013-05-06 - bugfix: some man pages were not properly installed either rscryutil or rsgtutil man was installed, but not both Thanks to Marius Tomaschewski for the patch. - bugfix: potential segfault on startup when builtin module was specified in module() statement. Thanks to Marius Tomaschewski for reporting the bug. - bugfix: segfault due to invalid dynafile cache handling Accidently, the old-style cache size parameter was used when the dynafile cache was created in a RainerScript action. If the old-style size was lower than the one actually set, this lead to misadressing when the size was overrun, and that could lead to all kinds of "interesting things", often in segfaults. closes: http://bugzilla.adiscon.com/show_bug.cgi?id=440 --------------------------------------------------------------------------- Version 7.3.13 [beta] 2013-04-29 - added omrabbitmq module (contributed, untested) Note: this is unsupported and as such was moved immediately into the beta version. Thanks to Vaclav Tomec for providing this module. - bugfix: build problem when --enable-encryption was not selected Thanks to Michael Biebl for fixing this. - doc bugfix: omfile parameter "VeryRobustZip" was documentas as "VeryReliableZip" closes: http://bugzilla.adiscon.com/show_bug.cgi?id=437 Thanks to Thomas Doll for reporting this. --------------------------------------------------------------------------- Version 7.3.12 [devel] 2013-04-25 - added doc for omelasticsearch Thanks to Radu Gheorghe for the doc contribution. - omelasticsearch: _id field support for bulk operations closes: http://bugzilla.adiscon.com/show_bug.cgi?id=392 Thanks to Jérôme Renard for the idea and patches. - max number of templates for plugin use has been increased to five - platform compatibility enhancement: solve compile issue with libgcrypt do not use GCRY_CIPHER_MODE_AESWRAP where not available - fix compile on Solaris Thanks to Martin Carpenter for the patch. - bugfix: off-by-one error in handling local FQDN name (regression) A remporary buffer was allocated one byte too small. Did only affect startup, not actual operations. Came up during routine tests, and can have no effect once the engine runs. Bug was introduced in 7.3.11. - bugfix: build problems on Solaris closes: http://bugzilla.adiscon.com/show_bug.cgi?id=436 - bugfix: block size limit was not properly honored - bugfix: potential segfault in guardtime signature provider it could segfault if an error was reported by the GuardTime API, because an invalid free could happen then --------------------------------------------------------------------------- Version 7.3.11 [devel] 2013-04-23 - added support for encrypting log files - omhiredis: added support for redis pipeline support Thanks to Brian Knox for the patch. - bugfix: $PreserveFQDN is not properly working Thanks to Louis Bouchard for the patch closes: http://bugzilla.adiscon.com/show_bug.cgi?id=426 - bugfix: imuxsock aborted due to problem in ratelimiting code Thanks to Tomas Heinrich for the patch. - bugfix: imuxsock aborted under some conditions regression from ratelimiting enhancements - this was a different one to the one Tomas Heinrich patched. - bugfix: timestamp problems in imkmsg --------------------------------------------------------------------------- Version 7.3.10 [devel] 2013-04-10 - added RainerScript re_extract() function - omrelp: added support for RainerScript-based configuration - omrelp: added ability to specify session timeout - templates now permit substring extraction relative to end-of-string - bugfix: failover/action suspend did not work correctly This was experienced if the retry action took more than one second to complete. For suspending, a cached timestamp was used, and if the retry took longer, that timestamp was already in the past. As a result, the action never was kept in suspended state, and as such no failover happened. The suspend functionalit now does no longer use the cached timestamp (should not have any performance implication, as action suspend occurs very infrequently). - bugfix: gnutls RFC5425 driver had some undersized buffers Thanks to Tomas Heinrich for the patch. - bugfix: nested if/prifilt conditions did not work properly closes: http://bugzilla.adiscon.com/show_bug.cgi?id=415 - bugfix: imuxsock aborted under some conditions regression from ratelimiting enhancements - bugfix: build problems on Solaris Thanks to Martin Carpenter for the patches. --------------------------------------------------------------------------- Version 7.3.9 [devel] 2013-03-27 - support for signing logs added - imudp: now supports user-selectable inputname - omlibdbi: now supports transaction interface if recent enough lbdbi is present - imuxsock: add ability to NOT create/delete sockets during startup and shutdown closes: http://bugzilla.adiscon.com/show_bug.cgi?id=259 - imfile: errors persisting state file are now reported closes: http://bugzilla.adiscon.com/show_bug.cgi?id=292 - imfile: now detects file change when rsyslog was inactive Previosly, this case could not be detected, so if a file was overwritten or rotated away while rsyslog was stopped, some data was missing. This is now detected and the new file being forwarded right from the beginning. closes: http://bugzilla.adiscon.com/show_bug.cgi?id=228 - updated systemd files to match current systemd source - bugfix: imudp scheduling parameters did affect main thread, not imudp closes: http://bugzilla.adiscon.com/show_bug.cgi?id=409 - bugfix: build problem on platforms without GLOB_NOMAGIC - bugfix: build problems on non-Linux platforms - bugfix: stdout/stderr were not closed on forking but were closed when running in the forground - this was just reversed of what it should be. This is a regression of a recent change. --------------------------------------------------------------------------- Version 7.3.8 [devel] 2013-03-18 - imrelp: now supports listening to IPv4/v6 only instead of always both build now requires librelp 1.0.2 closes: http://bugzilla.adiscon.com/show_bug.cgi?id=378 - bugfix: mmanon did not build on some platforms (e.g. Ubuntu) - bugfix: segfault in expression optimizer closes: http://bugzilla.adiscon.com/show_bug.cgi?id=423 - bugfix: imuxsock was missing SysSock.ParseTrusted module parameter To use that functionality, legacy rsyslog.conf syntax had to be used. Also, the doc was missing information on the "ParseTrusted" set of config directives. - bugfix: include files got included in the wrong order closes: http://bugzilla.adiscon.com/show_bug.cgi?id=411 This happens if an $IncludeConfig directive was done on multiple files (e.g. the distro default of $IncludeConfig /etc/rsyslog.d/*.conf). In that case, the order of include file processing is reversed, which could lead to all sorts of problems. Thanks to Nathan Stratton Treadway for his great analysis of the problem, which made bug fixing really easy. --------------------------------------------------------------------------- Version 7.3.7 [devel] 2013-03-12 - add support for anonymizing IPv4 addresses - add support for writing to the Linux Journal (omjournal) - imuxsock: add capability to ignore messages from ourselfes This helps prevent message routing loops, and is vital to have if omjournal is used together with traditional syslog. - field() function now supports a string as field delimiter - added ability to configure debug system via rsyslog.conf - bugfix: imuxsock segfault when system log socket was used - bugfix: mmjsonparse segfault if new-style config was used - bugfix: script == comparison did not work properly on JSON objects - bugfix: field() function did never return "***FIELD NOT FOUND***" instead it returned "***ERROR in field() FUNCTION***" in that case --------------------------------------------------------------------------- Version 7.3.6 [devel] 2013-01-28 - greatly improved speed of large-array [N]EQ RainerScript comparisons Thanks to David Lang for a related discussion that inspired the idea to do this with a much simpler (yet sufficient) approach than orignally planned for. - greatly improved speed of DNS cache for large cache sizes - general performance improvements - omfile: added stats counters for dynafile caches - omfile: improved async writing, finally enabled full async write also fixed a couple of smaller issues along that way - impstats: added ability to write stats records to local file and avoid going through the syslog log stream. syslog logging can now also be turned off (see doc for details). - bugfix: imklog issued wrong facility in error messages ...what could lead to problems in other parts of the code - fix compile problem in imklog - added capability to output thread-id-to-function debug info This is a useful debug aid, but nothing of concern for regular users. --------------------------------------------------------------------------- Version 7.3.5 [devel] 2012-12-19 - ommysql: addded batching/transaction support - enhanced script optimizer to optimize common PRI-based comparisons These constructs are especially used in SUSE default config files, but also by many users (as they are more readable than the equivalent PRI-based filter). - omudpspoof: add support for new config system - omudpspoof: add support for packets larger than 1472 bytes On Ethernet, they need to be transmitted in multiple fragments. While it is known that fragmentation can cause issues, it is the best choice to be made in that case. Also improved debug output. - bugfix: omudpspoof failed depending on the execution environment The v7 engine closes fds, and closed some of libnet's fds as well, what lead to problems (unfortunately, at least some libnet versions do not report a proper error state but still "success"...). The order of libnet calls has been adjusted to by in sync with what the core engine does. - bugfix: segfault on imuxsock startup if system log socket is used and no ratelimiting supported. Happens only during initial config read phase, once this is over, everything works stable. - bugfix: mmnormalize build problems - bugfix: mmnormalize could abort rsyslog if config parameter was in error - bugfix: no error message for invalid string template parameters rather a malformed template was generated, and error information emitted at runtime. However, this could be quite confusing. Note that with this "bugfix" user experience changes: formerly, rsyslog and the affected actions properly started up, but the actions did not produce proper data. Now, there are startup error messages and the actions are NOT executed (due to missing template due to template error). - bugfix[minor]: invalid error code when mmnormalize could not access rulebase - bugfix(kind of): script optimizer did not work for complex boolean expressions - doc bugfix: corrections and improvements in mmnormalize html doc page - bugfix: some message properties could be garbled due to race condition This happened only on very high volume systems, if the same message was being processed by two different actions. This was a regression caused by the new config processor, which did no longer properly enable msg locking in multithreaded cases. The bugfix is actually a refactoring of the msg locking code - we no longer do unlocked operations, as the use case for it has mostly gone away. It is potentially possible only at very low-end systems, and there the small additional overhead of doing the locking does not really hurt. Instead, the removal of that capability can actually slightly improve performance in common cases, as the code path is smaller and requires slightly less memory writes. That probably outperforms the extra locking overhead (which in the low-end case always happens in user space, without need for kernel support as we can always directly aquire the lock - there is no contention at all). - build system cleanup (thanks to Michael Biebl for this!) - bugfix: omelasticsearch did not properly compile on some platforms due to missing libmath. Thanks to Michael Biebl for the fix --------------------------------------------------------------------------- Version 7.3.4 [devel] 2012-11-23 - further (and rather drastically) improved disk queue performance we now save one third of the IO calls - imklog: added ParseKernelTimestamp parameter (import from 5.10.2) Thanks to Marius Tomaschewski for the patch. - imklog: added KeepKernelTimestamp parameter (import from 5.10.2) Thanks to Marius Tomaschewski for the patch. - bugfix: improper handling of backslash in string-type template()s - bugfix: leading quote (") in string-type template() lead to thight loop on startup - bugfix: no error msg on invalid field option in legacy/string template - bugfix: imklog mistakenly took kernel timestamp subseconds as nanoseconds ... actually, they are microseconds. So the fractional part of the timestamp was not properly formatted. (import from 5.10.2) Thanks to Marius Tomaschewski for the bug report and the patch idea. --------------------------------------------------------------------------- Version 7.3.3 [devel] 2012-11-07 - improved disk queue performance - bugfix: dynafile zip files could be corrupted This could happen if a dynafile was destructed before the first write. In practice, this could happen if few lines were written to a file and it then became evicted from the dynafile cache. This would probably look very random, because it depended on the timing in regard to message volume and dynafile cache size. --------------------------------------------------------------------------- Version 7.3.2 [devel] 2012-10-30 - mmnormalize: support for v6+ config interface added - mmjsonparse: support for v6+ config interface added --------------------------------------------------------------------------- Version 7.3.2 [devel] 2012-10-30 - totally reworked ratelimiting and "last message repeated n times" all over rsyslog code. Each of the supported inputs now supports linux-like ratelimiting (formerly only imuxsock did). Also, the "last message repeated n times" is now processed at the input side and no longer at the output side of rsyslog processing. This provides the basis for new future additions as well as usually more performance and a much simpler output part (which can be even further refactored). - imtcp: support for Linux-Type ratelimiting added - imptcp: support for Linux-Type ratelimiting added - imudp enhancements: * support for input batching added (performance improvement) * support for Linux-Type ratelimiting added - permited action-like statements (stop, call, ...) in action lists - bugfix: segfault on startup when modules using MSG_PASSING mode are used - omelasticsearch: support for writing data errors to local file added - omelasticsearch: fix check for bulk processing status response --------------------------------------------------------------------------- Version 7.3.1 [devel] 2012-10-19 - optimized template processing performance, especially for $NOW family of properties - change lumberjack cookie to "@cee:" from "@cee: " CEE originally specified the cookie with SP, whereas other lumberjack tools used it without space. In order to keep interop with lumberjack, we now use the cookie without space as well. I hope this can be changed in CEE as well when it is released at a later time. Thanks to Miloslav Trmač for pointing this out and a similiar v7 patch. - bugfix: imuxsock and imklog truncated head of received message This happened only under some circumstances. Thanks to Marius Tomaschewski, Florian Piekert and Milan Bartos for their help in solving this issue. - bugfix: imuxsock did not properly honor $LocalHostIPIF --------------------------------------------------------------------------- Version 7.3.0 [devel] 2012-10-09 - omlibdbi improvements, added * support for config load phases & module() parameters * support for default templates * driverdirectory is now cleanly a global parameter, but can no longer be specified as an action parameter. Note that in previous versions this parameter was ignored in all but the first action definition - improved omfile zip writer to increase compression This was achieved by somewhat reducing the robustness of the zip archive. This is controlled by the new action parameter "VeryReliableZip". ---------------------------------------------------------------------------- Version 7.2.8 [v7-stable] 2013-0?-?? - bugfix: potential segfault on startup when builtin module was specified in module() statement. Thanks to Marius Tomaschewski for reporting the bug. - bugfix: segfault due to invalid dynafile cache handling Accidently, the old-style cache size parameter was used when the dynafile cache was created in a RainerScript action. If the old-style size was lower than the one actually set, this lead to misadressing when the size was overrun, and that could lead to all kinds of "interesting things", often in segfaults. closes: http://bugzilla.adiscon.com/show_bug.cgi?id=440 ---------------------------------------------------------------------------- Version 7.2.7 [v7-stable] 2013-04-17 - rsyslogd startup information is now properly conveyed back to init when privileges are beging dropped Actually, we have moved termination of the parent in front of the priv drop. So it shall work now in all cases. See code comments in commit for more details. - If forking, the parent now waits for a maximum of 60 seconds for termination by the child - improved debugging support in forked (auto-backgrounding) mode The rsyslog debug log file is now continued to be written across the fork. - updated systemd files to match current systemd source - bugfix: failover/action suspend did not work correctly This was experienced if the retry action took more than one second to complete. For suspending, a cached timestamp was used, and if the retry took longer, that timestamp was already in the past. As a result, the action never was kept in suspended state, and as such no failover happened. The suspend functionalit now does no longer use the cached timestamp (should not have any performance implication, as action suspend occurs very infrequently). - bugfix: nested if/prifilt conditions did not work properly closes: http://bugzilla.adiscon.com/show_bug.cgi?id=415 - bugfix: script == comparison did not work properly on JSON objects [backport from 7.3 branch] - bugfix: imudp scheduling parameters did affect main thread, not imudp closes: http://bugzilla.adiscon.com/show_bug.cgi?id=409 - bugfix: imuxsock rate-limiting could not be configured via legacy conf Rate-limiting for the system socket could not be configured via legacy configuration directives. However, the new-style RainerScript config options worked. Thanks to Milan Bartos for the patch. closes: http://bugzilla.adiscon.com/show_bug.cgi?id=390 - bugfix: using group resolution could lead to endless loop Thanks to Tomas Heinrich for the patch. closes: http://bugzilla.adiscon.com/show_bug.cgi?id=310 - bugfix: $mmnormalizeuseramsg parameter was specified with wrong type Thank to Renzhong Zhang for alerting us of the problem. closes: http://bugzilla.adiscon.com/show_bug.cgi?id=420 - bugfix: RainerScript getenv() function caused segfault when var was not found. Thanks to Philippe Muller for the patch. - bugfix: several issues in imkmsg see bug tracker: http://bugzilla.adiscon.com/show_bug.cgi?id=421#c8 - bugfix: imuxsock was missing SysSock.ParseTrusted module parameter To use that functionality, legacy rsyslog.conf syntax had to be used. Also, the doc was missing information on the "ParseTrusted" set of config directives. - bugfix: parameter action.execOnlyWhenPreviousIsSuspended was accidently of integer-type. For obvious reasons, it needs to be boolean. Note that this change can break existing configurations if they circumvented the problem by using 0/1 values. - doc bugfix: rsyslog.conf man page had invalid file format info closes: http://bugzilla.adiscon.com/show_bug.cgi?id=418 ---------------------------------------------------------------------------- Version 7.2.6 [v7-stable] 2013-03-05 - slightly improved config parser error messages when invalid escapes happen - bugfix: include files got included in the wrong order closes: http://bugzilla.adiscon.com/show_bug.cgi?id=411 This happens if an $IncludeConfig directive was done on multiple files (e.g. the distro default of $IncludeConfig /etc/rsyslog.d/*.conf). In that case, the order of include file processing is reversed, which could lead to all sorts of problems. Thanks to Nathan Stratton Treadway for his great analysis of the problem, which made bug fixing really easy. - bugfix: omelasticsearch failed when authentication data was provided ... at least in most cases it emitted an error message: "snprintf failed when trying to build auth string" Thanks to Joerg Heinemann for alerting us. closes: http://bugzilla.adiscon.com/show_bug.cgi?id=404 - bugfix: some property-based filter were incorrectly parsed This usually lead to a syntax error on startup and rsyslogd not actually starting up. The problem was the regex, which did not care for double quote characters to follow in the action part - unfortunately something that can frequently happen with v6+ format. An example: :programname, isequal, "as" {action(type="omfile" ...) } Here, the part :programname, isequal, "as" {action(type="omfile" was treated as the property filter, and the rest as action part. Obviously, this did not work out. Unfortunately, such situations usually resulted in very hard to understand error messages. ---------------------------------------------------------------------------- Version 7.2.5 [v7-stable] 2013-01-08 - build system cleanup (thanks to Michael Biebl for this!) - bugfix: omelasticsearch did not properly compile on some platforms due to missing libmath. Thanks to Michael Biebl for the fix - bugfix: invalid DST handling under Solaris Thanks to Scott Severtson for the patch. - bugfix: on termination, actions were incorrectly called The problem was that incomplete fiter evaluation was done *during the shutdown phase*. This affected only the LAST batches being processed. No problem existed during the regular run. Could usually only happen on very busy systems, which were still busy during shutdown. - bugfix: very large memory consumption (and probably out of memory) when FromPos was specified in template, but ToPos not. Thanks to Radu Gheorghe for alerting us of this bug. - bugfix: timeval2syslogTime cause problems on some platforms due to invalid assumption on structure data types. closes: http://bugzilla.adiscon.com/show_bug.cgi?id=394 Thanks to David Hill for the patch [under ASL2.0 as per email conversation 2013-01-03]. - bugfix: compile errors in im3195 Thanks to Martin Körper for the patch - bugfix: doGetFileCreateMode() had invalid validity check ;) Thanks to Chandler Latour for the patch. - bugfix: mmjsonparse errornously returned action error when no CEE cookie was present. ---------------------------------------------------------------------------- Version 7.2.4 [v7-stable] 2012-12-07 - enhance: permit RFC3339 timestamp in local log socket messages Thanks to Sebastien Ponce for the patch. - imklog: added ParseKernelTimestamp parameter (import from 5.10.2) Thanks to Marius Tomaschewski for the patch. - fix missing functionality: ruleset(){} could not specify ruleset queue The "queue.xxx" parameter set was not supported, and legacy ruleset config statements did not work (by intention). The fix introduces the "queue.xxx" parameter set. It has some regression potential, but only for the new functionality. Note that using that interface it is possible to specify duplicate queue file names, which will cause trouble. This will be solved in v7.3, because there is a too-large regression potential for the v7.2 stable branch. - imklog: added KeepKernelTimestamp parameter (import from 5.10.2) Thanks to Marius Tomaschewski for the patch. - bugfix: imklog mistakenly took kernel timestamp subseconds as nanoseconds ... actually, they are microseconds. So the fractional part of the timestamp was not properly formatted. (import from 5.10.2) Thanks to Marius Tomaschewski for the bug report and the patch idea. - bugfix: supportoctetcountedframing parameter did not work in imptcp - bugfix: modules not (yet) supporting new conf format were not properly registered. This lead to a "module not found" error message instead of the to-be-expected "module does not support new style" error message. That invalid error message could be quite misleading and actually stop people from addressing the real problem (aka "go nuts" ;)) - bugfix: template "type" parameter is mandatory (but was not) - bugfix: some message properties could be garbled due to race condition This happened only on very high volume systems, if the same message was being processed by two different actions. This was a regression caused by the new config processor, which did no longer properly enable msg locking in multithreaded cases. The bugfix is actually a refactoring of the msg locking code - we no longer do unlocked operations, as the use case for it has mostly gone away. It is potentially possible only at very low-end systems, and there the small additional overhead of doing the locking does not really hurt. Instead, the removal of that capability can actually slightly improve performance in common cases, as the code path is smaller and requires slightly less memory writes. That probably outperforms the extra locking overhead (which in the low-end case always happens in user space, without need for kernel support as we can always directly aquire the lock - there is no contention at all). ---------------------------------------------------------------------------- Version 7.2.3 [v7-stable] 2012-10-21 - regression fix: rsyslogd terminated when wild-card $IncludeConfig did not find actual include files. For example, if this directive is present: $IncludeConfig /etc/rsyslog.d/*.conf and there are no *.conf files in /etc/rsyslog.d (but rsyslog.d exists), rsyslogd will emit an error message and terminate. Previous (and expected) behaviour is that an empty file set is no problem. HOWEVER, if the directory itself does not exist, this is flagged as an error and will load to termination (no startup). Unfortunately, this is often the case by default in many distros, so this actually prevents rsyslog startup. ---------------------------------------------------------------------------- Version 7.2.2 [v7-stable] 2012-10-16 - doc improvements - enabled to build without libuuid, at loss of uuid functionality this enables smoother builds on older systems that do not support libuuid. Loss of functionality should usually not matter too much as uuid support has only recently been added and is very seldom used. - bugfix: omfwd did not properly support "template" parameter - bugfix: potential segfault when re_match() function was used Thanks to oxpa for the patch. closes: http://bugzilla.adiscon.com/show_bug.cgi?id=371 - bugfix: potential abort of imtcp on rsyslogd shutdown - bugfix: imzmq3 segfault with PULL subscription Thanks to Martin Nilsson for the patch. - bugfix: improper handling of backslash in string-type template()s - bugfix: leading quote (") in string-type template() lead to thight loop on startup - bugfix: no error msg on invalid field option in legacy/string template - bugfix: potential segfault due to invalid param handling in comparisons This could happen in RainerScript comparisons (like contains); in some cases an unitialized variable was accessed, which could lead to an invalid free and in turn to a segfault. closes: http://bugzilla.adiscon.com/show_bug.cgi?id=372 Thanks to Georgi Georgiev for reporting this bug and his great help in solving it. - bugfix: no error msg on unreadable $IncludeConfig path - bugfix: $IncludeConfig did not correctly process directories closes: http://bugzilla.adiscon.com/show_bug.cgi?id=376 The testbench was also enhanced to check for these cases. Thanks to Georgi Georgiev for the bug report. - bugfix: make rsyslog compile on kfreebsd again closes: http://bugzilla.adiscon.com/show_bug.cgi?id=380 Thanks to Guillem Jover for the patch. - bugfix: garbled message if field name was used with jsonf property option The length for the field name was invalidly computed, resulting in either truncated field names or including extra random data. If the random data contained NULs, the rest of the message became unreadable. closes: http://bugzilla.adiscon.com/show_bug.cgi?id=374 - bugfix: potential segfault at startup with property-based filter If the property name was followed by a space before the comma, rsyslogd aborted on startup. Note that no segfault could happen if the initial startup went well (this was a problem with the config parser). closes: http://bugzilla.adiscon.com/show_bug.cgi?id=381 - bugfix: imfile discarded some file parts File lines that were incomplete (LF missing) *at the time imfile polled the file* were partially discarded. That part of the line that was read without the LF was discarded, and the rest of the line was submitted in the next polling cycle. This is now changed so that the partial content is saved until the complete line is read. Note that the patch affects only read mode 0. Thanks to Milan Bartos for providing the base idea for the solution. ---------------------------------------------------------------------------- Version 7.2.1 [v7-stable] 2012-10-29 - bugfix: ruleset()-object did only support a single statement - added -D rsyslogd option to enable config parser debug mode - improved syntax error messages by outputting the error token - the rsyslog core now suspeneds actions after 10 failures in a row This was former the case after 1,000 failures and could cause rsyslog to be spammed/ressources misused. See the v6 compatibility doc for more details. - ommongodb rate-limits error messages to prevent spamming the syslog closes (for v7.2): http://bugzilla.adiscon.com/show_bug.cgi?id=366 ---------------------------------------------------------------------------- Version 7.2.0 [v7-stable] 2012-10-22 This starts a new stable branch based on 7.1.12 plus the following changes: - bugfix: imuxsock did not properly honor $LocalHostIPIF - omruleset/omdiscard do no longer issue "deprecated" warings, as 7.1 grammar does not permit to use the replacements under all circumstances ---------------------------------------------------------------------------- Version 7.1.12 [beta] 2012-10-18 - minor updates to better support newer systemd developments Thanks to Michael Biebl for the patches. - build system cleanup Thanks to Michael Biebl for the patch series. - cleanup: removed remains of -c option (compatibility mode) both from code & doc and emitted warning message if still used closes: http://bugzilla.adiscon.com/show_bug.cgi?id=361 Thanks to Michael Biebl for reporting & suggestions - bugfix: imklog truncated head of received message This happened only under some circumstances. Thanks to Marius Tomaschewski and Florian Piekert for their help in solving this issue. ---------------------------------------------------------------------------- Version 7.1.11 [beta] 2012-10-16 - bugfix: imuxsock truncated head of received message This happened only under some circumstances. Thanks to Marius Tomaschewski, Florian Piekert and Milan Bartos for their help in solving this issue. - bugfix: do not crash if set statement is used with date field Thanks to Miloslav Trmač for the patch. - change lumberjack cookie to "@cee:" from "@cee: " CEE originally specified the cookie with SP, whereas other lumberjack tools used it without space. In order to keep interop with lumberjack, we now use the cookie without space as well. I hope this can be changed in CEE as well when it is released at a later time. Thanks to Miloslav Trmač for pointing this out and a similiar v7 patch. - added deprecated note to omruleset (plus clue to use "call") - added deprecated note to discard action (plus clue to use "stop") --------------------------------------------------------------------------- Version 7.1.10 [beta] 2012-10-11 - bugfix: m4 directory was not present in release tarball - bugfix: small memory leak with string-type templates - bugfix: small memory leak when template was specified in omfile - bugfix: some config processing warning messages were treated as errors - bugfix: small memory leak when processing action() statements - bugfix: unknown action() parameters were not reported --------------------------------------------------------------------------- Version 7.1.9 [beta] 2012-10-09 - bugfix: comments inside objects (e.g. action()) were not properly handled - bugfix: in (non)equal comparisons the position of arrays influenced result This behaviour is OK for "contains"-type of comparisons (which have quite different semantics), but not for == and <>, which shall be commutative. This has been fixed now, so there is no difference any longer if the constant string array is the left or right hand operand. We solved this via the optimizer, as it keeps the actual script execution code small. --------------------------------------------------------------------------- Version 7.1.8 [beta] 2012-10-02 - bugfix: ruleset(){} directive errornously changed default ruleset much like the $ruleset legacy conf statement. This potentially lead to statements being assigned to the wrong ruleset. - improved module doc - added "parser" parameter to ruleset(), so that parser chain can be configured - implemented "continue" RainerScript statement --------------------------------------------------------------------------- Version 7.1.7 [devel] 2012-10-01 - implemented RainerScript "call" statement - implemented RainerScript array-based string comparison operations - implemented imtcp "permittedPeers" module-global parameter - imudp: support for specifying multiple ports via array added --------------------------------------------------------------------------- Version 7.1.6 [devel] 2012-09-28 - implemented RainerScript input() statement, including support for it in major input plugins - implemented RainerScript ruleset() statement --------------------------------------------------------------------------- Version 7.1.5 [devel] 2012-09-25 - implemented RainerScript prifield() function - implemented RainerScript field() function - added new module imkmsg to process structured kernel log Thanks to Milan Bartos for contributing this module - implemented basic RainerScript optimizer, which will speed up script operations - bugfix: invalid free if function re_match() was incorrectly used if the config file parser detected that param 2 was not constant, some data fields were not initialized. The destructor did not care about that. This bug happened only if rsyslog startup was unclean. --------------------------------------------------------------------------- Version 7.1.4 [devel] 2012-09-19 - implemented ability for CEE-based properties to be stored in disk queues - implemented string concatenation in expressions via &-operator - implemented json subtree copy in variable assignment - implemented full JSON support for variable manipulation - introduced "subtree"-type templates - bugfix: omfile action did not respect "template" parameter ... and used default template in all cases - bugfix: MsgDup() did not copy CEE structure This function was called at various places, most importantly during "last messages repeated n times" processing and omruleset. If CEE(JSON) data was present, it was lost as part of the copy process. - bugfix: debug output indicated improper queue type --------------------------------------------------------------------------- Version 7.1.3 [devel] 2012-09-17 - introduced "set" and "unset" config statements - bugfix: missing support for escape sequences in RainerScript only \' was supported. Now the usual set is supported. Note that v5 used \x as escape where x was any character (e.g. "\n" meant "n" and NOT LF). This also means there is some incompatibility to v5 for well-know sequences. Better break it now than later. - bugfix: invalid property name in property-filter could cause abort if action chaining (& operator) was used http://bugzilla.adiscon.com/show_bug.cgi?id=355 Thanks to pilou@gmx.com for the bug report --------------------------------------------------------------------------- Version 7.1.2 [devel] 2012-09-12 - bugfix: messages were duplicated, sometimes massively regression from new code in 7.1.1 and reason for early release - bugfix: remove invalid socket option call from imuxsock Thanks to Cristian Ionescu-Idbohrn and Jonny Törnbom - bugfix: abort when invalid property name was configured in property-based filter - bugfix: multiple rulesets did no longer work correctly (7.1.1 regression) --------------------------------------------------------------------------- Version 7.1.1 [devel] 2012-09-11 - MAJOR NEW FEATURE: rulengine now fully supports nesting including if ... then ... else ... constructs. This is a big change and it obviously has a lot of bug potential. - BSD-style (filter) blocks are no longer supported see http://www.rsyslog.com/g/BSD for details and solution - imuxsock now stores trusted properties by default in the CEE root This was done in order to keep compatible with other implementations of the lumberjack schema Thanks to Miloslav Trmač for pointing to this. - bugfix: string-generating templates caused abort if CEE field could not be found --------------------------------------------------------------------------- Version 7.1.0 [devel] 2012-09-06 - added support for hierarchical properties (CEE/lumberjack) - added pure JSON output plugin parameter passing mode - ommongodb now supports templates - bugfix: imtcp could abort on exit due to invalid free() - imported bugfixes from 6.4.1 --------------------------------------------------------------------------- Version 6.6.1 [v6-stable] 2012-10-?? - bugfix: build problems on some platforms - bugfix: misaddressing of $mmnormalizeuserawmsg parameter On many platforms, this has no effect at all. At some, it may cause a segfault. The problem occurs only during config phase, no segfault happens when rsyslog has fully started. - fix API "glitch" in some plugins This did not affect users, but could have caused trouble in the future for developers. - bugfix: no error msg on invalid field option in legacy/string template - bugfix: no error msg on unreadable $IncludeConfig path - bugfix: $IncludeConfig did not correctly process directories closes: http://bugzilla.adiscon.com/show_bug.cgi?id=376 The testbench was also enhanced to check for these cases. Thanks to Georgi Georgiev for the bug report. - bugfix: spurios error messages from imuxsock about (non-error) EAGAIN Thanks to Marius Tomaschewski for the patch. - imklog: added $klogParseKernelTimestamp option When enabled, kernel message [timestamp] is converted for message time. Default is to use receive time as in 5.8.x and before, because the clock used to create the timestamp is not supposed to be as accurate as the monotonic clock (depends on hardware and kernel) resulting in differences between kernel and system messages which occurred at same time. Thanks to Marius Tomaschewski for the patch. - imklog: added $klogKeepKernelTimestamp option When enabled, the kernel [timestamp] remains at begin of each message, even it is used for the message time too. Thanks to Marius Tomaschewski for the patch. - bugfix: imklog mistakenly took kernel timestamp subseconds as nanoseconds ... actually, they are microseconds. So the fractional part of the timestamp was not properly formatted. Thanks to Marius Tomaschewski for the bug report and the patch idea. - bugfix: hostname set in rsyslog.conf was not picked up until HUP which could also mean "never" or "not for a very long time". Thanks to oxpa for providing analysis and a patch - bugfix: some message properties could be garbled due to race condition This happened only on very high volume systems, if the same message was being processed by two different actions. This was a regression caused by the new config processor, which did no longer properly enable msg locking in multithreaded cases. The bugfix is actually a refactoring of the msg locking code - we no longer do unlocked operations, as the use case for it has mostly gone away. It is potentially possible only at very low-end systems, and there the small additional overhead of doing the locking does not really hurt. Instead, the removal of that capability can actually slightly improve performance in common cases, as the code path is smaller and requires slightly less memory writes. That probably outperforms the extra locking overhead (which in the low-end case always happens in user space, without need for kernel support as we can always directly aquire the lock - there is no contention at all). - bugfix: invalid DST handling under Solaris Thanks to Scott Severtson for the patch. --------------------------------------------------------------------------- Version 6.6.0 [v6-stable] 2012-10-22 This starts a new stable branch, based on the 6.5.x series, plus: - bugfix: imuxsock did not properly honor $LocalHostIPIF --------------------------------------------------------------------------- Version 6.5.1 [beta] 2012-10-11 - added tool "logctl" to handle lumberjack logs in MongoDB - imfile ported to new v6 config interface - imfile now supports config parameter for maximum number of submits which is a fine-tuning parameter in regard to input baching - added pure JSON output plugin parameter passing mode - ommongodb now supports templates - bugfix: imtcp could abort on exit due to invalid free() - bugfix: remove invalid socket option call from imuxsock Thanks to Cristian Ionescu-Idbohrn and Jonny Törnbom - added pure JSON output plugin parameter passing mode - ommongodb now supports templates - bugfix: imtcp could abort on exit due to invalid free() - bugfix: missing support for escape sequences in RainerScript only \' was supported. Now the usual set is supported. Note that v5 used \x as escape where x was any character (e.g. "\n" meant "n" and NOT LF). This also means there is some incompatibility to v5 for well-know sequences. Better break it now than later. - bugfix: small memory leaks in template() statements these were one-time memory leaks during startup, so they did NOT grow during runtime - bugfix: config validation run did not always return correct return state - bugfix: config errors did not always cause statement to fail This could lead to startup with invalid parameters. --------------------------------------------------------------------------- Version 6.5.0 [devel] 2012-08-28 - imrelp now supports non-cancel thread termination (but now requires at least librelp 1.0.1) - implemented freeCnf() module interface This was actually not present in older versions, even though some modules already used it. The implementation was now done, and not in 6.3/6.4 because the resulting memory leak was ultra-slim and the new interface handling has some potential to seriously break things. Not the kind of thing you want to add in late beta state, if avoidable. - added --enable-debugless configure option for very high demanding envs This actually at compile time disables a lot of debug code, resulting in some speedup (but serious loss of debugging capabilities) - added new 0mq plugins (via czmq lib) Thanks to David Kelly for contributing these modules - bugfix: omhdfs did no longer compile - bugfix: SystemLogSocketAnnotate did not work correctly Thanks to Miloslav Trmač for the patch - $SystemLogParseTrusted config file option Thanks to Milan Bartos for the patch - added template config directive - added new uuid message property Thanks to Jérôme Renard for the idea and patches. Note: patches were released under ASL 2.0, see http://bugzilla.adiscon.com/show_bug.cgi?id=353 --------------------------------------------------------------------------- Version 6.4.3 [V6-STABLE/NEVER RELEASED] 2012-??-?? This version was never released as 6.6.0 came quickly enough. Note that all these patches here are present in 6.6.0. - cleanup: removed remains of -c option (compatibility mode) both from code & doc and emitted warning message if still used closes: http://bugzilla.adiscon.com/show_bug.cgi?id=361 Thanks to Michael Biebl for reporting & suggestions - bugfix: imuxsock and imklog truncated head of received message This happened only under some circumstances. Thanks to Marius Tomaschewski, Florian Piekert and Milan Bartos for their help in solving this issue. - change lumberjack cookie to "@cee:" from "@cee: " CEE originally specified the cookie with SP, whereas other lumberjack tools used it without space. In order to keep interop with lumberjack, we now use the cookie without space as well. I hope this can be changed in CEE as well when it is released at a later time. Thanks to Miloslav Trmač for pointing this out and a similiar v7 patch. - bugfix: comments inside objects (e.g. action()) were not properly handled - bugfix: sysklogd-emulating standard template was no longer present in v6 This was obviously lost during the transition to the new config format. Thanks to Milan Bartos for alerting us and a patch! - bugfix: some valid legacy PRI filters were flagged as errornous closes: http://bugzilla.adiscon.com/show_bug.cgi?id=358 This happend to filters of the style "local0,local1.*", where the multiple facilities were comma-separated. - bugfix: imuxsock did not properly honor $LocalHostIPIF --------------------------------------------------------------------------- Version 6.4.2 [V6-STABLE] 2012-09-20 - bugfix: potential abort, if action queue could not be properly started This most importantly could happen due to configuration errors. - bugfix: remove invalid socket option call from imuxsock Thanks to Cristian Ionescu-Idbohrn and Jonny Törnbom - bugfix: missing support for escape sequences in RainerScript only \' was supported. Now the usual set is supported. Note that v5 used \x as escape where x was any character (e.g. "\n" meant "n" and NOT LF). This also means there is some incompatibility to v5 for well-know sequences. Better break it now than later. - bugfix: config validation run did not always return correct return state --------------------------------------------------------------------------- Version 6.4.1 [V6-STABLE] 2012-09-06 - bugfix: multiple main queues with same queue file name were not detected This lead to queue file corruption. While the root cause is a config error, it is a bug that this important and hard to find config error was not detected by rsyslog. - bugfix: "jsonf" property replacer option did generate invalid JSON in JSON, we have "fieldname":"value", but the option emitted "fieldname"="value". Interestingly, this was accepted by a couple of sinks, most importantly elasticsearch. Now the correct format is emitted, which causes a remote chance that some things that relied on the wrong format will break. Thanks to Miloslav Trmač for the patch - change $!all-json did emit an empty (thus non-JSON) string if no libee data was present. It now emits {} and thus valid JSON. There is a small risk that this may break some things that relied on the previous inconsistency. Thanks to Miloslav Trmač for the patch - bugfix: omusrsmsg incorrect return state & config warning handling During config file processing, Omusrmsg often incorrectly returned a warning status, even when no warning was present (caused by uninitialized variable). Also, the core handled warning messages incorrectly, and treated them as errors. As a result, omusrmsg (most often) could not properly be loaded. Note that this only occurs with legacy config action syntax. This was a regression caused by an incorrect merge in to the 6.3.x codebase. Thanks to Stefano Mason for alerting us of this bug. - bugfix: Fixed TCP CheckConnection handling in omfwd.c. Interface needed to be changed in lower stream classes. Syslog TCP Sending is now resumed properly. Unfixed, that lead to non-detection of downstate of remote hosts. --------------------------------------------------------------------------- Version 6.4.0 [V6-STABLE] 2012-08-20 - THIS IS THE FIRST VERSION OF THE 6.4.x STABLE BRANCH It includes all enhancements made in 6.3.x plus what is written in the ChangeLog below. - omelasticsearch: support for parameters parent & dynparent added - bugfix: imtcp aborted when more than 2 connections were used. Incremented pthread stack size to 4MB for imtcp, imptcp and imttcp closes: http://bugzilla.adiscon.com/show_bug.cgi?id=342 - bugfix: imptcp aborted when $InputPTCPServerBindRuleset was used - bugfix: problem with cutting first 16 characters from message with bAnnotate Thanks to Milan Bartos for the patch. --------------------------------------------------------------------------- Version 6.3.12 [BETA] 2012-07-02 - support for elasticsearch via omelasticsearch added Note that this module has been tested quite well by a number of folks, and this is why we merge in new functionality in a late beta stage. Even if problems would exist, only users of omelasticsearch would experience them, making it a pretty safe addition. - bugfix: $ActionName was not properly honored Thanks to Abby Edwards for alerting us --------------------------------------------------------------------------- Version 6.3.11 [BETA] 2012-06-18 - bugfix: expression-based filters with AND/OR could segfault due to a problem with boolean shortcut operations. From the user's perspective, the segfault is almost non-deterministic (it occurs when a shortcut is used). Thanks to Lars Peterson for providing the initial bug report and his support in solving it. - bugfix: "last message repeated n times" message was missing hostname Thanks to Zdenek Salvet for finding this bug and to Bodik for reporting --------------------------------------------------------------------------- Version 6.3.10 [BETA] 2012-06-04 - bugfix: delayble source could block action queue, even if there was a disk queue associated with it. The root cause of this problem was that it makes no sense to delay messages once they arrive in the action queue - the "input" that is being held in that case is the main queue worker, what makes no sense. Thanks to Marcin for alerting us on this problem and providing instructions to reproduce it. - bugfix: invalid free in imptcp could lead to abort during startup - bugfix: if debug message could end up in log file when forking if rsyslog was set to auto-background (thus fork, the default) and debug mode to stdout was enabled, debug messages ended up in the first log file opened. Currently, stdout logging is completely disabled in forking mode (but writing to the debug log file is still possible). This is a change in behaviour, which is under review. If it causes problems to you, please let us know. Thanks to Tomas Heinrich for the patch. - bugfix: --enable-smcustbindcdr configure directive did not work closes: http://bugzilla.adiscon.com/show_bug.cgi?id=330 Thanks to Ultrabug for the patch. - bugfix: made rsyslog compile when libestr ist not installed in /usr Thanks to Miloslav Trmač for providing patches and suggestions --------------------------------------------------------------------------- Version 6.3.9 [BETA] 2012-05-22 - bugfix: imtcp could cause hang during reception this also applied to other users of core file tcpsrv.c, but imtcp was by far the most prominent and widely-used, the rest rather exotic (like imdiag) - added capability to specify substrings for field extraction mode - added the "jsonf" property replacer option (and fieldname) - bugfix: omudpspoof did not work correctly if no spoof hostname was configured - bugfix: property replacer option "json" could lead to content loss message was truncated if escaping was necessary - bugfix: assigned ruleset was lost when using disk queues This looked quite hard to diagnose for disk-assisted queues, as the pure memory part worked well, but ruleset info was lost for messages stored inside the disk queue. - bugfix/imuxsock: solving abort if hostname was not set; configured hostname was not used (both merge regressions) -bugfix/omfile: template action parameter was not accepted (and template name set to "??" if the parameter was used) Thanks to Brian Knox for alerting us on this bug. - bugfix: ommysql did not properly init/exit the mysql runtime library this could lead to segfaults. Triggering condition: multiple action instances using ommysql. Thanks to Tomas Heinrich for reporting this problem and providing an initial patch (which my solution is based on, I need to add more code to clean the mess up). - bugfix: rsyslog did not terminate when delayable inputs were blocked due to unvailable sources. Fixes: http://bugzilla.adiscon.com/show_bug.cgi?id=299 Thanks to Marcin M for bringing up this problem and Andre Lorbach for helping to reproduce and fix it. - added capability to specify substrings for field extraction mode - bugfix: disk queue was not persisted on shutdown, regression of fix to http://bugzilla.adiscon.com/show_bug.cgi?id=299 The new code also handles the case of shutdown of blocking light and full delayable sources somewhat smarter and permits, assuming sufficient timouts, to persist message up to the max queue capacity. Also some nits in debug instrumentation have been fixed. --------------------------------------------------------------------------- Version 6.3.8 [DEVEL] 2012-04-16 - added $PStatJSON directive to permit stats records in JSON format - added "date-unixtimestamp" property replacer option to format as a unix timestamp (seconds since epoch) - added "json" property replacer option to support JSON encoding on a per-property basis - added omhiredis (contributed module) - added mmjsonparse to support recognizing and parsing JSON enhanced syslog messages - upgraded more plugins to support the new v6 config format: - ommysql - omlibdbi - omsnmp - added configuration directives to customize queue light delay marks $MainMsgQueueLightDelayMark, $ActionQueueLightDelayMark; both specify number of messages starting at which a delay happens. - added message property parsesuccess to indicate if the last run higher-level parser could successfully parse the message or not (see property replacer html doc for details) - bugfix: abort during startup when rsyslog.conf v6+ format was used in a certain way - bugfix: property $!all-json made rsyslog abort if no normalized data was available - bugfix: memory leak in array passing output module mode - added configuration directives to customize queue light delay marks - permit size modifiers (k,m,g,...) in integer config parameters Thanks to Jo Rhett for the suggestion. - bugfix: hostname was not requeried on HUP Thanks to Per Jessen for reporting this bug and Marius Tomaschewski for his help in testing the fix. - bugfix: imklog invalidly computed facility and severity closes: http://bugzilla.adiscon.com/show_bug.cgi?id=313 - added configuration directive to disable octet-counted framing for imtcp, directive is $InputTCPServerSupportOctetCountedFraming for imptcp, directive is $InputPTCPServerSupportOctetCountedFraming - added capability to use a local interface IP address as fromhost-ip for locally originating messages. New directive $LocalHostIPIF --------------------------------------------------------------------------- Version 6.3.7 [DEVEL] 2012-02-02 - imported refactored v5.9.6 imklog linux driver, now combined with BSD driver - removed imtemplate/omtemplate template modules, as this was waste of time The actual input/output modules are better copy templates. Instead, the now-removed modules cost time for maintenance AND often caused confusion on what their role was. - added a couple of new stats objects - improved support for new v6 config system. The build-in output modules now all support the new config language - bugfix: facility local<x> was not correctly interpreted in legacy filters Was only accepted if it was the first PRI in a multi-filter PRI. Thanks to forum user Mark for bringing this to our attention. - bugfix: potential abort after reading invalid X.509 certificate closes: http://bugzilla.adiscon.com/show_bug.cgi?id=290 Thanks to Tomas Heinrich for the patch - bufgix: legacy parsing of some filters did not work correctly - bugfix: rsyslog aborted during startup if there is an error in loading an action and legacy configuration mode is used - bugfix: bsd klog driver did no longer compile - relicensed larger parts of the code under Apache (ASL) 2.0 --------------------------------------------------------------------------- Version 6.3.6 [DEVEL] 2011-09-19 - added $InputRELPServerBindRuleset directive to specify rulesets for RELP - bugfix: config parser did not support properties with dashes in them inside property-based filters. Thanks to Gerrit Seré for reporting this. --------------------------------------------------------------------------- Version 6.3.5 [DEVEL] (rgerhards/al), 2011-09-01 - bugfix/security: off-by-two bug in legacy syslog parser, CVE-2011-3200 - bugfix: mark message processing did not work correctly - imudp&imtcp now report error if no listener at all was defined Thanks to Marcin for suggesting this error message. - bugfix: potential misadressing in property replacer --------------------------------------------------------------------------- Version 6.3.4 [DEVEL] (rgerhards), 2011-08-02 - added support for action() config object * in rsyslog core engine * in omfile * in omusrmsg - bugfix: omusrmsg format usr1,usr2 was no longer supported - bugfix: misaddressing in config handler In theory, can cause segfault, in practice this is extremely unlikely Thanks to Marcin for alertig me. --------------------------------------------------------------------------- Version 6.3.3 [DEVEL] (rgerhards), 2011-07-13 - rsyslog.conf format: now parsed by RainerScript parser this provides the necessary base for future enhancements as well as some minor immediate ones. For details see: http://blog.gerhards.net/2011/07/rsyslog-633-config-format-improvements.html - performance of script-based filters notably increased - removed compatibility mode as we expect people have adjusted their confs by now - added support for the ":omfile:" syntax for actions --------------------------------------------------------------------------- Version 6.3.2 [DEVEL] (rgerhards), 2011-07-06 - added support for the ":omusrmsg:" syntax in configuring user messages - systemd support: set stdout/stderr to null - thx to Lennart for the patch - added support for obtaining timestamp for kernel message from message If the kernel time-stamps messages, time is now take from that timestamp instead of the system time when the message was read. This provides much better accuracy. Thanks to Lennart Poettering for suggesting this feature and his help during implementation. - added support for obtaining timestamp from system for imuxsock This permits to read the time a message was submitted to the system log socket. Most importantly, this is provided in microsecond resolution. So we are able to obtain high precision timestampis even for messages that were - as is usual - not formatted with them. This also simplifies things in regard to local time calculation in chroot environments. Many thanks to Lennart Poettering for suggesting this feature, providing some guidance on implementing it and coordinating getting the necessary support into the Linux kernel. - bugfix: timestamp was incorrectly calculated for timezones with minute offset closes: http://bugzilla.adiscon.com/show_bug.cgi?id=271 - bugfix: memory leak in imtcp & subsystems under some circumstances This leak is tied to error conditions which lead to incorrect cleanup of some data structures. --------------------------------------------------------------------------- Version 6.3.1 [DEVEL] (rgerhards), 2011-06-07 - added a first implementation of a DNS name cache this still has a couple of weaknesses, like no expiration of entries, suboptimal algorithms -- but it should perform much better than what we had previously. Implementation will be improved based on feedback during the next couple of releases --------------------------------------------------------------------------- Version 6.3.0 [DEVEL] (rgerhards), 2011-06-01 - introduced new config system http://blog.gerhards.net/2011/06/new-rsyslog-config-system-materializes.html --------------------------------------------------------------------------- Version 6.2.2 [v6-stable], 2012-06-13 - build system improvements and spec file templates Thanks to Abby Edwards for providing these enhancements - bugfix: disk queue was not persisted on shutdown, regression of fix to http://bugzilla.adiscon.com/show_bug.cgi?id=299 The new code also handles the case of shutdown of blocking light and full delayable sources somewhat smarter and permits, assuming sufficient timouts, to persist message up to the max queue capacity. Also some nits in debug instrumentation have been fixed. - bugfix: --enable-smcustbindcdr configure directive did not work closes: http://bugzilla.adiscon.com/show_bug.cgi?id=330 Thanks to Ultrabug for the patch. - add small delay (50ms) after sending shutdown message There seem to be cases where the shutdown message is otherwise not processed, not even on an idle system. Thanks to Marcin for bringing this problem up. - support for resolving huge groups closes: http://bugzilla.adiscon.com/show_bug.cgi?id=310 Thanks to Alec Warner for the patch - bugfix: potential hang due to mutex deadlock closes: http://bugzilla.adiscon.com/show_bug.cgi?id=316 Thanks to Andreas Piesk for reporting&analyzing this bug as well as providing patches and other help in resolving it. - bugfix: property PROCID empty instead of proper nilvalue if not present If it is not present, it must have the nilvalue "-" as of RFC5424 closes: http://bugzilla.adiscon.com/show_bug.cgi?id=332 Thanks to John N for reporting this issue. - bugfix: did not compile under solaris due to $uptime property code For the time being, $uptime is not supported on Solaris - bugfix: "last message repeated n times" message was missing hostname Thanks to Zdenek Salvet for finding this bug and to Bodik for reporting --------------------------------------------------------------------------- Version 6.2.1 [v6-stable], 2012-05-10 - change plugin config interface to be compatible with pre-v6.2 system The functionality was already removed (because it is superseeded by the v6.3+ config language), but code was still present. I have now removed those parts that affect interface. Full removal will happen in v6.3, in order to limit potential regressions. However, it was considered useful enough to do the interface change in v6-stable; this also eases merging branches! - re-licensed larger parts of the codebase under the Apache license 2.0 - bugfix: omprog made rsyslog abort on startup if not binary to execute was configured - bugfix: imklog invalidly computed facility and severity closes: http://bugzilla.adiscon.com/show_bug.cgi?id=313 - bugfix: stopped DA queue was never processed after a restart due to a regression from statistics module - bugfix: memory leak in array passing output module mode - bugfix: ommysql did not properly init/exit the mysql runtime library this could lead to segfaults. Triggering condition: multiple action instances using ommysql. Thanks to Tomas Heinrich for reporting this problem and providing an initial patch (which my solution is based on, I need to add more code to clean the mess up). - bugfix: rsyslog did not terminate when delayable inputs were blocked due to unvailable sources. Fixes: http://bugzilla.adiscon.com/show_bug.cgi?id=299 Thanks to Marcin M for bringing up this problem and Andre Lorbach for helping to reproduce and fix it. - bugfix/tcpflood: sending small test files did not work correctly --------------------------------------------------------------------------- Version 6.2.0 [v6-stable], 2012-01-09 - bugfix (kind of): removed numerical part from pri-text see v6 compatibility document for reasons - bugfix: race condition when extracting program name, APPNAME, structured data and PROCID (RFC5424 fields) could lead to invalid characters e.g. in dynamic file names or during forwarding (general malfunction of these fields in templates, mostly under heavy load) - bugfix: imuxsock did no longer ignore message-provided timestamp, if so configured (the *default*). Lead to no longer sub-second timestamps. closes: http://bugzilla.adiscon.com/show_bug.cgi?id=281 - bugfix: omfile returns fatal error code for things that go really wrong previously, RS_RET_RESUME was returned, which lead to a loop inside the rule engine as omfile could not really recover. - bugfix: potential abort after reading invalid X.509 certificate closes: http://bugzilla.adiscon.com/show_bug.cgi?id=290 Thanks to Tomas Heinrich for the patch - enhanced module loader to not rely on PATH_MAX - imuxsock: added capability to "annotate" messages with "trusted information", which contains some properties obtained from the system and as such sure to not be faked. This is inspired by the similiar idea introduced in systemd. --------------------------------------------------------------------------- Version 6.1.12 [BETA], 2011-09-01 - bugfix/security: off-by-two bug in legacy syslog parser, CVE-2011-3200 - bugfix: mark message processing did not work correctly - bugfix: potential misadressing in property replacer - bugfix: memcpy overflow can occur in allowed sender checkig if a name is resolved to IPv4-mapped-on-IPv6 address Found by Ismail Dönmez at suse - bugfix: The NUL-Byte for the syslogtag was not copied in MsgDup (msg.c) - bugfix: fixed incorrect state handling for Discard Action (transactions) Note: This caused all messages in a batch to be set to COMMITTED, even if they were discarded. --------------------------------------------------------------------------- Version 6.1.11 [BETA] (rgerhards), 2011-07-11 - systemd support: set stdout/stderr to null - thx to Lennart for the patch - added support for the ":omusrmsg:" syntax in configuring user messages - added support for the ":omfile:" syntax in configuring user messages --------------------------------------------------------------------------- Version 6.1.10 [BETA] (rgerhards), 2011-06-22 - bugfix: problems in failover action handling closes: http://bugzilla.adiscon.com/show_bug.cgi?id=270 closes: http://bugzilla.adiscon.com/show_bug.cgi?id=254 - bugfix: mutex was invalidly left unlocked during action processing At least one case where this can occur is during thread shutdown, which may be initiated by lower activity. In most cases, this is quite unlikely to happen. However, if it does, data structures may be corrupted which could lead to fatal failure and segfault. I detected this via a testbench test, not a user report. But I assume that some users may have had unreproducable aborts that were cause by this bug. --------------------------------------------------------------------------- Version 6.1.9 [BETA] (rgerhards), 2011-06-14 - bugfix: problems in failover action handling closes: http://bugzilla.adiscon.com/show_bug.cgi?id=270 closes: http://bugzilla.adiscon.com/show_bug.cgi?id=254 - bugfix: mutex was invalidly left unlocked during action processing At least one case where this can occur is during thread shutdown, which may be initiated by lower activity. In most cases, this is quite unlikely to happen. However, if it does, data structures may be corrupted which could lead to fatal failure and segfault. I detected this via a testbench test, not a user report. But I assume that some users may have had unreproducable aborts that were cause by this bug. - bugfix/improvement:$WorkDirectory now gracefully handles trailing slashes - bugfix: memory leak in imtcp & subsystems under some circumstances This leak is tied to error conditions which lead to incorrect cleanup of some data structures. [backport from v6.3] - bugfix: $ActionFileDefaultTemplate did not work closes: http://bugzilla.adiscon.com/show_bug.cgi?id=262 --------------------------------------------------------------------------- Version 6.1.8 [BETA] (rgerhards), 2011-05-20 - official new beta version (note that in a sense 6.1.7 was already beta, so we may release the first stable v6 earlier than usual) - new module mmsnmptrapd, a sample message modification module - import of minor bug fixes from v4 & v5 --------------------------------------------------------------------------- Version 6.1.7 [DEVEL] (rgerhards), 2011-04-15 - added log classification capabilities (via mmnormalize & tags) - speeded up tcp forwarding by reducing number of API calls this especially speeds up TLS processing - somewhat improved documentation index - bugfix: enhanced imudp config processing code disabled due to wrong merge (affected UDP realtime capabilities) - bugfix (kind of): memory leak with tcp reception epoll handler This was an extremely unlikely leak and, if it happend, quite small. Still it is better to handle this border case. - bugfix: IPv6-address could not be specified in omrelp this was due to improper parsing of ":" closes: http://bugzilla.adiscon.com/show_bug.cgi?id=250 - bugfix: do not open files with full privileges, if privs will be dropped This make the privilege drop code more bulletproof, but breaks Ubuntu's work-around for log files created by external programs with the wrong user and/or group. Note that it was long said that this "functionality" would break once we go for serious privilege drop code, so hopefully nobody still depends on it (and, if so, they lost...). - bugfix: pipes not opened in full priv mode when privs are to be dropped --------------------------------------------------------------------------- Version 6.1.6 [DEVEL] (rgerhards), 2011-03-14 - enhanced omhdfs to support batching mode. This permits to increase performance, as we now call the HDFS API with much larger message sizes and far more infrequently - improved testbench among others, life tests for ommysql (against a test database) have been added, valgrind-based testing enhanced, ... - bugfix: minor memory leak in omlibdbi (< 1k per instance and run) - bugfix: (regression) omhdfs did no longer compile - bugfix: omlibdbi did not use password from rsyslog.con closes: http://bugzilla.adiscon.com/show_bug.cgi?id=203 - systemd support somewhat improved (can now take over existing log sockt) - bugfix: discard action did not work under some circumstances fixes: http://bugzilla.adiscon.com/show_bug.cgi?id=217 - bugfix: file descriptor leak in gnutls netstream driver fixes: http://bugzilla.adiscon.com/show_bug.cgi?id=222 - fixed compile problem in imtemplate fixes: http://bugzilla.adiscon.com/show_bug.cgi?id=235 --------------------------------------------------------------------------- Version 6.1.5 [DEVEL] (rgerhards), 2011-03-04 - improved testbench - enhanced imtcp to use a pool of worker threads to process incoming messages. This enables higher processing rates, especially in the TLS case (where more CPU is needed for the crypto functions) - added support for TLS (in anon mode) to tcpflood - improved TLS error reporting - improved TLS startup (Diffie-Hellman bits do not need to be generated, as we do not support full anon key exchange -- we always need certs) - bugfix: fixed a memory leak and potential abort condition this could happen if multiple rulesets were used and some output batches contained messages belonging to more than one ruleset. fixes: http://bugzilla.adiscon.com/show_bug.cgi?id=226 fixes: http://bugzilla.adiscon.com/show_bug.cgi?id=218 - bugfix: memory leak when $RepeatedMsgReduction on was used bug tracker: http://bugzilla.adiscon.com/show_bug.cgi?id=225 - bugfix: potential abort condition when $RepeatedMsgReduction set to on as well as potentially in a number of other places where MsgDup() was used. This only happened when the imudp input module was used and it depended on name resolution not yet had taken place. In other words, this was a strange problem that could lead to hard to diagnose instability. So if you experience instability, chances are good that this fix will help. --------------------------------------------------------------------------- Version 6.1.4 [DEVEL] (rgerhards), 2011-02-18 - bugfix/omhdfs: directive $OMHDFSFileName rendered unusable due to a search and replace-induced bug ;) - bugfix: minor race condition in action.c - considered cosmetic This is considered cosmetic as multiple threads tried to write exactly the same value into the same memory location without sync. The method has been changed so this can no longer happen. - added pmsnare parser module (written by David Lang) - enhanced imfile to support non-cancel input termination - improved systemd socket activation thanks to Marius Tomaschewski - improved error reporting for $WorkDirectory non-existance and other detectable problems are now reported, and the work directory is NOT set in this case - bugfix: pmsnare causded abort under some conditions - bugfix: abort if imfile reads file line of more than 64KiB Thanks to Peter Eisentraut for reporting and analysing this problem. bug tracker: http://bugzilla.adiscon.com/show_bug.cgi?id=221 - bugfix: queue engine did not properly slow down inputs in FULL_DELAY mode when in disk-assisted mode. This especially affected imfile, which created unnecessarily queue files if a large set of input file data was to process. - bugfix: very long running actions could prevent shutdown under some circumstances. This has now been solved, at least for common situations. - bugfix: fixed compile problem due to empty structs this occured only on some platforms/compilers. thanks to Dražen Kačar for the fix --------------------------------------------------------------------------- Version 6.1.3 [DEVEL] (rgerhards), 2011-02-01 - experimental support for monogodb added - added $IMUDPSchedulingPolicy and $IMUDPSchedulingPriority config settings - added $LocalHostName config directive - improved tcpsrv performance by enabling multiple-entry epoll so far, we always pulled a single event from the epoll interface. Now 128, what should result in performance improvement (less API calls) on busy systems. Most importantly affects imtcp. - imptcp now supports non-cancel termination mode, a plus in stability - imptcp speedup: multiple worker threads can now be used to read data - new directive $InputIMPTcpHelperThreads added - bugfix: fixed build problems on some platforms namely those that have 32bit atomic operations but not 64 bit ones - bugfix: local hostname was pulled too-early, so that some config directives (namely FQDN settings) did not have any effect - enhanced tcpflood to support multiple sender threads this is required for some high-throughput scenarios (and necessary to run some performance tests, because otherwise the sender is too slow). - added some new custom parsers (snare, aix, some Cisco "specialities") thanks to David Lang --------------------------------------------------------------------------- Version 6.1.2 [DEVEL] (rgerhards), 2010-12-16 - added experimental support for log normalizaton (via liblognorm) support for normalizing log messages has been added in the form of mmnormalize. The core engine (property replacer, filter engine) has been enhanced to support properties from normalized events. Note: this is EXPERIMENTAL code. It is currently know that there are issues if the functionality is used with - disk-based queues - asynchronous action queues You can not use the new functionality together with these features. This limitation will be removed in later releases. However, we preferred to release early, so that one can experiment with the new feature set and accepted the price that this means the full set of functionality is not yet available. If not used together with these features, log normalizing should be pretty stable. - enhanced testing tool tcpflood now supports sending via UDP and the capability to run multiple iterations and generate statistics data records - bugfix: potential abort when output modules with different parameter passing modes were used in configured output modules --------------------------------------------------------------------------- Version 6.1.1 [DEVEL] (rgerhards), 2010-11-30 - bugfix(important): problem in TLS handling could cause rsyslog to loop in a tight loop, effectively disabling functionality and bearing the risk of unresponsiveness of the whole system. Bug tracker: http://bugzilla.adiscon.com/show_bug.cgi?id=194 - support for omhdfs officially added (import from 5.7.1) - merged imuxsock improvements from 5.7.1 (see there) - support for systemd officially added (import from 5.7.0) - bugfix: a couple of problems that imfile had on some platforms, namely Ubuntu (not their fault, but occured there) - bugfix: imfile utilizes 32 bit to track offset. Most importantly, this problem can not experienced on Fedora 64 bit OS (which has 64 bit long's!) - a number of other bugfixes from older versions imported --------------------------------------------------------------------------- Version 6.1.0 [DEVEL] (rgerhards), 2010-08-12 *********************************** NOTE ********************************** The v6 versions of rsyslog feature a greatly redesigned config system which, among others, supports scoping. However, the initial version does not contain the whole new system. Rather it will evolve. So it is expected that interfaces, even new ones, break during the initial 6.x.y releases. *********************************** NOTE ********************************** - added $Begin, $End and $ScriptScoping config scope statments (at this time for actions only). - added imptcp, a simplified, Linux-specific and potentielly fast syslog plain tcp input plugin (NOT supporting TLS!) [ported from v4] --------------------------------------------------------------------------- Version 5.10.2 [V5-STABLE], 201?-??-?? - bugfix: queue file size was not correctly processed this could lead to using one queue file per message for sizes >2GiB Thanks to Tomas Heinrich for the patch. - updated systemd files to match current systemd source - bugfix: spurios error messages from imuxsock about (non-error) EAGAIN Thanks to Marius Tomaschewski for the patch. - imklog: added $klogParseKernelTimestamp option When enabled, kernel message [timestamp] is converted for message time. Default is to use receive time as in 5.8.x and before, because the clock used to create the timestamp is not supposed to be as accurate as the monotonic clock (depends on hardware and kernel) resulting in differences between kernel and system messages which occurred at same time. Thanks to Marius Tomaschewski for the patch. - imklog: added $klogKeepKernelTimestamp option When enabled, the kernel [timestamp] remains at begin of each message, even it is used for the message time too. Thanks to Marius Tomaschewski for the patch. - bugfix: imklog mistakenly took kernel timestamp subseconds as nanoseconds ... actually, they are microseconds. So the fractional part of the timestamp was not properly formatted. Thanks to Marius Tomaschewski for the bug report and the patch idea. - imklog: added $klogKeepKernelTimestamp option When enabled, the kernel [timestamp] remains at begin of each message, even it is used for the message time too. Thanks to Marius Tomaschewski for the patch. - bugfix: imklog mistakenly took kernel timestamp subseconds as nanoseconds ... actually, they are microseconds. So the fractional part of the timestamp was not properly formatted. Thanks to Marius Tomaschewski for the bug report and the patch idea. - bugfix: invalid DST handling under Solaris Thanks to Scott Severtson for the patch. - bugfix: invalid decrement in pm5424 could lead to log truncation Thanks to Tomas Heinrich for the patch. - bugfix[kind of]: omudpspoof discarded messages >1472 bytes (MTU size) it now truncates these message, but ensures they are sent. Note that 7.3.5+ will switch to fragmented UDP messages instead (up to 64K) --------------------------------------------------------------------------- Version 5.10.1 [V5-STABLE], 2012-10-17 - bugfix: imuxsock and imklog truncated head of received message This happened only under some circumstances. Thanks to Marius Tomaschewski, Florian Piekert and Milan Bartos for their help in solving this issue. - enable DNS resolution in imrelp Thanks to Apollon Oikonomopoulos for the patch - bugfix: invalid property name in property-filter could cause abort if action chaining (& operator) was used http://bugzilla.adiscon.com/show_bug.cgi?id=355 Thanks to pilou@gmx.com for the bug report - bugfix: remove invalid socket option call from imuxsock Thanks to Cristian Ionescu-Idbohrn and Jonny Törnbom - bugfix: fixed wrong bufferlength for snprintf in tcpflood.c when using the -f (dynafiles) option. - fixed issues in build system (namely related to cust1 dummy plugin) --------------------------------------------------------------------------- Version 5.10.0 [V5-STABLE], 2012-08-23 NOTE: this is the new rsyslog v5-stable, incorporating all changes from the 5.9.x series. In addition to that, it contains the fixes and enhancements listed below in this entry. - bugfix: delayble source could block action queue, even if there was a disk queue associated with it. The root cause of this problem was that it makes no sense to delay messages once they arrive in the action queue - the "input" that is being held in that case is the main queue worker, what makes no sense. Thanks to Marcin for alerting us on this problem and providing instructions to reproduce it. - bugfix: disk queue was not persisted on shutdown, regression of fix to http://bugzilla.adiscon.com/show_bug.cgi?id=299 The new code also handles the case of shutdown of blocking light and full delayable sources somewhat smarter and permits, assuming sufficient timouts, to persist message up to the max queue capacity. Also some nits in debug instrumentation have been fixed. - add small delay (50ms) after sending shutdown message There seem to be cases where the shutdown message is otherwise not processed, not even on an idle system. Thanks to Marcin for bringing this problem up. - support for resolving huge groups closes: http://bugzilla.adiscon.com/show_bug.cgi?id=310 Thanks to Alec Warner for the patch - bugfix: potential hang due to mutex deadlock closes: http://bugzilla.adiscon.com/show_bug.cgi?id=316 Thanks to Andreas Piesk for reporting&analyzing this bug as well as providing patches and other help in resolving it. - bugfix: property PROCID empty instead of proper nilvalue if not present If it is not present, it must have the nilvalue "-" as of RFC5424 closes: http://bugzilla.adiscon.com/show_bug.cgi?id=332 Thanks to John N for reporting this issue. - bugfix: "last message repeated n times" message was missing hostname Thanks to Zdenek Salvet for finding this bug and to Bodik for reporting - bugfix: multiple main queues with same queue file name was not detected This lead to queue file corruption. While the root cause is a config error, it is a bug that this important and hard to find config error was not detected by rsyslog. --------------------------------------------------------------------------- Version 5.9.7 [V5-BETA], 2012-05-10 - added capability to specify substrings for field extraction mode - bugfix: ommysql did not properly init/exit the mysql runtime library this could lead to segfaults. Triggering condition: multiple action instances using ommysql. Thanks to Tomas Heinrich for reporting this problem and providing an initial patch (which my solution is based on, I need to add more code to clean the mess up). - bugfix: rsyslog did not terminate when delayable inputs were blocked due to unvailable sources. Fixes: http://bugzilla.adiscon.com/show_bug.cgi?id=299 Thanks to Marcin M for bringing up this problem and Andre Lorbach for helping to reproduce and fix it. - bugfix/tcpflood: sending small test files did not work correctly --------------------------------------------------------------------------- Version 5.9.6 [V5-BETA], 2012-04-12 - added configuration directives to customize queue light delay marks - permit size modifiers (k,m,g,...) in integer config parameters Thanks to Jo Rhett for the suggestion. - bugfix: hostname was not requeried on HUP Thanks to Per Jessen for reporting this bug and Marius Tomaschewski for his help in testing the fix. - bugfix: imklog invalidly computed facility and severity closes: http://bugzilla.adiscon.com/show_bug.cgi?id=313 - bugfix: imptcp input name could not be set config directive was accepted, but had no effect - added configuration directive to disable octet-counted framing for imtcp, directive is $InputTCPServerSupportOctetCountedFraming for imptcp, directive is $InputPTCPServerSupportOctetCountedFraming - added capability to use a local interface IP address as fromhost-ip for locally originating messages. New directive $LocalHostIPIF - added configuration directives to customize queue light delay marks $MainMsgQueueLightDelayMark, $ActionQueueLightDelayMark; both specify number of messages starting at which a delay happens. --------------------------------------------------------------------------- Version 5.9.5 [V5-DEVEL], 2012-01-27 - improved impstats subsystem, added many new counters - enhanced module loader to not rely on PATH_MAX - refactored imklog linux driver, now combined with BSD driver The Linux driver no longer supports outdated kernel symbol resolution, which was disabled by default for very long. Also overall cleanup, resulting in much smaller code. Linux and BSD are now covered by a single small driver. - $IMUXSockRateLimitInterval DEFAULT CHANGED, was 5, now 0 The new default turns off rate limiting. This was chosen as people experienced problems with rate-limiting activated by default. Now it needs an explicit opt-in by setting this parameter. Thanks to Chris Gaffney for suggesting to make it opt-in; thanks to many unnamed others who already had complained at the time Chris made the suggestion ;-) --------------------------------------------------------------------------- Version 5.9.4 [V5-DEVEL], 2011-11-29 - imuxsock: added capability to "annotate" messages with "trusted information", which contains some properties obtained from the system and as such sure to not be faked. This is inspired by the similiar idea introduced in systemd. - removed dependency on gcrypt for recently-enough GnuTLS see: http://bugzilla.adiscon.com/show_bug.cgi?id=289 - bugfix: imuxsock did no longer ignore message-provided timestamp, if so configured (the *default*). Lead to no longer sub-second timestamps. closes: http://bugzilla.adiscon.com/show_bug.cgi?id=281 - bugfix: omfile returns fatal error code for things that go really wrong previously, RS_RET_RESUME was returned, which lead to a loop inside the rule engine as omfile could not really recover. - bugfix: rsyslogd -v always said 64 atomics were not present thanks to mono_matsuko for the patch --------------------------------------------------------------------------- Version 5.9.3 [V5-DEVEL], 2011-09-01 - bugfix/security: off-by-two bug in legacy syslog parser, CVE-2011-3200 - bugfix: mark message processing did not work correctly - added capability to emit config error location info for warnings otherwise, omusrmsg's warning about new config format was not accompanied by problem location. - bugfix: potential misadressing in property replacer - bugfix: MSGID corruption in RFC5424 parser under some circumstances closes: http://bugzilla.adiscon.com/show_bug.cgi?id=275 - bugfix: The NUL-Byte for the syslogtag was not copied in MsgDup (msg.c) --------------------------------------------------------------------------- Version 5.9.2 [V5-DEVEL] (rgerhards), 2011-07-11 - systemd support: set stdout/stderr to null - thx to Lennart for the patch - added support for the ":omusrmsg:" syntax in configuring user messages - added support for the ":omfile:" syntax for actions --------------------------------------------------------------------------- Version 5.9.1 [V5-DEVEL] (rgerhards), 2011-06-30 - added support for obtaining timestamp for kernel message from message If the kernel time-stamps messages, time is now take from that timestamp instead of the system time when the message was read. This provides much better accuracy. Thanks to Lennart Poettering for suggesting this feature and his help during implementation. - added support for obtaining timestamp from system for imuxsock This permits to read the time a message was submitted to the system log socket. Most importantly, this is provided in microsecond resolution. So we are able to obtain high precision timestampis even for messages that were - as is usual - not formatted with them. This also simplifies things in regard to local time calculation in chroot environments. Many thanks to Lennart Poettering for suggesting this feature, providing some guidance on implementing it and coordinating getting the necessary support into the Linux kernel. - bugfix: timestamp was incorrectly calculated for timezones with minute offset closes: http://bugzilla.adiscon.com/show_bug.cgi?id=271 - bugfix: problems in failover action handling closes: http://bugzilla.adiscon.com/show_bug.cgi?id=270 closes: http://bugzilla.adiscon.com/show_bug.cgi?id=254 - bugfix: mutex was invalidly left unlocked during action processing At least one case where this can occur is during thread shutdown, which may be initiated by lower activity. In most cases, this is quite unlikely to happen. However, if it does, data structures may be corrupted which could lead to fatal failure and segfault. I detected this via a testbench test, not a user report. But I assume that some users may have had unreproducable aborts that were cause by this bug. - bugfix: memory leak in imtcp & subsystems under some circumstances This leak is tied to error conditions which lead to incorrect cleanup of some data structures. [backport from v6] - bugfix/improvement:$WorkDirectory now gracefully handles trailing slashes --------------------------------------------------------------------------- Version 5.9.0 [V5-DEVEL] (rgerhards), 2011-06-08 - imfile: added $InputFileMaxLinesAtOnce directive - enhanced imfile to support input batching - added capability for imtcp and imptcp to activate keep-alive packets at the socket layer. This has not been added to imttcp, as the latter is only an experimental module, and one which did not prove to be useful. reference: http://kb.monitorware.com/post20791.html - added support to control KEEPALIVE settings in imptcp this has not yet been added to imtcp, but could be done on request. - $ActionName is now also used for naming of queues in impstats as well as in the debug output - bugfix: do not open files with full privileges, if privs will be dropped This make the privilege drop code more bulletproof, but breaks Ubuntu's work-around for log files created by external programs with the wrong user and/or group. Note that it was long said that this "functionality" would break once we go for serious privilege drop code, so hopefully nobody still depends on it (and, if so, they lost...). - bugfix: pipes not opened in full priv mode when privs are to be dropped - this begins a new devel branch for v5 - better handling of queue i/o errors in disk queues. This is kind of a bugfix, but a very intrusive one, this it goes into the devel version first. Right now, "file not found" is handled and leads to the new emergency mode, in which disk action is stopped and the queue run in direct mode. An error message is emited if this happens. - added support for user-level PRI provided via systemd - added new config directive $InputTCPFlowControl to select if tcp received messages shall be flagged as light delayable or not. - enhanced omhdfs to support batching mode. This permits to increase performance, as we now call the HDFS API with much larger message sizes and far more infrequently - bugfix: failover did not work correctly if repeated msg reduction was on affected directive was: $ActionExecOnlyWhenPreviousIsSuspended on closes: http://bugzilla.adiscon.com/show_bug.cgi?id=236 --------------------------------------------------------------------------- Version 5.8.13 [V5-stable] 2012-08-22 - bugfix: DA queue could cause abort - bugfix: "last message repeated n times" message was missing hostname Thanks to Zdenek Salvet for finding this bug and to Bodik for reporting - bugfix "$PreserveFQDN on" was not honored in some modules Thanks to bodik for reporting this bug. - bugfix: randomized IP option header in omudpspoof caused problems closes: http://bugzilla.adiscon.com/show_bug.cgi?id=327 Thanks to Rick Brown for helping to test out the patch. - bugfix: potential abort if output plugin logged message during shutdown note that none of the rsyslog-provided plugins does this Thanks to bodik and Rohit Prasad for alerting us on this bug and analyzing it. fixes: http://bugzilla.adiscon.com/show_bug.cgi?id=347 - bugfix: multiple main queues with same queue file name was not detected This lead to queue file corruption. While the root cause is a config error, it is a bug that this important and hard to find config error was not detected by rsyslog. --------------------------------------------------------------------------- Version 5.8.12 [V5-stable] 2012-06-06 - add small delay (50ms) after sending shutdown message There seem to be cases where the shutdown message is otherwise not processed, not even on an idle system. Thanks to Marcin for bringing this problem up. - support for resolving huge groups closes: http://bugzilla.adiscon.com/show_bug.cgi?id=310 Thanks to Alec Warner for the patch - bugfix: delayble source could block action queue, even if there was a disk queue associated with it. The root cause of this problem was that it makes no sense to delay messages once they arrive in the action queue - the "input" that is being held in that case is the main queue worker, what makes no sense. Thanks to Marcin for alerting us on this problem and providing instructions to reproduce it. - bugfix: disk queue was not persisted on shutdown, regression of fix to http://bugzilla.adiscon.com/show_bug.cgi?id=299 The new code also handles the case of shutdown of blocking light and full delayable sources somewhat smarter and permits, assuming sufficient timouts, to persist message up to the max queue capacity. Also some nits in debug instrumentation have been fixed. - bugfix/omudpspoof: problems, including abort, happend when run on multiple threads. Root cause is that libnet is not thread-safe. omudpspoof now guards libnet calls with their own mutex. - bugfix: if debug message could end up in log file when forking if rsyslog was set to auto-background (thus fork, the default) and debug mode to stdout was enabled, debug messages ended up in the first log file opened. Currently, stdout logging is completely disabled in forking mode (but writing to the debug log file is still possible). This is a change in behaviour, which is under review. If it causes problems to you, please let us know. Thanks to Tomas Heinrich for the patch. - bugfix/tcpflood: sending small test files did not work correctly - bugfix: potential hang due to mutex deadlock closes: http://bugzilla.adiscon.com/show_bug.cgi?id=316 Thanks to Andreas Piesk for reporting&analyzing this bug as well as providing patches and other help in resolving it. - bugfix: property PROCID empty instead of proper nilvalue if not present If it is not present, it must have the nilvalue "-" as of RFC5424 closes: http://bugzilla.adiscon.com/show_bug.cgi?id=332 Thanks to John N for reporting this issue. --------------------------------------------------------------------------- Version 5.8.11 [V5-stable] 2012-05-03 - bugfix: ommysql did not properly init/exit the mysql runtime library this could lead to segfaults. Triggering condition: multiple action instances using ommysql. Thanks to Tomas Heinrich for reporting this problem and providing an initial patch (which my solution is based on, I need to add more code to clean the mess up). - bugfix: rsyslog did not terminate when delayable inputs were blocked due to unvailable sources. Fixes: http://bugzilla.adiscon.com/show_bug.cgi?id=299 Thanks to Marcin M for bringing up this problem and Andre Lorbach for helping to reproduce and fix it. - bugfix: active input in "light delay state" could block rsyslog termination, at least for prolonged period of time - bugfix: imptcp input name could not be set config directive was accepted, but had no effect - bugfix: assigned ruleset was lost when using disk queues This looked quite hard to diagnose for disk-assisted queues, as the pure memory part worked well, but ruleset info was lost for messages stored inside the disk queue. - bugfix: hostname was not requeried on HUP Thanks to Per Jessen for reporting this bug and Marius Tomaschewski for his help in testing the fix. - bugfix: inside queue.c, some thread cancel states were not correctly reset. While this is a bug, we assume it did have no practical effect because the reset as it was done was set to the state the code actually had at this point. But better fix this... --------------------------------------------------------------------------- Version 5.8.10 [V5-stable] 2012-04-05 - bugfix: segfault on startup if $actionqueuefilename was missing for disk queue config Thanks to Tomas Heinrich for the patch. - bugfix: segfault if disk-queue was started up with old queue file Thanks to Tomas Heinrich for the patch. - bugfix: memory leak in array passing output module mode --------------------------------------------------------------------------- Version 5.8.9 [V5-stable] 2012-03-15 - added tool to recover disk queue if .qi file is missing (recover_qi.pl) Thanks to Kaiwang Chen for contributing this tool - bugfix: stopped DA queue was never processed after a restart due to a regression from statistics module - added better doc for statsobj interface Thanks to Kaiwang Chen for his suggestions and analysis in regard to the stats subsystem. --------------------------------------------------------------------------- Version 5.8.8 [V5-stable] 2012-03-05 - added capability to use a local interface IP address as fromhost-ip for imuxsock imklog new config directives: $IMUXSockLocalIPIF, $klogLocalIPIF - added configuration directives to customize queue light delay marks $MainMsgQueueLightDelayMark, $ActionQueueLightDelayMark; both specify number of messages starting at which a delay happens. - bugfix: omprog made rsyslog abort on startup if not binary to execute was configured - bugfix: imklog invalidly computed facility and severity closes: http://bugzilla.adiscon.com/show_bug.cgi?id=313 --------------------------------------------------------------------------- Version 5.8.7 [V5-stable] 2012-01-17 - bugfix: instabilities when using RFC5424 header fields Thanks to Kaiwang Chen for the patch - bugfix: imuxsock did truncate part of received message if it did not contain a proper date. The truncation occured because we removed that part of the messages that was expected to be the date. closes: http://bugzilla.adiscon.com/show_bug.cgi?id=295 - bugfix: potential abort after reading invalid X.509 certificate closes: http://bugzilla.adiscon.com/show_bug.cgi?id=290 Thanks to Tomas Heinrich for the patch - bugfix: stats counter were not properly initialized on creation - FQDN hostname for multihomed host was not always set to the correct name if multiple aliases existed. Thanks to Tomas Heinreich for the patch. - re-licensed larger parts of the codebase under the Apache license 2.0 --------------------------------------------------------------------------- Version 5.8.6 [V5-stable] 2011-10-21 - bugfix: missing whitespace after property-based filter was not detected - bugfix: $OMFileFlushInterval period was doubled - now using correct value - bugfix: ActionQueue could malfunction due to index error Thanks to Vlad Grigorescu for the patch - bugfix: $ActionExecOnlyOnce interval did not work properly Thanks to Tomas Heinrich for the patch - bugfix: race condition when extracting program name, APPNAME, structured data and PROCID (RFC5424 fields) could lead to invalid characters e.g. in dynamic file names or during forwarding (general malfunction of these fields in templates, mostly under heavy load) - bugfix: imuxsock did no longer ignore message-provided timestamp, if so configured (the *default*). Lead to no longer sub-second timestamps. closes: http://bugzilla.adiscon.com/show_bug.cgi?id=281 - bugfix: omfile returns fatal error code for things that go really wrong previously, RS_RET_RESUME was returned, which lead to a loop inside the rule engine as omfile could not really recover. - bugfix: imfile did invalid system call under some circumstances when a file that was to be monitored did not exist BUT the state file actually existed. Mostly a cosmetic issue. Root cause was incomplete error checking in stream.c; so patch may affect other code areas. - bugfix: rsyslogd -v always said 64 atomics were not present thanks to mono_matsuko for the patch --------------------------------------------------------------------------- Version 5.8.5 [V5-stable] (rgerhards/al), 2011-09-01 - bugfix/security: off-by-two bug in legacy syslog parser, CVE-2011-3200 - bugfix: mark message processing did not work correctly - bugfix: potential hang condition during tag emulation - bugfix: too-early string termination during tag emulation - bugfix: The NUL-Byte for the syslogtag was not copied in MsgDup (msg.c) - bugfix: fixed incorrect state handling for Discard Action (transactions) Note: This caused all messages in a batch to be set to COMMITTED, even if they were discarded. --------------------------------------------------------------------------- Version 5.8.4 [V5-stable] (al), 2011-08-10 - bugfix: potential misadressing in property replacer - bugfix: memcpy overflow can occur in allowed sender checkig if a name is resolved to IPv4-mapped-on-IPv6 address Found by Ismail Dönmez at suse - bugfix: potential misadressing in property replacer - bugfix: MSGID corruption in RFC5424 parser under some circumstances closes: http://bugzilla.adiscon.com/show_bug.cgi?id=275 --------------------------------------------------------------------------- Version 5.8.3 [V5-stable] (rgerhards), 2011-07-11 - systemd support: set stdout/stderr to null - thx to Lennart for the patch - added support for the ":omusrmsg:" syntax in configuring user messages - added support for the ":omfile:" syntax for actions Note: previous outchannel syntax will generate a warning message. This may be surprising to some users, but it is quite urgent to alert them of the new syntax as v6 can no longer support the previous one. --------------------------------------------------------------------------- Version 5.8.2 [V5-stable] (rgerhards), 2011-06-21 - bugfix: problems in failover action handling closes: http://bugzilla.adiscon.com/show_bug.cgi?id=270 closes: http://bugzilla.adiscon.com/show_bug.cgi?id=254 - bugfix: mutex was invalidly left unlocked during action processing At least one case where this can occur is during thread shutdown, which may be initiated by lower activity. In most cases, this is quite unlikely to happen. However, if it does, data structures may be corrupted which could lead to fatal failure and segfault. I detected this via a testbench test, not a user report. But I assume that some users may have had unreproducable aborts that were cause by this bug. - bugfix: memory leak in imtcp & subsystems under some circumstances This leak is tied to error conditions which lead to incorrect cleanup of some data structures. [backport from v6] - bugfix/improvement:$WorkDirectory now gracefully handles trailing slashes --------------------------------------------------------------------------- Version 5.8.1 [V5-stable] (rgerhards), 2011-05-19 - bugfix: invalid processing in QUEUE_FULL condition If the the multi-submit interface was used and a QUEUE_FULL condition occured, the failed message was properly destructed. However, the rest of the input batch, if it existed, was not processed. So this lead to potential loss of messages and a memory leak. The potential loss of messages was IMHO minor, because they would have been dropped in most cases due to the queue remaining full, but very few lucky ones from the batch may have made it. Anyhow, this has now been changed so that the rest of the batch is properly tried to be enqueued and, if not possible, destructed. - new module mmsnmptrapd, a sample message modification module This can be useful to reformat snmptrapd messages and also serves as a sample for how to write message modification modules using the output module interface. Note that we introduced this new functionality directly into the stable release, as it does not modify the core and as such cannot have any side-effects if it is not used (and thus the risk is solely on users requiring that functionality). - bugfix: rate-limiting inside imuxsock did not work 100% correct reason was that a global config variable was invalidly accessed where a listener variable should have been used. Also performance-improved the case when rate limiting is turned off (this is a very unintrusive change, thus done directly to the stable version). - bugfix: $myhostname not available in RainerScript (and no error message) closes: http://bugzilla.adiscon.com/show_bug.cgi?id=233 - bugfix: memory and file descriptor leak in stream processing Leaks could occur under some circumstances if the file stream handler errored out during the open call. Among others, this could cause very big memory leaks if there were a problem with unreadable disk queue files. In regard to the memory leak, this closes: http://bugzilla.adiscon.com/show_bug.cgi?id=256 - bugfix: doc for impstats had wrong config statements also, config statements were named a bit inconsistent, resolved that problem by introducing an alias and only documenting the consistent statements Thanks to Marcin for bringing up this problem. - bugfix: IPv6-address could not be specified in omrelp this was due to improper parsing of ":" closes: http://bugzilla.adiscon.com/show_bug.cgi?id=250 - bugfix: TCP connection invalidly aborted when messages needed to be discarded (due to QUEUE_FULL or similar problem) - bugfix: $LocalHostName was not honored under all circumstances closes: http://bugzilla.adiscon.com/show_bug.cgi?id=258 - bugfix(minor): improper template function call in syslogd.c --------------------------------------------------------------------------- Version 5.8.0 [V5-stable] (rgerhards), 2011-04-12 This is the new v5-stable branch, importing all feature from the 5.7.x versions. To see what has changed in regard to the previous v5-stable, check the Changelog for 5.7.x below. - bugfix: race condition in deferred name resolution closes: http://bugzilla.adiscon.com/show_bug.cgi?id=238 Special thanks to Marcin for his persistence in helping to solve this bug. - bugfix: DA queue was never shutdown once it was started closes: http://bugzilla.adiscon.com/show_bug.cgi?id=241 --------------------------------------------------------------------------- Version 5.7.10 [V5-BETA] (rgerhards), 2011-03-29 - bugfix: ompgsql did not work properly with ANSI SQL strings closes: http://bugzilla.adiscon.com/show_bug.cgi?id=229 - bugfix: rsyslog did not build with --disable-regexp configure option closes: http://bugzilla.adiscon.com/show_bug.cgi?id=243 - bugfix: PRI was invalid on Solaris for message from local log socket - enhance: added $BOM system property to ease writing byte order masks - bugfix: RFC5424 parser confused by empty structured data closes: http://bugzilla.adiscon.com/show_bug.cgi?id=237 - bugfix: error return from strgen caused abort, now causes action to be ignored (just like a failed filter) - new sample plugin for a strgen to generate sql statement consumable by a database plugin - bugfix: strgen could not be used together with database outputs because the sql/stdsql option could not be specified. This has been solved by permitting the strgen to include the opton inside its name. closes: http://bugzilla.adiscon.com/show_bug.cgi?id=195 --------------------------------------------------------------------------- Version 5.7.9 [V5-BETA] (rgerhards), 2011-03-16 - improved testbench among others, life tests for ommysql (against a test database) have been added, valgrind-based testing enhanced, ... - enhance: fallback *at runtime* to epoll_create if epoll_create1 is not available. Thanks to Michael Biebl for analysis and patch! - bugfix: failover did not work correctly if repeated msg reduction was on closes: http://bugzilla.adiscon.com/show_bug.cgi?id=236 affected directive was: $ActionExecOnlyWhenPreviousIsSuspended on - bugfix: minor memory leak in omlibdbi (< 1k per instance and run) - bugfix: (regression) omhdfs did no longer compile - bugfix: omlibdbi did not use password from rsyslog.conf closes: http://bugzilla.adiscon.com/show_bug.cgi?id=203 --------------------------------------------------------------------------- Version 5.7.8 [V5-BETA] (rgerhards), 2011-03-09 - systemd support somewhat improved (can now take over existing log sockt) - bugfix: discard action did not work under some circumstances fixes: http://bugzilla.adiscon.com/show_bug.cgi?id=217 - bugfix: file descriptor leak in gnutls netstream driver fixes: http://bugzilla.adiscon.com/show_bug.cgi?id=222 --------------------------------------------------------------------------- Version 5.7.7 [V5-BETA] (rgerhards), 2011-03-02 - bugfix: potential abort condition when $RepeatedMsgReduction set to on as well as potentially in a number of other places where MsgDup() was used. This only happened when the imudp input module was used and it depended on name resolution not yet had taken place. In other words, this was a strange problem that could lead to hard to diagnose instability. So if you experience instability, chances are good that this fix will help. --------------------------------------------------------------------------- Version 5.7.6 [V5-BETA] (rgerhards), 2011-02-25 - bugfix: fixed a memory leak and potential abort condition this could happen if multiple rulesets were used and some output batches contained messages belonging to more than one ruleset. fixes: http://bugzilla.adiscon.com/show_bug.cgi?id=226 fixes: http://bugzilla.adiscon.com/show_bug.cgi?id=218 - bugfix: memory leak when $RepeatedMsgReduction on was used bug tracker: http://bugzilla.adiscon.com/show_bug.cgi?id=225 --------------------------------------------------------------------------- Version 5.7.5 [V5-BETA] (rgerhards), 2011-02-23 - enhance: imfile did not yet support multiple rulesets, now added we do this directly in the beta because a) it does not affect existing functionality and b) one may argue that this missing functionality is close to a bug. - improved testbench, added tests for imuxsock - bugfix: imuxsock did no longer sanitize received messages This was a regression from the imuxsock partial rewrite. Happened because the message is no longer run through the standard parsers. bug tracker: http://bugzilla.adiscon.com/show_bug.cgi?id=224 - bugfix: minor race condition in action.c - considered cosmetic This is considered cosmetic as multiple threads tried to write exactly the same value into the same memory location without sync. The method has been changed so this can no longer happen. --------------------------------------------------------------------------- Version 5.7.4 [V5-BETA] (rgerhards), 2011-02-17 - added pmsnare parser module (written by David Lang) - enhanced imfile to support non-cancel input termination - improved systemd socket activation thanks to Marius Tomaschewski - improved error reporting for $WorkDirectory non-existance and other detectable problems are now reported, and the work directory is NOT set in this case - bugfix: pmsnare causded abort under some conditions - bugfix: abort if imfile reads file line of more than 64KiB Thanks to Peter Eisentraut for reporting and analysing this problem. bug tracker: http://bugzilla.adiscon.com/show_bug.cgi?id=221 - bugfix: queue engine did not properly slow down inputs in FULL_DELAY mode when in disk-assisted mode. This especially affected imfile, which created unnecessarily queue files if a large set of input file data was to process. - bugfix: very long running actions could prevent shutdown under some circumstances. This has now been solved, at least for common situations. - bugfix: fixed compile problem due to empty structs this occured only on some platforms/compilers. thanks to Dražen Kačar for the fix --------------------------------------------------------------------------- Version 5.7.3 [V5-BETA] (rgerhards), 2011-02-07 - added support for processing multi-line messages in imfile - added $IMUDPSchedulingPolicy and $IMUDPSchedulingPriority config settings - added $LocalHostName config directive - bugfix: fixed build problems on some platforms namely those that have 32bit atomic operations but not 64 bit ones - bugfix: local hostname was pulled too-early, so that some config directives (namely FQDN settings) did not have any effect - bugfix: imfile did duplicate messages under some circumstances - added $OMMySQLConfigFile config directive - added $OMMySQLConfigSection config directive --------------------------------------------------------------------------- Version 5.7.2 [V5-DEVEL] (rgerhards), 2010-11-26 - bugfix(important): problem in TLS handling could cause rsyslog to loop in a tight loop, effectively disabling functionality and bearing the risk of unresponsiveness of the whole system. Bug tracker: http://bugzilla.adiscon.com/show_bug.cgi?id=194 - bugfix: imfile state file was not written when relative file name for it was specified - bugfix: compile failed on systems without epoll_create1() Thanks to David Hill for providing a fix. - bugfix: atomic increment for msg object may not work correct on all platforms. Thanks to Chris Metcalf for the patch - bugfix: replacements for atomic operations for non-int sized types had problems. At least one instance of that problem could potentially lead to abort (inside omfile). --------------------------------------------------------------------------- Version 5.7.1 [V5-DEVEL] (rgerhards), 2010-10-05 - support for Hadoop's HDFS added (via omhdfs) - imuxsock now optionally use SCM_CREDENTIALS to pull the pid from the log socket itself (thanks to Lennart Poettering for the suggesting this feature) - imuxsock now optionally uses per-process input rate limiting, guarding the user against processes spamming the system log (thanks to Lennart Poettering for suggesting this feature) - added new config statements * $InputUnixListenSocketUsePIDFromSystem * $SystemLogUsePIDFromSystem * $SystemLogRateLimitInterval * $SystemLogRateLimitBurst * $SystemLogRateLimitSeverity * $IMUxSockRateLimitInterval * $IMUxSockRateLimitBurst * $IMUxSockRateLimitSeverity - imuxsock now supports up to 50 different sockets for input - some code cleanup in imuxsock (consider this a release a major modification, especially if problems show up) - bugfix: /dev/log was unlinked even when passed in from systemd in which case it should be preserved as systemd owns it --------------------------------------------------------------------------- Version 5.7.0 [V5-DEVEL] (rgerhards), 2010-09-16 - added module impstat to emit periodic statistics on rsyslog counters - support for systemd officially added * acquire /dev/log socket optionally from systemd thanks to Lennart Poettering for this patch * sd-systemd API added as part of rsyslog runtime library --------------------------------------------------------------------------- Version 5.6.5 [V5-STABLE] (rgerhards), 2011-03-22 - bugfix: failover did not work correctly if repeated msg reduction was on affected directive was: $ActionExecOnlyWhenPreviousIsSuspended on closes: http://bugzilla.adiscon.com/show_bug.cgi?id=236 - bugfix: omlibdbi did not use password from rsyslog.con closes: http://bugzilla.adiscon.com/show_bug.cgi?id=203 - bugfix(kind of): tell users that config graph can currently not be generated closes: http://bugzilla.adiscon.com/show_bug.cgi?id=232 - bugfix: discard action did not work under some circumstances fixes: http://bugzilla.adiscon.com/show_bug.cgi?id=217 (backport from 5.7.8) --------------------------------------------------------------------------- Version 5.6.4 [V5-STABLE] (rgerhards), 2011-03-03 - bugfix: potential abort condition when $RepeatedMsgReduction set to on as well as potentially in a number of other places where MsgDup() was used. This only happened when the imudp input module was used and it depended on name resolution not yet had taken place. In other words, this was a strange problem that could lead to hard to diagnose instability. So if you experience instability, chances are good that this fix will help. - bugfix: fixed a memory leak and potential abort condition this could happen if multiple rulesets were used and some output batches contained messages belonging to more than one ruleset. fixes: http://bugzilla.adiscon.com/show_bug.cgi?id=226 fixes: http://bugzilla.adiscon.com/show_bug.cgi?id=218 - bugfix: memory leak when $RepeatedMsgReduction on was used bug tracker: http://bugzilla.adiscon.com/show_bug.cgi?id=225 --------------------------------------------------------------------------- Version 5.6.3 [V5-STABLE] (rgerhards), 2011-01-26 - bugfix: action processor released memory too early, resulting in potential issue in retry cases (but very unlikely due to another bug, which I also fixed -- only after the fix this problem here became actually visible). - bugfix: batch processing flagged invalid message as "bad" under some circumstances - bugfix: unitialized variable could cause issues under extreme conditions plus some minor nits. This was found after a clang static code analyzer analysis (great tool, and special thanks to Marcin for telling me about it!) - bugfix: batches which had actions in error were not properly retried in all cases - bugfix: imfile did duplicate messages under some circumstances - bugfix: testbench was not activated if no Java was present on system ... what actually was a left-over. Java is no longer required. --------------------------------------------------------------------------- Version 5.6.2 [V5-STABLE] (rgerhards), 2010-11-30 - bugfix: compile failed on systems without epoll_create1() Thanks to David Hill for providing a fix. - bugfix: atomic increment for msg object may not work correct on all platforms. Thanks to Chris Metcalf for the patch - bugfix: replacements for atomic operations for non-int sized types had problems. At least one instance of that problem could potentially lead to abort (inside omfile). - added the $InputFilePersistStateInterval config directive to imfile - changed imfile so that the state file is never deleted (makes imfile more robust in regard to fatal failures) - bugfix: a slightly more informative error message when a TCP connections is aborted --------------------------------------------------------------------------- Version 5.6.1 [V5-STABLE] (rgerhards), 2010-11-24 - bugfix(important): problem in TLS handling could cause rsyslog to loop in a tight loop, effectively disabling functionality and bearing the risk of unresponsiveness of the whole system. Bug tracker: http://bugzilla.adiscon.com/show_bug.cgi?id=194 - permitted imptcp to work on systems which support epoll(), but not epoll_create(). Bug: http://bugzilla.adiscon.com/show_bug.cgi?id=204 Thanks to Nicholas Brink for reporting this problem. - bugfix: testbench failed if imptcp was not enabled - bugfix: segfault when an *empty* template was used Bug: http://bugzilla.adiscon.com/show_bug.cgi?id=206 Thanks to David Hill for alerting us. - bugfix: compile failed with --enable-unlimited-select thanks varmojfekoj for the patch --------------------------------------------------------------------------- Version 5.6.0 [V5-STABLE] (rgerhards), 2010-10-19 This release brings all changes and enhancements of the 5.5.x series to the v5-stable branch. - bugfix: a couple of problems that imfile had on some platforms, namely Ubuntu (not their fault, but occured there) - bugfix: imfile utilizes 32 bit to track offset. Most importantly, this problem can not experienced on Fedora 64 bit OS (which has 64 bit long's!) --------------------------------------------------------------------------- Version 5.5.7 [V5-BETA] (rgerhards), 2010-08-09 - changed omudpspoof default spoof address to simplify typical use case thanks to David Lang for suggesting this - doc bugfix: pmlastmsg doc samples had errors - bugfix[minor]: pmrfc3164sd had invalid name (resided in rsyslog name space, what should not be the case for a contributed module) - added omuxsock, which permits to write message to local Unix sockets this is the counterpart to imuxsock, enabling fast local forwarding --------------------------------------------------------------------------- Version 5.5.6 [DEVEL] (rgerhards), 2010-07-21 - added parser modules * pmlastmsg, which supports the notoriously malformed "last message repeated n times" messages from some syslogd's (namely sysklogd) * pmrfc3164sd (contributed), supports RFC5424 structured data in RFC3164 messages [untested] - added new module type "string generator", used to speed up output processing. Expected speedup for (typical) rsyslog processing is roughly 5 to 6 percent compared to using string-based templates. They may also be used to do more complex formatting with custom C code, what provided greater flexibility and probably far higher speed, for example if using multiple regular expressions within a template. - added 4 string generators for * RSYSLOG_FileFormat * RSYSLOG_TraditionalFileFormat * RSYSLOG_ForwardFormat * RSYSLOG_TraditionalForwardFormat - bugfix: mutexes used to simulate atomic instructions were not destructed - bugfix: regression caused more locking action in msg.c than necessary - bugfix: "$ActionExecOnlyWhenPreviousIsSuspended on" was broken - bugfix: segfault on HUP when "HUPIsRestart" was set to "on" thanks varmojfekoj for the patch - bugfix: default for $OMFileFlushOnTXEnd was wrong ("off"). This, in default mode, caused buffered writing to be used, what means that it looked like no output were written or partial lines. Thanks to Michael Biebl for pointing out this bug. - bugfix: programname filter in ! configuration can not be reset Thanks to Kiss Gabor for the patch. --------------------------------------------------------------------------- Version 5.5.5 [DEVEL] (rgerhards), 2010-05-20 - added new cancel-reduced action thread termination method We now manage to cancel threads that block inside a retry loop to terminate without the need to cancel the thread. Avoiding cancellation helps keep the system complexity minimal and thus provides for better stability. This also solves some issues with improper shutdown when inside an action retry loop. --------------------------------------------------------------------------- Version 5.5.4 [DEVEL] (rgerhards), 2010-05-03 - This version offers full support for Solaris on Intel and Sparc - bugfix: problems with atomic operations emulation replaced atomic operation emulation with new code. The previous code seemed to have some issue and also limited concurrency severely. The whole atomic operation emulation has been rewritten. - bugfix: netstream ptcp support class was not correctly build on systems without epoll() support - bugfix: segfault on Solaris/Sparc --------------------------------------------------------------------------- Version 5.5.3 [DEVEL] (rgerhards), 2010-04-09 - added basic but functional support for Solaris - imported many bugfixes from 3.6.2/4.6.1 (see ChangeLog below!) - added new property replacer option "date-rfc3164-buggyday" primarily to ease migration from syslog-ng. See property replacer doc for details. - added capability to turn off standard LF delimiter in TCP server via new directive "$InputTCPServerDisableLFDelimiter on" - bugfix: failed to compile on systems without epoll support - bugfix: comment char ('#') in literal terminated script parsing and thus could not be used. but tracker: http://bugzilla.adiscon.com/show_bug.cgi?id=119 [merged in from v3.22.2] - imported patches from 4.6.0: * improved testbench to contain samples for totally malformed messages which miss parts of the message content * bugfix: some malformed messages could lead to a missing LF inside files or some other missing parts of the template content. * bugfix: if a message ended immediately with a hostname, the hostname was mistakenly interpreted as TAG, and localhost be used as hostname --------------------------------------------------------------------------- Version 5.5.2 [DEVEL] (rgerhards), 2010-02-05 - applied patches that make rsyslog compile under Apple OS X. Thanks to trey for providing these. - replaced data type "bool" by "sbool" because this created some portability issues. - added $Escape8BitCharactersOnReceive directive Thanks to David Lang for suggesting it. - worked around an issue where omfile failed to compile on 32 bit platforms under some circumstances (this smells like a gcc problem, but a simple solution was available). Thanks to Kenneth Marshall for some advice. - extended testbench --------------------------------------------------------------------------- Version 5.5.1 [DEVEL] (rgerhards), 2009-11-27 - introduced the ablity for netstream drivers to utilize an epoll interface This offers increased performance and removes the select() FDSET size limit from imtcp. Note that we fall back to select() if there is no epoll netstream drivers. So far, an epoll driver has only been implemented for plain tcp syslog, the rest will follow once the code proves well in practice AND there is demand. - re-implemented $EscapeControlCharacterTab config directive Based on Jonathan Bond-Caron's patch for v4. This now also includes some automatted tests. - bugfix: enabling GSSServer crashes rsyslog startup Thanks to Tomas Kubina for the patch [imgssapi] - bugfix (kind of): check if TCP connection is still alive if using TLS Thanks to Jonathan Bond-Caron for the patch. --------------------------------------------------------------------------- Version 5.5.0 [DEVEL] (rgerhards), 2009-11-18 - moved DNS resolution code out of imudp and into the backend processing Most importantly, DNS resolution now never happens if the resolved name is not required. Note that this applies to imudp - for the other inputs, DNS resolution almost comes for free, so we do not do it there. However, the new method has been implemented in a generic way and as such may also be used by other modules in the future. - added option to use unlimited-size select() calls Thanks to varmjofekoj for the patch This is not done in imudp, as it natively supports epoll(). - doc: improved description of what loadable modules can do --------------------------------------------------------------------------- Version 5.4.2 [v5-stable] (rgerhards), 2010-03-?? - bugfix(kind of): output plugin retry behaviour could cause engine to loop The rsyslog engine did not guard itself against output modules that do not properly convey back the tryResume() behaviour. This then leads to what looks like an endless loop. I consider this to be a bug of the engine not only because it should be hardened against plugin misbehaviour, but also because plugins may not be totally able to avoid this situation (depending on the type of and processing done by the plugin). - bugfix: testbench failed when not executed in UTC+1 timezone accidently, the time zone information was kept inside some to-be-checked-for responses - temporary bugfix replaced by permanent one for message-induced off-by-one error (potential segfault) (see 4.6.2) The analysis has been completed and a better fix been crafted and integrated. - bugfix(minor): status variable was uninitialized However, this would have caused harm only if NO parser modules at all were loaded, which would lead to a defunctional configuration at all. And, even more important, this is impossible as two parser modules are built-in and thus can not be "not loaded", so we always have a minimum of two. --------------------------------------------------------------------------- Version 5.4.1 [v5-stable] (rgerhards), 2010-03-?? - added new property replacer option "date-rfc3164-buggyday" primarily to ease migration from syslog-ng. See property replacer doc for details. [backport from 5.5.3 because urgently needed by some] - imported all bugfixes vom 4.6.2 (see below) --------------------------------------------------------------------------- Version 5.4.0 [v5-stable] (rgerhards), 2010-03-08 *************************************************************************** * This is a new stable v5 version. It contains all fixes and enhancements * * made during the 5.3.x phase as well as those listed below. * * Note that the 5.2.x series was quite buggy and as such all users are * * strongly advised to upgrade to 5.4.0. * *************************************************************************** - bugfix: omruleset failed to work in many cases bug tracker: http://bugzilla.adiscon.com/show_bug.cgi?id=179 Thanks to Ryan B. Lynch for reporting this issue. - bugfix: comment char ('#') in literal terminated script parsing and thus could not be used. but tracker: http://bugzilla.adiscon.com/show_bug.cgi?id=119 [merged in from v3.22.2] --------------------------------------------------------------------------- Version 5.3.7 [BETA] (rgerhards), 2010-01-27 - bugfix: queues in direct mode could case a segfault, especially if an action failed for action queues. The issue was an invalid increment of a stack-based pointer which lead to destruction of the stack frame and thus a segfault on function return. Thanks to Michael Biebl for alerting us on this problem. - bugfix: hostname accidently set to IP address for some message sources, for example imudp. Thanks to Anton for reporting this bug. [imported v4] - bugfix: ompgsql had problems with transaction support, what actually rendered it unsuable. Thanks to forum user "horhe" for alerting me on this bug and helping to debug/fix it! [imported from 5.3.6] - bugfix: $CreateDirs variable not properly initialized, default thus was random (but most often "on") [imported from v3] - bugfix: potential segfaults during queue shutdown (bugs require certain non-standard settings to appear) Thanks to varmojfekoj for the patch [imported from 4.5.8] [backport from 5.5.2] - bugfix: wrong memory assignment for a config variable (probably without causing any harm) [backport from 5.2.2] - bugfix: rsyslog hangs when writing to a named pipe which nobody was reading. Thanks to Michael Biebl for reporting this bug. Bugzilla entry: http://bugzilla.adiscon.com/show_bug.cgi?id=169 [imported from 4.5.8] --------------------------------------------------------------------------- Version 5.3.6 [BETA] (rgerhards), 2010-01-13 - bugfix: ompgsql did not properly check the server connection in tryResume(), which could lead to rsyslog running in a thight loop - bugfix: suspension during beginTransaction() was not properly handled by rsyslog core - bugfix: omfile output was only written when buffer was full, not at end of transaction - bugfix: commit transaction was not properly conveyed to message layer, potentially resulting in non-message destruction and thus hangs - bugfix: enabling GSSServer crashes rsyslog startup Thanks to Tomas Kubina for the patch [imgssapi] - bugfix (kind of): check if TCP connection is still alive if using TLS Thanks to Jonathan Bond-Caron for the patch. - bugfix: $CreateDirs variable not properly initialized, default thus was random (but most often "on") [imported from v3] - bugfix: ompgsql had problems with transaction support, what actually rendered it unsuable. Thanks to forum user "horhe" for alerting me on this bug and helping to debug/fix it! - bugfix: memory leak when sending messages in zip-compressed format Thanks to Naoya Nakazawa for analyzing this issue and providing a patch. - worked around an issue where omfile failed to compile on 32 bit platforms under some circumstances (this smells like a gcc problem, but a simple solution was available). Thanks to Kenneth Marshall for some advice. [backported from 5.5.x branch] --------------------------------------------------------------------------- Version 5.3.5 [BETA] (rgerhards), 2009-11-13 - some light performance enhancement by replacing time() call with much faster (at least under linux) gettimeofday() calls. - some improvement of omfile performance with dynafiles saved costly time() calls by employing a logical clock, which is sufficient for the use case - bugfix: omudpspoof miscalculated source and destination ports while this was probably not noticed for source ports, it resulted in almost all destination ports being wrong, except for the default port of 514, which by virtue of its binary representation was calculated correct (and probably thus the bug not earlier detected). - bugfixes imported from earlier releases * bugfix: named pipes did no longer work (they always got an open error) this was a regression from the omfile rewrite in 4.5.0 * bugfix(testbench): sequence check was not always performed correctly, that could result in tests reporting success when they actually failed - improved testbench: added tests for UDP forwarding and omudpspoof - doc bugfix: omudpspoof had wrong config command names ("om" missing) - bugfix [imported from 4.4.3]: $ActionExecOnlyOnceEveryInterval did not work. - [inport v4] improved testbench, contains now tcp and gzip test cases - [import v4] added a so-called "On Demand Debug" mode, in which debug output can be generated only after the process has started, but not right from the beginning. This is assumed to be useful for hard-to-find bugs. Also improved the doc on the debug system. - bugfix: segfault on startup when -q or -Q option was given [imported from v3-stable] --------------------------------------------------------------------------- Version 5.3.4 [DEVEL] (rgerhards), 2009-11-04 - added the ability to create custom message parsers - added $RulesetParser config directive that permits to bind specific parsers to specific rulesets - added omruleset output module, which provides great flexibility in action processing. THIS IS A VERY IMPORTANT ADDITION, see its doc for why. - added the capability to have ruleset-specific main message queues This offers considerable additional flexibility AND superior performance (in cases where multiple inputs now can avoid lock contention) - bugfix: correct default for escape ('#') character restored This was accidently changed to '\\', thanks to David Lang for reporting - bugfix(testbench): testcase did not properly wait for rsyslogd shutdown thus some unpredictable behavior and a false negative test result could occur. --------------------------------------------------------------------------- Version 5.3.3 [DEVEL] (rgerhards), 2009-10-27 - simplified and thus speeded up the queue engine, also fixed some potential race conditions (in very unusual shutdown conditions) along the way. The threading model has seriously changes, so there may be some regressions. - enhanced test environment (inlcuding testbench): support for enhancing probability of memory addressing failure by using non-NULL default value for malloced memory (optional, only if requested by configure option). This helps to track down some otherwise undetected issues within the testbench. - bugfix: potential abort if inputname property was not set primarily a problem of imdiag - bugfix: message processing states were not set correctly in all cases however, this had no negative effect, as the message processing state was not evaluated when a batch was deleted, and that was the only case where the state could be wrong. --------------------------------------------------------------------------- Version 5.3.2 [DEVEL] (rgerhards), 2009-10-21 - enhanced omfile to support transactional interface. This will increase performance in many cases. - added multi-ruleset support to imudp - re-enabled input thread termination handling that does avoid thread cancellation where possible. This provides a more reliable mode of rsyslogd termination (canceling threads my result in not properly freed resouces and potential later hangs, even though we perform proper cancel handling in our code). This is part of an effort to reduce thread cancellation as much as possible in rsyslog. NOTE: the code previously written code for this functionality had a subtle race condition. The new code solves that. - enhanced immark to support non-cancel input module termination - improved imudp so that epoll can be used in more environments, fixed potential compile time problem if EPOLL_CLOEXEC is not available. - some cleanup/slight improvement: * changed imuxsock to no longer use deprecated submitAndParseMsg() IF * changed submitAndParseMsg() interface to be a wrapper around the new way of message creation/submission. This enables older plugins to be used together with the new interface. The removal also enables us to drop a lot of duplicate code, reducing complexity and increasing maintainability. - bugfix: segfault when starting up with an invalid .qi file for a disk queue Failed for both pure disk as well as DA queues. Now, we emit an error message and disable disk queueing facility. - bugfix: potential segfault on messages with empty MSG part. This was a recently introduced regression. - bugfix: debug string larger than 1K were improperly displayed. Max size is now 32K, and if a string is even longer it is meaningfully truncated. --------------------------------------------------------------------------- Version 5.3.1 [DEVEL] (rgerhards), 2009-10-05 - added $AbortOnUncleanConfig directive - permits to prevent startup when there are problems with the configuration file. See it's doc for details. - included some important fixes from v4-stable: * bugfix: invalid handling of zero-sized messages * bugfix: zero-sized UDP messages are no longer processed * bugfix: random data could be appended to message * bugfix: reverse lookup reduction logic in imudp do DNS queries too often - bugfixes imported from 4.5.4: * bugfix: potential segfault in stream writer on destruction * bugfix: potential race in object loader (obj.c) during use/release * bugfixes: potential problems in out file zip writer --------------------------------------------------------------------------- Version 5.3.0 [DEVEL] (rgerhards), 2009-09-14 - begun to add simple GUI programs to gain insight into running rsyslogd instances and help setup and troubleshooting (active via the --enable-gui ./configure switch) - changed imudp to utilize epoll(), where available. This shall provide slightly better performance (just slightly because we called select() rather infrequently on a busy system) --------------------------------------------------------------------------- Version 5.2.2 [v5-stable] (rgerhards), 2009-11-?? - bugfix: enabling GSSServer crashes rsyslog startup Thanks to Tomas Kubina for the patch [imgssapi] --------------------------------------------------------------------------- Version 5.2.1 [v5-stable] (rgerhards), 2009-11-02 - bugfix [imported from 4.4.3]: $ActionExecOnlyOnceEveryInterval did not work. - bugfix: segfault on startup when -q or -Q option was given [imported from v3-stable] --------------------------------------------------------------------------- Version 5.2.0 [v5-stable] (rgerhards), 2009-11-02 This is a re-release of version 5.1.6 as stable after we did not get any bug reports during the whole beta phase. Still, this first v5-stable may not be as stable as one hopes for, I am not sure if we did not get bug reports just because nobody tried it. Anyhow, we need to go forward and so we have the initial v5-stable. --------------------------------------------------------------------------- Version 5.1.6 [v5-beta] (rgerhards), 2009-10-15 - feature imports from v4.5.6 - bugfix: potential race condition when queue worker threads were terminated - bugfix: solved potential (temporary) stall of messages when the queue was almost empty and few new data added (caused testbench to sometimes hang!) - fixed some race condition in testbench - added more elaborate diagnostics to parts of the testbench - bugfixes imported from 4.5.4: * bugfix: potential segfault in stream writer on destruction * bugfix: potential race in object loader (obj.c) during use/release * bugfixes: potential problems in out file zip writer - included some important fixes from 4.4.2: * bugfix: invalid handling of zero-sized messages * bugfix: zero-sized UDP messages are no longer processed * bugfix: random data could be appended to message * bugfix: reverse lookup reduction logic in imudp do DNS queries too often --------------------------------------------------------------------------- Version 5.1.5 [v5-beta] (rgerhards), 2009-09-11 - added new config option $ActionWriteAllMarkMessages this option permites to process mark messages under all circumstances, even if an action was recently called. This can be useful to use mark messages as a kind of heartbeat. - added new config option $InputUnixListenSocketCreatePath to permit the auto-creation of pathes to additional log sockets. This turns out to be useful if they reside on temporary file systems and rsyslogd starts up before the daemons that create these sockets (rsyslogd always creates the socket itself if it does not exist). - added $LogRSyslogStatusMessages configuration directive permitting to turn off rsyslog start/stop/HUP messages. See Debian ticket http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=463793 - bugfix: hostnames with dashes in them were incorrectly treated as malformed, thus causing them to be treated as TAG (this was a regression introduced from the "rfc3164 strict" change in 4.5.0). Testbench has been updated to include a smaple message with a hostname containing a dash. - bugfix: strings improperly reused, resulting in some message properties be populated with strings from previous messages. This was caused by an improper predicate check. - added new config directive $omfileForceChown [import from 4.7.0] --------------------------------------------------------------------------- Version 5.1.4 [DEVEL] (rgerhards), 2009-08-20 - legacy syslog parser changed so that it now accepts date stamps in wrong case. Some devices seem to create them and I do not see any harm in supporting that. - added $InputTCPMaxListeners directive - permits to specify how many TCP servers shall be possible (default is 20). - bugfix: memory leak with some input modules. Those inputs that use parseAndSubmitMsg() leak two small memory blocks with every message. Typically, those process only relatively few messages, so the issue does most probably not have any effect in practice. - bugfix: if tcp listen port could not be created, no error message was emitted - bugfix: discard action did not work (did not discard messages) - bugfix: discard action caused segfault - bugfix: potential segfault in output file writer (omfile) In async write mode, we use modular arithmetic to index the output buffer array. However, the counter variables accidently were signed, thus resulting in negative indizes after integer overflow. That in turn could lead to segfaults, but was depending on the memory layout of the instance in question (which in turn depended on a number of variables, like compile settings but also configuration). The counters are now unsigned (as they always should have been) and so the dangling mis-indexing does no longer happen. This bug potentially affected all installations, even if only some may actually have seen a segfault. --------------------------------------------------------------------------- Version 5.1.3 [DEVEL] (rgerhards), 2009-07-28 - architecture change: queue now always has at least one worker thread if not running in direct mode. Previous versions could run without any active workers. This simplifies the code at a very small expense. See v5 compatibility note document for more in-depth discussion. - enhance: UDP spoofing supported via new output module omudpspoof See the omudpspoof documentation for details and samples - bugfix: message could be truncated after TAG, often when forwarding This was a result of an internal processing error if maximum field sizes had been specified in the property replacer. - bugfix: minor static memory leak while reading configuration did NOT leak based on message volume - internal: added ability to terminate input modules not via pthread_cancel but an alternate approach via pthread_kill. This is somewhat safer as we do not need to think about the cancel-safeness of all libraries we use. However, not all inputs can easily supported, so this now is a feature that can be requested by the input module (the most important ones request it). --------------------------------------------------------------------------- Version 5.1.2 [DEVEL] (rgerhards), 2009-07-08 - bugfix: properties inputname, fromhost, fromhost-ip, msg were lost when working with disk queues - some performance enhancements - bugfix: abort condition when RecvFrom was not set and message reduction was on. Happend e.g. with imuxsock. - added $klogConsoleLogLevel directive which permits to set a new console log level while rsyslog is active - some internal code cleanup --------------------------------------------------------------------------- Version 5.1.1 [DEVEL] (rgerhards), 2009-07-03 - bugfix: huge memory leak in queue engine (made rsyslogd unusable in production). Occured if at least one queue was in direct mode (the default for action queues) - imported many performance optimizations from v4-devel (4.5.0) - bugfix: subtle (and usually irrelevant) issue in timout processing timeout could be one second too early if nanoseconds wrapped - set a more sensible timeout for shutdow, now 1.5 seconds to complete processing (this also removes those cases where the shutdown message was not written because the termination happened before it) --------------------------------------------------------------------------- Version 5.1.0 [DEVEL] (rgerhards), 2009-05-29 *********************************** NOTE ********************************** The v5 versions of rsyslog feature a greatly redesigned queue engine. The major theme for the v5 release is twofold: a) greatly improved performance b) enable audit-grade processing Here, audit-grade processing means that rsyslog, if used together with audit-grade transports and configured correctly, will never lose messages that already have been acknowledged, not even in fatal failure cases like sudden loss of power. Note that large parts of rsyslog's important core components have been restructured to support these design goals. As such, early versions of the engine will probably be less stable than the v3/v4 engine. Also note that the initial versions do not cover all and everything. As usual, the code will evolve toward the final goal as version numbers increase. *********************************** NOTE ********************************** - redesigned queue engine so that it supports ultra-reliable operations This resulted in a rewrite of large parts. The new capability can be used to build audit-grade systems on the basis of rsyslog. - added $MainMsgQueueDequeueBatchSize and $ActionQueueDequeueBatchSize configuration directives - implemented a new transactional output module interface which provides superior performance (for databases potentially far superior performance) - increased ompgsql performance by adapting to new transactional output module interface --------------------------------------------------------------------------- Version 4.8.1 [v4-stable], 2011-09-?? - increased max config file line size to 64k We now also emit an error message if even 64k is not enough (not doing so previously may rightfully be considered as a bug) - bugfix: omprog made rsyslog abort on startup if not binary to execute was configured - bugfix: $ActionExecOnlyOnce interval did not work properly Thanks to Tomas Heinrich for the patch - bugfix: potential abort if ultra-large file io buffers are used and dynafile cache exhausts address space (primarily a problem on 32 bit platforms) - bugfix: potential abort after reading invalid X.509 certificate closes: http://bugzilla.adiscon.com/show_bug.cgi?id=290 Thanks to Tomas Heinrich for the patch. - bugfix: potential fatal abort in omgssapi Thanks to Tomas Heinrich for the patch. - added doc for omprog - FQDN hostname for multihomed host was not always set to the correct name if multiple aliases existed. Thanks to Tomas Heinreich for the patch. - re-licensed larger parts of the codebase under the Apache license 2.0 --------------------------------------------------------------------------- Version 4.8.0 [v4-stable] (rgerhards), 2011-09-07 *************************************************************************** * This is a new stable v4 version. It contains all fixes and enhancements * * made during the 4.7.x phase as well as those listed below. * * Note: major new development to v4 is concluded and will only be done * * for custom projects. * *************************************************************************** There are no changes compared to 4.7.5, just a re-release with the new version number as new v4-stable. The most important new feature is Solaris support. --------------------------------------------------------------------------- Version 4.7.5 [v4-beta], 2011-09-01 - bugfix/security: off-by-two bug in legacy syslog parser, CVE-2011-3200 - bugfix: potential misadressing in property replacer - bugfix: The NUL-Byte for the syslogtag was not copied in MsgDup (msg.c) --------------------------------------------------------------------------- Version 4.7.4 [v4-beta] (rgerhards), 2011-07-11 - added support for the ":omusrmsg:" syntax in configuring user messages - added support for the ":omfile:" syntax in configuring user messages - added $LocalHostName config directive - bugfix: PRI was invalid on Solaris for message from local log socket Version 4.7.3 [v4-devel] (rgerhards), 2010-11-25 - added omuxsock, which permits to write message to local Unix sockets this is the counterpart to imuxsock, enabling fast local forwarding - added imptcp, a simplified, Linux-specific and potentielly fast syslog plain tcp input plugin (NOT supporting TLS!) - bugfix: a couple of problems that imfile had on some platforms, namely Ubuntu (not their fault, but occured there) - bugfix: imfile utilizes 32 bit to track offset. Most importantly, this problem can not experienced on Fedora 64 bit OS (which has 64 bit long's!) - added the $InputFilePersistStateInterval config directive to imfile - changed imfile so that the state file is never deleted (makes imfile more robust in regard to fatal failures) --------------------------------------------------------------------------- Version 4.7.2 [v4-devel] (rgerhards), 2010-05-03 - bugfix: problems with atomic operations emulaton replaced atomic operation emulation with new code. The previous code seemed to have some issue and also limited concurrency severely. The whole atomic operation emulation has been rewritten. - added new $Sleep directive to hold processing for a couple of seconds during startup - bugfix: programname filter in ! configuration can not be reset Thanks to Kiss Gabor for the patch. --------------------------------------------------------------------------- Version 4.7.1 [v4-devel] (rgerhards), 2010-04-22 - Solaris support much improved -- was not truely usable in 4.7.0 Solaris is no longer supported in imklog, but rather there is a new plugin imsolaris, which is used to pull local log sources on a Solaris machine. - testbench improvement: Java is no longer needed for testing tool creation --------------------------------------------------------------------------- Version 4.7.0 [v4-devel] (rgerhards), 2010-04-14 - new: support for Solaris added (but not yet the Solaris door API) - added function getenv() to RainerScript - added new config option $InputUnixListenSocketCreatePath to permit the auto-creation of pathes to additional log sockets. This turns out to be useful if they reside on temporary file systems and rsyslogd starts up before the daemons that create these sockets (rsyslogd always creates the socket itself if it does not exist). - added $LogRSyslogStatusMessages configuration directive permitting to turn off rsyslog start/stop/HUP messages. See Debian ticket http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=463793 - added new config directive $omfileForceChown to (try to) fix some broken system configs. See ticket for details: http://bugzilla.adiscon.com/show_bug.cgi?id=150 - added $EscapeControlCharacterTab config directive Thanks to Jonathan Bond-Caron for the patch. - added option to use unlimited-size select() calls Thanks to varmjofekoj for the patch - debugondemand mode caused backgrounding to fail - close to a bug, but I'd consider the ability to background in this mode a new feature... - bugfix (kind of): check if TCP connection is still alive if using TLS Thanks to Jonathan Bond-Caron for the patch. - imported changes from 4.5.7 and below - bugfix: potential segfault when -p command line option was used Thanks for varmojfekoj for pointing me at this bug. - imported changes from 4.5.6 and below --------------------------------------------------------------------------- Version 4.6.8 [v4-stable] (rgerhards), 2011-09-01 - bugfix/security: off-by-two bug in legacy syslog parser, CVE-2011-3200 - bugfix: potential misadressing in property replacer - bugfix: memcpy overflow can occur in allowed sender checking if a name is resolved to IPv4-mapped-on-IPv6 address Found by Ismail Dönmez at suse - bugfix: The NUL-Byte for the syslogtag was not copied in MsgDup (msg.c) --------------------------------------------------------------------------- Version 4.6.7 [v4-stable] (rgerhards), 2011-07-11 - added support for the ":omusrmsg:" syntax in configuring user messages - added support for the ":omfile:" syntax for actions --------------------------------------------------------------------------- Version 4.6.6 [v4-stable] (rgerhards), 2011-06-24 - bugfix: memory leak in imtcp & subsystems under some circumstances This leak is tied to error conditions which lead to incorrect cleanup of some data structures. [backport from v6, limited testing under v4] - bugfix: invalid processing in QUEUE_FULL condition If the the multi-submit interface was used and a QUEUE_FULL condition occured, the failed message was properly destructed. However, the rest of the input batch, if it existed, was not processed. So this lead to potential loss of messages and a memory leak. The potential loss of messages was IMHO minor, because they would have been dropped in most cases due to the queue remaining full, but very few lucky ones from the batch may have made it. Anyhow, this has now been changed so that the rest of the batch is properly tried to be enqueued and, if not possible, destructed. - bugfix: invalid storage type for config variables - bugfix: stream driver mode was not correctly set on tcp ouput on big endian systems. thanks varmojfekoj for the patch - bugfix: IPv6-address could not be specified in omrelp this was due to improper parsing of ":" closes: http://bugzilla.adiscon.com/show_bug.cgi?id=250 - bugfix: memory and file descriptor leak in stream processing Leaks could occur under some circumstances if the file stream handler errored out during the open call. Among others, this could cause very big memory leaks if there were a problem with unreadable disk queue files. In regard to the memory leak, this closes: http://bugzilla.adiscon.com/show_bug.cgi?id=256 - bugfix: imfile potentially duplicates lines This can happen when 0 bytes are read from the input file, and some writer appends data to the file BEFORE we check if a rollover happens. The check for rollover uses the inode and size as a criterion. So far, we checked for equality of sizes, which is not given in this scenario, but that does not indicate a rollover. From the source code comments: Note that when we check the size, we MUST NOT check for equality. The reason is that the file may have been written right after we did try to read (so the file size has increased). That is NOT in indicator of a rollover (this is an actual bug scenario we experienced). So we need to check if the new size is smaller than what we already have seen! Also, under some circumstances an invalid truncation was detected. This code has now been removed, a file change (and thus resent) is only detected if the inode number changes. - bugfix: a couple of problems that imfile had on some platforms, namely Ubuntu (not their fault, but occured there) - bugfix: imfile utilizes 32 bit to track offset. Most importantly, this problem can not experienced on Fedora 64 bit OS (which has 64 bit long's!) - bugfix: abort if imfile reads file line of more than 64KiB Thanks to Peter Eisentraut for reporting and analysing this problem. bug tracker: http://bugzilla.adiscon.com/show_bug.cgi?id=221 - bugfix: omlibdbi did not use password from rsyslog.con closes: http://bugzilla.adiscon.com/show_bug.cgi?id=203 - bugfix: TCP connection invalidly aborted when messages needed to be discarded (due to QUEUE_FULL or similar problem) - bugfix: a slightly more informative error message when a TCP connections is aborted - bugfix: timestamp was incorrectly calculated for timezones with minute offset closes: http://bugzilla.adiscon.com/show_bug.cgi?id=271 - some improvements thanks to clang's static code analyzer o overall cleanup (mostly unnecessary writes and otherwise unused stuff) o bugfix: fixed a very remote problem in msg.c which could occur when running under extremely low memory conditions --------------------------------------------------------------------------- Version 4.6.5 [v4-stable] (rgerhards), 2010-11-24 - bugfix(important): problem in TLS handling could cause rsyslog to loop in a tight loop, effectively disabling functionality and bearing the risk of unresponsiveness of the whole system. Bug tracker: http://bugzilla.adiscon.com/show_bug.cgi?id=194 --------------------------------------------------------------------------- Version 4.6.4 [v4-stable] (rgerhards), 2010-08-05 - bugfix: zero-sized (empty) messages were processed by imtcp they are now dropped as they always should have been - bugfix: programname filter in ! configuration can not be reset Thanks to Kiss Gabor for the patch. --------------------------------------------------------------------------- Version 4.6.3 [v4-stable] (rgerhards), 2010-07-07 - improvded testbench - added test with truly random data received via syslog to test robustness - added new configure option that permits to disable and enable an extended testbench - bugfix: segfault on HUP when "HUPIsRestart" was set to "on" thanks varmojfekoj for the patch - bugfix: default for $OMFileFlushOnTXEnd was wrong ("off"). This, in default mode, caused buffered writing to be used, what means that it looked like no output were written or partial lines. Thanks to Michael Biebl for pointing out this bug. - bugfix: testbench failed when not executed in UTC+1 timezone accidently, the time zone information was kept inside some to-be-checked-for responses - temporary bugfix replaced by permanent one for message-induced off-by-one error (potential segfault) (see 4.6.2) The analysis has been completed and a better fix been crafted and integrated. - bugfix: the T/P/E config size specifiers did not work properly under all 32-bit platforms - bugfix: local unix system log socket was deleted even when it was not configured - some doc fixes; incorrect config samples could cause confusion thanks to Anthony Edwards for pointing the problems out --------------------------------------------------------------------------- Version 4.6.2 [v4-stable] (rgerhards), 2010-03-26 - new feature: "." action type added to support writing files to relative pathes (this is primarily meant as a debug aid) - added replacements for atomic instructions on systems that do not support them. [backport of Stefen Sledz' patch for v5) - new feature: $OMFileAsyncWriting directive added it permits to specifiy if asynchronous writing should be done or not - bugfix(temporary): message-induced off-by-one error (potential segfault) Some types of malformed messages could trigger an off-by-one error (for example, \0 or \n as the last character, and generally control character escaption is questionable). This is due to not strictly following a the \0 or string counted string paradigm (during the last optimization on the cstring class). As a temporary fix, we have introduced a proper recalculation of the size. However, a final patch is expected in the future. See bug tracker for further details and when the final patch will be available: http://bugzilla.adiscon.com/show_bug.cgi?id=184 Note that the current patch is considered sufficient to solve the situation, but it requires a bit more runtime than desirable. - bugfix: potential segfault in dynafile cache This bug was triggered by an open failure. The the cache was full and a new entry needed to be placed inside it, a victim for eviction was selected. That victim was freed, then the open of the new file tried. If the open failed, the victim entry was still freed, and the function exited. However, on next invocation and cache search, the victim entry was used as if it were populated, most probably resulting in a segfault. - bugfix: race condition during directory creation If multiple files try to create a directory at (almost) the same time, some of them may fail. This is a data race and also exists with other processes that may create the same directory. We do now check for this condition and gracefully handle it. - bugfix: potential re-use of free()ed file stream object in omfile when dynaCache is enabled, the cache is full, a new entry needs to be allocated, thus the LRU discarded, then a new entry is opend and that fails. In that case, it looks like the discarded stream may be reused improperly (based on code analysis, test case and confirmation pending) - added new property replacer option "date-rfc3164-buggyday" primarily to ease migration from syslog-ng. See property replacer doc for details. [backport from 5.5.3 because urgently needed by some] - improved testbench - bugfix: invalid buffer write in (file) stream class currently being accessed buffer could be overwritten with new data. While this probably did not cause access violations, it could case loss and/or duplication of some data (definitely a race with no deterministic outcome) - bugfix: potential hang condition during filestream close predicate was not properly checked when waiting for the background file writer - bugfix: improper synchronization when "$OMFileFlushOnTXEnd on" was used Internal data structures were not properly protected due to missing mutex calls. - bugfix: potential data loss during file stream shutdown - bugfix: potential problems during file stream shutdown The shutdown/close sequence was not clean, what potentially (but unlikely) could lead to some issues. We have not been able to describe any fatal cases, but there was some bug potential. Sequence has now been straighted out. - bugfix: potential problem (loop, abort) when file write error occured When a write error occured in stream.c, variable iWritten had the error code but this was handled as if it were the actual number of bytes written. That was used in pointer arithmetic later on, and thus could lead to all sorts of problems. However, this could only happen if the error was EINTR or the file in question was a tty. All other cases were handled properly. Now, iWritten is reset to zero in such cases, resulting in proper retries. - bugfix: $omfileFlushOnTXEnd was turned on when set to off and vice versa due to an invalid check - bugfix: recent patch to fix small memory leak could cause invalid free. This could only happen during config file parsing. - bugfix(minor): handling of extremely large strings in dbgprintf() fixed Previously, it could lead to garbagge output and, in extreme cases, also to segfaults. Note: this was a problem only when debug output was actually enabled, so it caused no problem in production use. - bugfix(minor): BSD_SO_COMPAT query function had some global vars not properly initialized. However, in practice the loader initializes them with zero, the desired value, so there were no actual issue in almost all cases. --------------------------------------------------------------------------- Version 4.6.1 [v4-stable] (rgerhards), 2010-03-04 - re-enabled old pipe output (using new module ompipe, built-in) after some problems with pipes (and especially in regard to xconsole) were discovered. Thanks to Michael Biebl for reporting the issues. - bugfix: potential problems with large file support could cause segfault ... and other weird problems. This seemed to affect 32bit-platforms only, but I can not totally outrule there were issues on other platforms as well. The previous code could cause system data types to be defined inconsistently, and that could lead to various troubles. Special thanks go to the Mandriva team for identifying an initial problem, help discussing it and ultimately a fix they contributed. - bugfix: fixed problem that caused compilation on FreeBSD 9.0 to fail. bugtracker: http://bugzilla.adiscon.com/show_bug.cgi?id=181 Thanks to Christiano for reporting. - bugfix: potential segfault in omfile when a dynafile open failed In that case, a partial cache entry was written, and some internal pointers (iCurrElt) not correctly updated. In the next iteration, that could lead to a segfault, especially if iCurrElt then points to the then-partial record. Not very likely, but could happen in practice. - bugfix (theoretical): potential segfault in omfile under low memory condition. This is only a theoretical bug, because it would only happen when strdup() fails to allocate memory - which is highly unlikely and will probably lead to all other sorts of errors. - bugfix: comment char ('#') in literal terminated script parsing and thus could not be used. but tracker: http://bugzilla.adiscon.com/show_bug.cgi?id=119 [merged in from v3.22.2] --------------------------------------------------------------------------- Version 4.6.0 [v4-stable] (rgerhards), 2010-02-24 *************************************************************************** * This is a new stable v4 version. It contains all fixes and enhancements * * made during the 4.5.x phase as well as those listed below. * * Note: this version is scheduled to conclude the v4 development process. * * Do not expect any more new developments in v4. The focus is now * * on v5 (what also means we have a single devel branch again). * * ("development" means new feature development, bug fixes are of * * course provided for v4-stable) * *************************************************************************** - improved testbench to contain samples for totally malformed messages which miss parts of the message content - bugfix: some malformed messages could lead to a missing LF inside files or some other missing parts of the template content. - bugfix: if a message ended immediately with a hostname, the hostname was mistakenly interpreted as TAG, and localhost be used as hostname - bugfix: message without MSG part could case a segfault [backported from v5 commit 98d1ed504ec001728955a5bcd7916f64cd85f39f] This actually was a "recent" regression, but I did not realize that it was introduced by the performance optimization in v4-devel. Shame on me for having two devel versions at the same time... --------------------------------------------------------------------------- Version 4.5.8 [v4-beta] (rgerhards), 2010-02-10 - enhanced doc for using PostgreSQL Thanks to Marc Schiffbauer for the new/updated doc - bugfix: property replacer returned invalid parameters under some (unusual) conditions. In extreme cases, this could lead to garbled logs and/or a system failure. - bugfix: invalid length returned (often) when using regular expressions inside the property replacer - bugfix: submatch regex in property replacer did not honor "return 0 on no match" config case - bugfix: imuxsock incorrectly stated inputname "imudp" Thanks to Ryan Lynch for reporting this. - (slightly) enhanced support for FreeBSD by setting _PATH_MODDIR to the correct value on FreeBSD. Thanks to Cristiano for the patch. - bugfix: -d did not enable display of debug messages regression from introduction of "debug on demand" mode Thanks to Michael Biebl for reporting this bug - bugfix: blanks inside file names did not terminate file name parsing. This could reslult in the whole rest of a line (including comments) to be treated as file name in "write to file" actions. Thanks to Jack for reporting this issue. - bugfix: rsyslog hang when writing to a named pipe which nobody was reading. Thanks to Michael Biebl for reporting this bug. Bugzilla entry: http://bugzilla.adiscon.com/show_bug.cgi?id=169 - bugfix: potential segfaults during queue shutdown (bugs require certain non-standard settings to appear) Thanks to varmojfekoj for the patch --------------------------------------------------------------------------- Version 4.5.7 [v4-beta] (rgerhards), 2009-11-18 - added a so-called "On Demand Debug" mode, in which debug output can be generated only after the process has started, but not right from the beginning. This is assumed to be useful for hard-to-find bugs. Also improved the doc on the debug system. - bugfix (kind of): check if TCP connection is still alive if using TLS Thanks to Jonathan Bond-Caron for the patch. - bugfix: hostname accidently set to IP address for some message sources, for example imudp. Thanks to Anton for reporting this bug. - bugfix [imported from 4.4.3]: $ActionExecOnlyOnceEveryInterval did not work. --------------------------------------------------------------------------- Version 4.5.6 [v4-beta] (rgerhards), 2009-11-05 - bugfix: named pipes did no longer work (they always got an open error) this was a regression from the omfile rewrite in 4.5.0 - bugfix(minor): diag function returned wrong queue memeber count for the main queue if an active DA queue existed. This had no relevance to real deployments (assuming they are not running the debug/diagnostic module...), but sometimes caused grief and false alerts in the testbench. - included some important fixes from v4-stable: * bugfix: invalid handling of zero-sized messages * bugfix: zero-sized UDP messages are no longer processed * bugfix: random data could be appended to message * bugfix: reverse lookup reduction logic in imudp do DNS queries too often - bugfix(testbench): testcase did not properly wait for rsyslod shutdown thus some unpredictable behavior and a false negative test result could occur. [BACKPORTED from v5] - bugfix(testbench): sequence check was not always performed correctly, that could result in tests reporting success when they actually failed --------------------------------------------------------------------------- Version 4.5.5 [v4-beta] (rgerhards), 2009-10-21 - added $InputTCPServerNotifyOnConnectionClose config directive see doc for details - bugfix: debug string larger than 1K were improperly displayed. Max size is now 32K - bugfix: invalid storage class selected for some size config parameters. This resulted in wrong values. The most prominent victim was the directory creation mode, which was set to zero in some cases. For details, see related blog post: http://blog.gerhards.net/2009/10/another-note-on-hard-to-find-bugs.html --------------------------------------------------------------------------- Version 4.5.4 [v4-beta] (rgerhards), 2009-09-29 - bugfix: potential segfault in stream writer on destruction Most severely affected omfile. The problem was that some buffers were freed before the asynchronous writer thread was shut down. So the writer thread accessed invalid data, which may even already be overwritten. Symptoms (with omfile) were segfaults, grabled data and files with random names placed around the file system (most prominently into the root directory). Special thanks to Aaron for helping to track this down. - bugfix: potential race in object loader (obj.c) during use/release of object interface - bugfixes: potential problems in out file zip writer. Problems could lead to abort and/or memory leak. The module is now hardened in a very conservative way, which is sub-optimal from a performance point of view. This should be improved if it has proven reliable in practice. --------------------------------------------------------------------------- Version 4.5.3 [v4-beta] (rgerhards), 2009-09-17 - bugfix: repeated messages were incorrectly processed this could lead to loss of the repeated message content. As a side- effect, it could probably also be possible that some segfault occurs (quite unlikely). The root cause was that some counters introduced during the malloc optimizations were not properly duplicated in MsgDup(). Note that repeated message processing is not enabled by default. - bugfix: message sanitation had some issues: - control character DEL was not properly escaped - NUL and LF characters were not properly stripped if no control character replacement was to be done - NUL characters in the message body were silently dropped (this was a regeression introduced by some of the recent optimizations) - bugfix: strings improperly reused, resulting in some message properties be populated with strings from previous messages. This was caused by an improper predicate check. [backported from v5] - fixed some minor portability issues - bugfix: reverse lookup reduction logic in imudp do DNS queries too often [imported from 4.4.2] --------------------------------------------------------------------------- Version 4.5.2 [v4-beta] (rgerhards), 2009-08-21 - legacy syslog parser changed so that it now accepts date stamps in wrong case. Some devices seem to create them and I do not see any harm in supporting that. - added $InputTCPMaxListeners directive - permits to specify how many TCP servers shall be possible (default is 20). - bugfix: memory leak with some input modules. Those inputs that use parseAndSubmitMsg() leak two small memory blocks with every message. Typically, those process only relatively few messages, so the issue does most probably not have any effect in practice. - bugfix: if tcp listen port could not be created, no error message was emitted - bugfix: potential segfault in output file writer (omfile) In async write mode, we use modular arithmetic to index the output buffer array. However, the counter variables accidently were signed, thus resulting in negative indizes after integer overflow. That in turn could lead to segfaults, but was depending on the memory layout of the instance in question (which in turn depended on a number of variables, like compile settings but also configuration). The counters are now unsigned (as they always should have been) and so the dangling mis-indexing does no longer happen. This bug potentially affected all installations, even if only some may actually have seen a segfault. - bugfix: hostnames with dashes in them were incorrectly treated as malformed, thus causing them to be treated as TAG (this was a regression introduced from the "rfc3164 strict" change in 4.5.0). --------------------------------------------------------------------------- Version 4.5.1 [DEVEL] (rgerhards), 2009-07-15 - CONFIG CHANGE: $HUPisRestart default is now "off". We are doing this to support removal of restart-type HUP in v5. - bugfix: fromhost-ip was sometimes truncated - bugfix: potential segfault when zip-compressed syslog records were received (double free) - bugfix: properties inputname, fromhost, fromhost-ip, msg were lost when working with disk queues - performance enhancement: much faster, up to twice as fast (depending on configuration) - bugfix: abort condition when RecvFrom was not set and message reduction was on. Happend e.g. with imuxsock. - added $klogConsoleLogLevel directive which permits to set a new console log level while rsyslog is active - bugfix: message could be truncated after TAG, often when forwarding This was a result of an internal processing error if maximum field sizes had been specified in the property replacer. - added ability for the TCP output action to "rebind" its send socket after sending n messages (actually, it re-opens the connection, the name is used because this is a concept very similiar to $ActionUDPRebindInterval). New config directive $ActionSendTCPRebindInterval added for the purpose. By default, rebinding is disabled. This is considered useful for load balancers. - testbench improvements --------------------------------------------------------------------------- Version 4.5.0 [DEVEL] (rgerhards), 2009-07-02 - activation order of inputs changed, they are now activated only after privileges are dropped. Thanks to Michael Terry for the patch. - greatly improved performance - greatly reduced memory requirements of msg object to around half of the previous demand. This means that more messages can be stored in core! Due to fewer cache misses, this also means some performance improvement. - improved config error messages: now contain a copy of the config line that (most likely) caused the error - reduced max value for $DynaFileCacheSize to 1,000 (the former maximum of 10,000 really made no sense, even 1,000 is very high, but we like to keep the user in control ;)). - added capability to fsync() queue disk files for enhanced reliability (also add's speed, because you do no longer need to run the whole file system in sync mode) - more strict parsing of the hostname in rfc3164 mode, hopefully removes false positives (but may cause some trouble with hostname parsing). For details, see this bug tracker: http://bugzilla.adiscon.com/show_bug.cgi?id=126 - omfile rewrite to natively support zip files (includes large extension of the stream class) - added configuration commands (see doc for explanations) * $OMFileZipLevel * $OMFileIOBufferSize * $OMFileFlushOnTXEnd * $MainMsgQueueSyncQueueFiles * $ActionQueueSyncQueueFiles - done some memory accesses explicitely atomic - bugfix: subtle (and usually irrelevant) issue in timout processing timeout could be one second too early if nanoseconds wrapped - set a more sensible timeout for shutdow, now 1.5 seconds to complete processing (this also removes those cases where the shutdown message was not written because the termination happened before it) - internal bugfix: object pointer was only reset to NULL when an object was actually destructed. This most likely had no effect to existing code, but it may also have caused trouble in remote cases. Similarly, the fix may also cause trouble... - bugfix: missing initialization during timestamp creation This could lead to timestamps written in the wrong format, but not to an abort --------------------------------------------------------------------------- Version 4.4.3 [v4-stable] (rgerhards), 2009-10-?? - bugfix: several smaller bugs resolved after flexelint review Thanks to varmojfekoj for the patch. - bugfix: $ActionExecOnlyOnceEveryInterval did not work. This was a regression from the time() optimizations done in v4. Bug tracker: http://bugzilla.adiscon.com/show_bug.cgi?id=143 Thanks to Klaus Tachtler for reporting this bug. - bugfix: potential segfault on queue shutdown Thanks to varmojfekoj for the patch. - bugfix: potential hang condition on queue shutdown [imported from v3-stable] - bugfix: segfault on startup when -q or -Q option was given [imported from v3-stable] --------------------------------------------------------------------------- Version 4.4.2 [v4-stable] (rgerhards), 2009-10-09 - bugfix: invalid handling of zero-sized messages, could lead to mis- addressing and potential memory corruption/segfault - bugfix: zero-sized UDP messages are no longer processed until now, they were forwarded to processing, but this makes no sense Also, it looks like the system seems to provide a zero return code on a UDP recvfrom() from time to time for some internal reasons. These "receives" are now silently ignored. - bugfix: random data could be appended to message, possibly causing segfaults - bugfix: reverse lookup reduction logic in imudp do DNS queries too often A comparison was done between the current and the former source address. However, this was done on the full sockaddr_storage structure and not on the host address only. This has now been changed for IPv4 and IPv6. The end result of this bug could be a higher UDP message loss rate than necessary (note that UDP message loss can not totally be avoided due to the UDP spec) --------------------------------------------------------------------------- Version 4.4.1 [v4-stable] (rgerhards), 2009-09-02 - features requiring Java are automatically disabled if Java is not present (thanks to Michael Biebl for his help!) - bugfix: invalid double-quoted PRI, among others in outgoing messages This causes grief with all receivers. Bug tracker: http://bugzilla.adiscon.com/show_bug.cgi?id=147 - bugfix: Java testing tools were required, even if testbench was disabled This resulted in build errors if no Java was present on the build system, even though none of the selected option actually required Java. (I forgot to backport a similar fix to newer releases). - bugfix (backport): omfwd segfault Note that the orginal (higher version) patch states this happens only when debugging mode is turned on. That statement is wrong: if debug mode is turned off, the message is not being emitted, but the division by zero in the actual parameters still happens. --------------------------------------------------------------------------- Version 4.4.0 [v4-stable] (rgerhards), 2009-08-21 - bugfix: stderr/stdout were not closed to be able to emit error messages, but this caused ssh sessions to hang. Now we close them after the initial initialization. See forum thread: http://kb.monitorware.com/controlling-terminal-issues-t9875.html - bugfix: sending syslog messages with zip compression did not work --------------------------------------------------------------------------- Version 4.3.2 [v4-beta] (rgerhards), 2009-06-24 - removed long-obsoleted property UxTradMsg - added a generic network stream server (in addition to rather specific syslog tcp server) - added ability for the UDP output action to rebind its send socket after sending n messages. New config directive $ActionSendUDPRebindInterval added for the purpose. By default, rebinding is disabled. This is considered useful for load balancers. - bugfix: imdiag/imtcp had a race condition - improved testbench (now much better code design and reuse) - added config switch --enable-testbench=no to turn off testbench --------------------------------------------------------------------------- Version 4.3.1 [DEVEL] (rgerhards), 2009-05-25 - added capability to run multiple tcp listeners (on different ports) - performance enhancement: imtcp calls parser no longer on input thread but rather inside on of the potentially many main msg queue worker threads (an enhancement scheduled for all input plugins where this is possible) - added $GenerateConfigGraph configuration command which can be used to generate nice-looking (and very informative) rsyslog configuration graphs. - added $ActionName configuration directive (currently only used for graph generation, but may find other uses) - improved doc * added (hopefully) easier to grasp queue explanation - improved testbench * added tests for queue disk-only mode (checks disk queue logic) - bugfix: light and full delay watermarks had invalid values, badly affecting performance for delayable inputs - build system improvements - thanks to Michael Biebl - added new testing module imdiag, which enables to talk to the rsyslog core at runtime. The current implementation is only a beginning, but can be expanded over time --------------------------------------------------------------------------- Version 4.3.0 [DEVEL] (rgerhards), 2009-04-17 - new feature: new output plugin omprog, which permits to start program and feed it (via its stdin) with syslog messages. If the program terminates, it is restarted. - improved internal handling of RainerScript functions, building the necessary plumbing to support more functions with decent runtime performance. This is also necessary towards the long-term goal of loadable library modules. - added new RainerScript function "tolower" - improved testbench * added tests for tcp-based reception * added tcp-load test (1000 connections, 20,000 messages) - added $MaxOpenFiles configuration directive - bugfix: solved potential memory leak in msg processing, could manifest itself in imtcp - bugfix: ompgsql did not detect problems in sql command execution this could cause loss of messages. The handling was correct if the connection broke, but not if there was a problem with statement execution. The most probable case for such a case would be invalid sql inside the template, and this is now much easier to diagnose. --------------------------------------------------------------------------- Version 4.2.0 [v4-stable] (rgerhards), 2009-06-23 - bugfix: light and full delay watermarks had invalid values, badly affecting performance for delayable inputs - imported all patches from 3.22.1 as of today (see below) - bugfix: compile problems in im3195 --------------------------------------------------------------------------- Version 4.1.7 [BETA] (rgerhards), 2009-04-22 - bugfix: $InputTCPMaxSessions config directive was accepted, but not honored. This resulted in a fixed upper limit of 200 connections. - bugfix: the default for $DirCreateMode was 0644, and as such wrong. It has now been changed to 0700. For some background, please see http://lists.adiscon.net/pipermail/rsyslog/2009-April/001986.html - bugfix: ompgsql did not detect problems in sql command execution this could cause loss of messages. The handling was correct if the connection broke, but not if there was a problem with statement execution. The most probable case for such a case would be invalid sql inside the template, and this is now much easier to diagnose. --------------------------------------------------------------------------- Version 4.1.6 [DEVEL] (rgerhards), 2009-04-07 - added new "csv" property replacer options to enable simple creation of CSV-formatted outputs (format from RFC4180 is used) - implemented function support in RainerScript. That means the engine parses and compile functions, as well as executes a few build-in ones. Dynamic loading and registration of functions is not yet supported - but we now have a good foundation to do that later on. - implemented the strlen() RainerScript function - added a template output module - added -T rsyslogd command line option, enables to specify a directory where to chroot() into on startup. This is NOT a security feature but introduced to support testing. Thus, -T does not make sure chroot() is used in a secure way. (may be removed later) - added omstdout module for testing purposes. Spits out all messages to stdout - no config option, no other features - added a parser testing suite (still needs to be extended, but a good start) - modified $ModLoad statement so that for modules whom's name starts with a dot, no path is prepended (this enables relative-pathes and should not break any valid current config) - fixed a bug that caused action retries not to work correctly situation was only cleared by a restart - bugfix: closed dynafile was potentially never written until another dynafile name was generated - potential loss of messages - improved omfile so that it properly suspends itself if there is an i/o or file name generation error. This enables it to be used with the full high availability features of rsyslog's engine - bugfix: fixed some segaults on Solaris, where vsprintf() does not check for NULL pointers - improved performance of regexp-based filters Thanks to Arnaud Cornet for providing the idea and initial patch. - added a new way how output plugins may be passed parameters. This is more effcient for some outputs. They new can receive fields not only as a single string but rather in an array where each string is seperated. - added (some) developer documentation for output plugin interface - bugfix: potential abort with DA queue after high watermark is reached There exists a race condition that can lead to a segfault. Thanks go to vbernetr, who performed the analysis and provided patch, which I only tweaked a very little bit. - bugfix: imtcp did incorrectly parse hostname/tag Thanks to Luis Fernando Muñoz Mejías for the patch. --------------------------------------------------------------------------- Version 4.1.5 [DEVEL] (rgerhards), 2009-03-11 - bugfix: parser did not correctly parse fields in UDP-received messages - added ERE support in filter conditions new comparison operation "ereregex" - added new config directive $RepeatedMsgContainsOriginalMsg so that the "last message repeated n times" messages, if generated, may have an alternate format that contains the message that is being repeated --------------------------------------------------------------------------- Version 4.1.4 [DEVEL] (rgerhards), 2009-01-29 - bugfix: inconsistent use of mutex/atomic operations could cause segfault details are too many, for full analysis see blog post at: http://blog.gerhards.net/2009/01/rsyslog-data-race-analysis.html - bugfix: unitialized mutex was used in msg.c:getPRI This was subtle, because getPRI is called as part of the debugging code (always executed) in syslogd.c:logmsg. - bufgix: $PreserveFQDN was not properly handled for locally emitted messages --------------------------------------------------------------------------- Version 4.1.3 [DEVEL] (rgerhards), 2008-12-17 - added $InputTCPServerAddtlFrameDelimiter config directive, which enables to specify an additional, non-standard message delimiter for processing plain tcp syslog. This is primarily a fix for the invalid framing used in Juniper's NetScreen products. Credit to forum user Arv for suggesting this solution. - added $InputTCPServerInputName property, which enables a name to be specified that will be available during message processing in the inputname property. This is considered useful for logic that treats messages differently depending on which input received them. - added $PreserveFQDN config file directive Enables to use FQDNs in sender names where the legacy default would have stripped the domain part. Thanks to BlinkMind, Inc. http://www.blinkmind.com for sponsoring this development. - bugfix: imudp went into an endless loop under some circumstances (but could also leave it under some other circumstances...) Thanks to David Lang and speedfox for reporting this issue. --------------------------------------------------------------------------- Version 4.1.2 [DEVEL] (rgerhards), 2008-12-04 - bugfix: code did not compile without zlib - security bugfix: $AllowedSender was not honored, all senders were permitted instead (see http://www.rsyslog.com/Article322.phtml) - security fix: imudp emitted a message when a non-permitted sender tried to send a message to it. This behaviour is operator-configurable. If enabled, a message was emitted each time. That way an attacker could effectively fill the disk via this facility. The message is now emitted only once in a minute (this currently is a hard-coded limit, if someone comes up with a good reason to make it configurable, we will probably do that). - doc bugfix: typo in v3 compatibility document directive syntax thanks to Andrej for reporting - imported other changes from 3.21.8 and 3.20.1 (see there) --------------------------------------------------------------------------- Version 4.1.1 [DEVEL] (rgerhards), 2008-11-26 - added $PrivDropToGroup, $PrivDropToUser, $PrivDropToGroupID, $PrivDropToUserID config directives to enable dropping privileges. This is an effort to provide a security enhancement. For the limits of this approach, see http://wiki.rsyslog.com/index.php/Security - re-enabled imklog to compile on FreeBSD (brought in from beta) --------------------------------------------------------------------------- Version 4.1.0 [DEVEL] (rgerhards), 2008-11-18 ********************************* WARNING ********************************* This version has a slightly different on-disk format for message entries. As a consequence, old queue files being read by this version may have an invalid output timestamp, which could result to some malfunction inside the output driver. It is recommended to drain queues with the previous version before switching to this one. ********************************* WARNING ********************************* - greatly enhanced performance when compared to v3. - added configuration directive "HUPisRestart" which enables to configure HUP to be either a full restart or "just" a leightweight way to close open files. - enhanced legacy syslog parser to detect year if part of the timestamp the format is based on what Cisco devices seem to emit. - added a setting "$OptimizeForUniprocessor" to enable users to turn off pthread_yield calls which are counter-productive on multiprocessor machines (but have been shown to be useful on uniprocessors) - reordered imudp processing. Message parsing is now done as part of main message queue worker processing (was part of the input thread) This should also improve performance, as potentially more work is done in parallel. - bugfix: compressed syslog messages could be slightly mis-uncompressed if the last byte of the compressed record was a NUL - added $UDPServerTimeRequery option which enables to work with less acurate timestamps in favor of performance. This enables querying of the time only every n-th time if imudp is running in the tight receive loop (aka receiving messsages at a high rate) - doc bugfix: queue doc had wrong parameter name for setting controlling worker thread shutdown period - restructured rsyslog.conf documentation - bugfix: memory leak in ompgsql Thanks to Ken for providing the patch --------------------------------------------------------------------------- Version 3.22.4 [v3-stable] (rgerhards), 2010-??-?? - bugfix: action resume interval incorrectly handled, thus took longer to resume - bugfix: cosmetic: proper constant used instead of number in open call - bugfix: timestamp was incorrectly calculated for timezones with minute offset closes: http://bugzilla.adiscon.com/show_bug.cgi?id=271 - improved some code based on clang static analyzer results - bugfix: potential misadressing in property replacer - bugfix: improper handling of invalid PRI values references: CVE-2014-3634 --------------------------------------------------------------------------- Version 3.22.3 [v3-stable] (rgerhards), 2010-11-24 - bugfix(important): problem in TLS handling could cause rsyslog to loop in a tight loop, effectively disabling functionality and bearing the risk of unresponsiveness of the whole system. Bug tracker: http://bugzilla.adiscon.com/show_bug.cgi?id=194 --------------------------------------------------------------------------- Version 3.22.2 [v3-stable] (rgerhards), 2010-08-05 - bugfix: comment char ('#') in literal terminated script parsing and thus could not be used. but tracker: http://bugzilla.adiscon.com/show_bug.cgi?id=119 - enhance: imrelp now also provides remote peer's IP address [if librelp != 1.0.0 is used] - bugfix: sending syslog messages with zip compression did not work - bugfix: potential hang condition on queue shutdown - bugfix: segfault on startup when -q or -Q option was given bug tracker: http://bugzilla.adiscon.com/show_bug.cgi?id=157 Thanks to Jonas Nogueira for reporting this bug. - clarified use of $ActionsSendStreamDriver[AuthMode/PermittedPeers] in doc set (require TLS drivers) - bugfix: $CreateDirs variable not properly initialized, default thus was random (but most often "on") - bugfix: potential segfault when -p command line option was used thanks to varmojfekoj for pointing me at this bug - bugfix: programname filter in ! configuration can not be reset Thanks to Kiss Gabor for the patch. --------------------------------------------------------------------------- Version 3.22.1 [v3-stable] (rgerhards), 2009-07-02 - bugfix: invalid error message issued if $inlcudeConfig was on an empty set of files (e.g. *.conf, where none such files existed) thanks to Michael Biebl for reporting this bug - bugfix: when run in foreground (but not in debug mode), a debug message ("DoDie called") was emitted at shutdown. Removed. thanks to Michael Biebl for reporting this bug - bugfix: some garbagge was emitted to stderr on shutdown. This garbage consisted of file names, which were written during startup (key point: not a pointer error) thanks to Michael Biebl for reporting this bug - bugfix: startup and shutdown message were emitted to stdout thanks to Michael Biebl for reporting this bug - bugfix: error messages were not emitted to stderr in forked mode (stderr and stdo are now kept open across forks) - bugfix: internal messages were emitted to whatever file had fd2 when rsyslogd ran in forked mode (as usual!) Thanks to varmojfekoj for the patch - small enhancement: config validation run now exits with code 1 if an error is detected. This change is considered important but small enough to apply it directly to the stable version. [But it is a border case, the change requires more code than I had hoped. Thus I have NOT tried to actually catch all cases, this is left for the current devel releases, if necessary] - bugfix: light and full delay watermarks had invalid values, badly affecting performance for delayable inputs - bugfix: potential segfault issue when multiple $UDPServerRun directives are specified. Thanks to Michael Biebl for helping to debug this one. - relaxed GnuTLS version requirement to 1.4.0 after confirmation from the field that this version is sufficient - bugfix: parser did not properly handle empty structured data - bugfix: invalid mutex release in msg.c (detected under thread debugger, seems not to have any impact on actual deployments) --------------------------------------------------------------------------- Version 3.22.0 [v3-stable] (rgerhards), 2009-04-21 This is the first stable release that includes the full functionality of the 3.21.x version tree. - bugfix: $InputTCPMaxSessions config directive was accepted, but not honored. This resulted in a fixed upper limit of 200 connections. - bugfix: the default for $DirCreateMode was 0644, and as such wrong. It has now been changed to 0700. For some background, please see http://lists.adiscon.net/pipermail/rsyslog/2009-April/001986.html - bugfix: ompgsql did not detect problems in sql command execution this could cause loss of messages. The handling was correct if the connection broke, but not if there was a problem with statement execution. The most probable case for such a case would be invalid sql inside the template, and this is now much easier to diagnose. --------------------------------------------------------------------------- Version 3.21.11 [BETA] (rgerhards), 2009-04-03 - build system improvements contributed by Michael Biebl - thx! - all patches from 3.20.5 incorporated (see it's ChangeLog entry) --------------------------------------------------------------------------- Version 3.21.10 [BETA] (rgerhards), 2009-02-02 - bugfix: inconsistent use of mutex/atomic operations could cause segfault details are too many, for full analysis see blog post at: http://blog.gerhards.net/2009/01/rsyslog-data-race-analysis.html - the string "Do Die" was accidently emited upon exit in non-debug mode This has now been corrected. Thanks to varmojfekoj for the patch. - some legacy options were not correctly processed. Thanks to varmojfekoj for the patch. - doc bugfix: v3-compatiblity document had typo in config directive thanks to Andrej for reporting this --------------------------------------------------------------------------- Version 3.21.9 [BETA] (rgerhards), 2008-12-04 - re-release of 3.21.8 with an additional fix, that could also lead to DoS; 3.21.8 has been removed from the official download archives - security fix: imudp emitted a message when a non-permitted sender tried to send a message to it. This behaviour is operator-configurable. If enabled, a message was emitted each time. That way an attacker could effectively fill the disk via this facility. The message is now emitted only once in a minute (this currently is a hard-coded limit, if someone comes up with a good reason to make it configurable, we will probably do that). --------------------------------------------------------------------------- Version 3.21.8 [BETA] (rgerhards), 2008-12-04 - bugfix: imklog did not compile on FreeBSD - security bugfix: $AllowedSender was not honored, all senders were permitted instead (see http://www.rsyslog.com/Article322.phtml) - merged in all other changes from 3.20.1 (see there) --------------------------------------------------------------------------- Version 3.21.7 [BETA] (rgerhards), 2008-11-11 - this is the new beta branch, based on the former 3.21.6 devel - new functionality: ZERO property replacer nomatch option (from v3-stable) --------------------------------------------------------------------------- Version 3.21.6 [DEVEL] (rgerhards), 2008-10-22 - consolidated time calls during msg object creation, improves performance and consistency - bugfix: solved a segfault condition - bugfix: subsecond time properties generated by imfile, imklog and internal messages could be slightly inconsistent - bugfix: (potentially big) memory leak on HUP if queues could not be drained before timeout - thanks to David Lang for pointing this out - added capability to support multiple module search pathes. Thank to Marius Tomaschewski for providing the patch. - bugfix: im3195 did no longer compile - improved "make distcheck" by ensuring everything relevant is recompiled --------------------------------------------------------------------------- Version 3.21.5 [DEVEL] (rgerhards), 2008-09-30 - performance optimization: unnecessary time() calls during message parsing removed - thanks to David Lang for his excellent performance analysis - added new capability to property replacer: multiple immediately successive field delimiters are treated as a single one. Thanks to Zhuang Yuyao for the patch. - added message property "inputname", which contains the name of the input (module) that generated it. Presence is depending on suport in each input module (else it is blank). - added system property "$myhostname", which contains the name of the local host as it knows itself. - imported a number of fixes and enhancements from the stable and devel branches, including a fix to a potential segfault on HUP when using UDP listners - re-enabled gcc builtin atomic operations and added a proper ./configure check - bugfix: potential race condition when adding messages to queue There was a wrong order of mutex lock operations. It is hard to believe that really caused problems, but in theory it could and with threading we often see that theory becomes practice if something is only used long enough on a fast enough machine with enough CPUs ;) - cleaned up internal debug system code and made it behave better in regard to multi-threading --------------------------------------------------------------------------- Version 3.21.4 [DEVEL] (rgerhards), 2008-09-04 - removed compile time fixed message size limit (was 2K), limit can now be set via $MaxMessageSize global config directive (finally gotten rid of MAXLINE ;)) - enhanced doc for $ActionExecOnlyEveryNthTimeTimeout - integrated a number of patches from 3.18.4, namely - bugfix: order-of magnitude issue with base-10 size definitions in config file parser. Could lead to invalid sizes, constraints etc for e.g. queue files and any other object whose size was specified in base-10 entities. Did not apply to binary entities. Thanks to RB for finding this bug and providing a patch. - bugfix: action was not called when system time was set backwards (until the previous time was reached again). There are still some side-effects when time is rolled back (A time rollback is really a bad thing to do, ideally the OS should issue pseudo time (like NetWare did) when the user tries to roll back time). Thanks to varmojfekoj for this patch. - doc bugfix: rsyslog.conf man page improved and minor nit fixed thanks to Lukas Kuklinek for the patch. --------------------------------------------------------------------------- Version 3.21.3 [DEVEL] (rgerhards), 2008-08-13 - added ability to specify flow control mode for imuxsock - added ability to execute actions only after the n-th call of the action This also lead to the addition of two new config directives: $ActionExecOnlyEveryNthTime and $ActionExecOnlyEveryNthTimeTimeout This feature is useful, for example, for alerting: it permits you to send an alert only after at least n occurences of a specific message have been seen by rsyslogd. This protectes against false positives due to waiting for additional confirmation. - bugfix: IPv6 addresses could not be specified in forwarding actions New syntax @[addr]:port introduced to enable that. Root problem was IPv6 addresses contain colons. - somewhat enhanced debugging messages - imported from 3.18.3: - enhanced ommysql to support custom port to connect to server Port can be set via new $ActionOmmysqlServerPort config directive Note: this was a very minor change and thus deemed appropriate to be done in the stable release. - bugfix: misspelled config directive, previously was $MainMsgQueueWorkeTimeoutrThreadShutdown, is now $MainMsgQueueWorkerTimeoutThreadShutdown. Note that the misspelled directive is not preserved - if the misspelled directive was used (which I consider highly unlikely), the config file must be changed. Thanks to lperr for reporting the bug. --------------------------------------------------------------------------- Version 3.21.2 [DEVEL] (rgerhards), 2008-08-04 - added $InputUnixListenSocketHostName config directive, which permits to override the hostname being used on a local unix socket. This is useful for differentiating "hosts" running in several jails. Feature was suggested by David Darville, thanks for the suggestion. - enhanced ommail to support multiple email recipients. This is done by specifying $ActionMailTo multiple times. Note that this introduces a small incompatibility to previous config file syntax: the recipient list is now reset for each action (we honestly believe that will not cause any problem - apologies if it does). - enhanced troubleshooting documentation --------------------------------------------------------------------------- Version 3.21.1 [DEVEL] (rgerhards), 2008-07-30 - bugfix: no error was reported if the target of a $IncludeConfig could not be accessed. - added testbed for common config errors - added doc for -u option to rsyslogd man page - enhanced config file checking - no active actions are detected - added -N rsyslogd command line option for a config validation run (which does not execute actual syslogd code and does not interfere with a running instance) - somewhat improved emergency configuration. It is now also selected if the config contains no active actions - rsyslogd error messages are now reported to stderr by default. can be turned off by the new "$ErrorMessagesToStderr off" directive Thanks to HKS for suggesting the new features. --------------------------------------------------------------------------- Version 3.21.0 [DEVEL] (rgerhards), 2008-07-18 - starts a new devel branch - added a generic test driver for RainerScript plus some test cases to the testbench - added a small diagnostic tool to obtain result of gethostname() API - imported all changes from 3.18.1 until today (some quite important, see below) --------------------------------------------------------------------------- Version 3.20.6 [v3-stable] (rgerhards), 2009-04-16 - this is the last v3-stable for the 3.20.x series - bugfix: $InputTCPMaxSessions config directive was accepted, but not honored. This resulted in a fixed upper limit of 200 connections. - bugfix: the default for $DirCreateMode was 0644, and as such wrong. It has now been changed to 0700. For some background, please see http://lists.adiscon.net/pipermail/rsyslog/2009-April/001986.html --------------------------------------------------------------------------- Version 3.20.5 [v3-stable] (rgerhards), 2009-04-02 - bugfix: potential abort with DA queue after high watermark is reached There exists a race condition that can lead to a segfault. Thanks go to vbernetr, who performed the analysis and provided patch, which I only tweaked a very little bit. - fixed bugs in RainerScript: o when converting a number and a string to a common type, both were actually converted to the other variable's type. o the value of rsCStrConvertToNumber() was miscalculated. Thanks to varmojfekoj for the patch - fixed a bug in configure.ac which resulted in problems with environment detection - thanks to Michael Biebl for the patch - fixed a potential segfault problem in gssapi code thanks to varmojfekoj for the patch - doc enhance: provide standard template for MySQL module and instructions on how to modify schema --------------------------------------------------------------------------- Version 3.20.4 [v3-stable] (rgerhards), 2009-02-09 - bugfix: inconsistent use of mutex/atomic operations could cause segfault details are too many, for full analysis see blog post at: http://blog.gerhards.net/2009/01/rsyslog-data-race-analysis.html - bugfix: invalid ./configure settings for RFC3195 thanks to Michael Biebl for the patch - bugfix: invalid mutex access in msg.c - doc bugfix: dist tarball missed 2 files, had one extra file that no longer belongs into it. Thanks to Michael Biebl for pointing this out. --------------------------------------------------------------------------- Version 3.20.3 [v3-stable] (rgerhards), 2009-01-19 - doc bugfix: v3-compatiblity document had typo in config directive thanks to Andrej for reporting this - fixed a potential segfault condition with $AllowedSender directive On HUP, the root pointers were not properly cleaned up. Thanks to Michael Biebl, olgoat, and Juha Koho for reporting and analyzing the bug. --------------------------------------------------------------------------- Version 3.20.2 [v3-stable] (rgerhards), 2008-12-04 - re-release of 3.20.1 with an additional fix, that could also lead to DoS; 3.20.1 has been removed from the official download archives - security fix: imudp emitted a message when a non-permitted sender tried to send a message to it. This behaviour is operator-configurable. If enabled, a message was emitted each time. That way an attacker could effectively fill the disk via this facility. The message is now emitted only once in a minute (this currently is a hard-coded limit, if someone comes up with a good reason to make it configurable, we will probably do that). --------------------------------------------------------------------------- Version 3.20.1 [v3-stable] (rgerhards), 2008-12-04 - security bugfix: $AllowedSender was not honored, all senders were permitted instead - enhance: regex nomatch option "ZERO" has been added This allows to return the string 0 if a regular expression is not found. This is probably useful for storing numerical values into database columns. - bugfix: memory leak in gtls netstream driver fixed memory was lost each time a TLS session was torn down. This could result in a considerable memory leak if it happened quite frequently (potential system crash condition) - doc update: documented how to specify multiple property replacer options + link to new online regex generator tool added - minor bufgfix: very small memory leak in gtls netstream driver around a handful of bytes (< 20) for each HUP - improved debug output for regular expressions inside property replacer RE's seem to be a big trouble spot and I would like to have more information inside the debug log. So I decided to add some additional debug strings permanently. --------------------------------------------------------------------------- Version 3.20.0 [v3-stable] (rgerhards), 2008-11-05 - this is the inital release of the 3.19.x branch as a stable release - bugfix: double-free in pctp netstream driver. Thank to varmojfeko for the patch --------------------------------------------------------------------------- Version 3.19.12 [BETA] (rgerhards), 2008-10-16 - bugfix: subseconds where not correctly extracted from a timestamp if that timestamp did not contain any subsecond information (the resulting string was garbagge but should have been "0", what it now is). - increased maximum size of a configuration statement to 4K (was 1K) - imported all fixes from the stable branch (quite a lot) - bugfix: (potentially big) memory leak on HUP if queues could not be drained before timeout - thanks to David Lang for pointing this out --------------------------------------------------------------------------- Version 3.19.11 [BETA] (rgerhards), 2008-08-25 This is a refresh of the beta. No beta-specific fixes have been added. - included fixes from v3-stable (most importantly 3.18.3) --------------------------------------------------------------------------- Version 3.19.10 [BETA] (rgerhards), 2008-07-15 - start of a new beta branch based on former 3.19 devel branch - bugfix: bad memory leak in disk-based queue modes - bugfix: UDP syslog forwarding did not work on all platforms the ai_socktype was incorrectly set to 1. On some platforms, this lead to failing name resolution (e.g. FreeBSD 7). Thanks to HKS for reporting the bug. - bugfix: priority was incorrectly calculated on FreeBSD 7, because the LOG_MAKEPRI() C macro has a different meaning there (it is just a simple addition of faciltity and severity). I have changed this to use own, consistent, code for PRI calculation. Thank to HKS for reporting this bug. - bugfix (cosmetical): authorization was not checked when gtls handshake completed immediately. While this sounds scary, the situation can not happen in practice. We use non-blocking IO only for server-based gtls session setup. As TLS requires the exchange of multiple frames before the handshake completes, it simply is impossible to do this in one step. However, it is useful to have the code path correct even for this case - otherwise, we may run into problems if the code is changed some time later (e.g. to use blocking sockets). Thanks to varmojfekoj for providing the patch. - important queue bugfix from 3.18.1 imported (see below) - cleanup of some debug messages --------------------------------------------------------------------------- Version 3.19.9 (rgerhards), 2008-07-07 - added tutorial for creating a TLS-secured syslog infrastructure - rewritten omusrmsg to no longer fork() a new process for sending messages this caused some problems with the threading model, e.g. zombies. Also, it was far less optimal than it is now. - bugfix: machine certificate was required for client even in TLS anon mode Reference: http://bugzilla.adiscon.com/show_bug.cgi?id=85 The fix also slightly improves performance by not storing certificates in client sessions when there is no need to do so. - bugfix: RainerScript syntax error was not always detected --------------------------------------------------------------------------- Version 3.19.8 (rgerhards), 2008-07-01 - bugfix: gtls module did not correctly handle EGAIN (and similar) recv() states. This has been fixed by introducing a new abstraction layer inside gtls. - added (internal) error codes to error messages; added redirector to web description of error codes closes bug http://bugzilla.adiscon.com/show_bug.cgi?id=20 - disabled compile warnings caused by third-party libraries - reduced number of compile warnings in gcc's -pedantic mode - some minor documentation improvements - included all fixes from beta 3.17.5 --------------------------------------------------------------------------- Version 3.19.7 (rgerhards), 2008-06-11 - added new property replacer option "date-subseconds" that enables to query just the subsecond part of a high-precision timestamp - somewhat improved plain tcp syslog reliability by doing a connection check before sending. Credits to Martin Schuette for providing the idea. Details are available at http://blog.gerhards.net/2008/06/reliable-plain-tcp-syslog-once-again.html - made rsyslog tickless in the (usual and default) case that repeated message reduction is turned off. More info: http://blog.gerhards.net/2008/06/coding-to-save-environment.html - some build system cleanup, thanks to Michael Biebl - bugfix: compile under (Free)BSD failed due to some invalid library definitions - this is fixed now. Thanks to Michael Biebl for the patch. --------------------------------------------------------------------------- Version 3.19.6 (rgerhards), 2008-06-06 - enhanced property replacer to support multiple regex matches - bugfix: part of permittedPeer structure was not correctly initialized thanks to varmojfekoj for spotting this - bugfix: off-by-one bug during certificate check - bugfix: removed some memory leaks in TLS code --------------------------------------------------------------------------- Version 3.19.5 (rgerhards), 2008-05-30 - enabled Posix ERE expressions inside the property replacer (previously BRE was permitted only) - provided ability to specify that a regular expression submatch shall be used inside the property replacer - implemented in property replacer: if a regular expression does not match, it can now either return "**NO MATCH** (default, as before), a blank property or the full original property text - enhanced property replacer to support multiple regex matches --------------------------------------------------------------------------- Version 3.19.4 (rgerhards), 2008-05-27 - implemented x509/certvalid gtls auth mode - implemented x509/name gtls auth mode (including wildcards) - changed fingerprint gtls auth mode to new format fingerprint - protected gtls error string function by a mutex. Without it, we could have a race condition in extreme cases. This was very remote, but now can no longer happen. - changed config directive name to reflect different use $ActionSendStreamDriverCertFingerprint is now $ActionSendStreamDriverPermittedPeer and can be used both for fingerprint and name authentication (similar to the input side) - bugfix: sender information (fromhost et al) was missing in imudp thanks to sandiso for reporting this bug - this release fully inplements IETF's syslog-transport-tls-12 plus the latest text changes Joe Salowey provided via email. Not included is ipAddress subjectAltName authentication, which I think will be dropped from the draft. I don't think there is any real need for it. This release also includes all bug fix up to today from the beta and stable branches. Most importantly, this means the bugfix for 100% CPU utilization by imklog. --------------------------------------------------------------------------- Version 3.19.3 (rgerhards), 2008-05-21 - added ability to authenticate the server against its certificate fingerprint - added ability for client to provide its fingerprint - added ability for server to obtain client cert's fingerprint - bugfix: small mem leak in omfwd on exit (strmdriver name was not freed) - bugfix: $ActionSendStreamDriver had no effect - bugfix: default syslog port was no longer used if none was configured. Thanks to varmojfekoj for the patch - bugfix: missing linker options caused build to fail on some systems. Thanks to Tiziano Mueller for the patch. --------------------------------------------------------------------------- Version 3.19.2 (rgerhards), 2008-05-16 - bugfix: TCP input modules did incorrectly set fromhost property (always blank) - bugfix: imklog did not set fromhost property - added "fromhost-ip" property Note that adding this property changes the on-disk format for messages. However, that should not have any bad effect on existing spool files. But you will run into trouble if you create a spool file with this version and then try to process it with an older one (after a downgrade). Don't do that ;) - added "RSYSLOG_DebugFormat" canned template - bugfix: hostname and fromhost were swapped when a persisted message (in queued mode) was read in - bugfix: lmtcpclt, lmtcpsrv and lmgssutil did all link to the static runtime library, resulting in a large size increase (and potential "interesting" effects). Thanks to Michael Biebl for reporting the size issue. - bugfix: TLS server went into an endless loop in some situations. Thanks to Michael Biebl for reporting the problem. - fixed potential segfault due to invalid call to cfsysline thanks to varmojfekoj for the patch --------------------------------------------------------------------------- Version 3.19.1 (rgerhards), 2008-05-07 - configure help for --enable-gnutls wrong - said default is "yes" but default actually is "no" - thanks to darix for pointing this out - file dirty.h was missing - thanks to darix for pointing this out - bugfix: man files were not properly distributed - thanks to darix for reporting and to Michael Biebl for help with the fix - some minor cleanup --------------------------------------------------------------------------- Version 3.19.0 (rgerhards), 2008-05-06 - begins new devel branch version - implemented TLS for plain tcp syslog (this is also the world's first implementation of IETF's upcoming syslog-transport-tls draft) - partly rewritten and improved omfwd among others, now loads TCP code only if this is actually necessary - split of a "runtime library" for rsyslog - this is not yet a clean model, because some modularization is still outstanding. In theory, this shall enable other utilities but rsyslogd to use the same runtime - implemented im3195, the RFC3195 input as a plugin - changed directory structure, files are now better organized - a lot of cleanup in regard to modularization - -c option no longer must be the first option - thanks to varmjofekoj for the patch --------------------------------------------------------------------------- Version 3.18.7 (rgerhards), 2008-12-?? - bugfix: the default for $DirCreateMode was 0644, and as such wrong. It has now been changed to 0700. For some background, please see http://lists.adiscon.net/pipermail/rsyslog/2009-April/001986.html - fixed a potential segfault condition with $AllowedSender directive On HUP, the root pointers were not properly cleaned up. Thanks to Michael Biebl, olgoat, and Juha Koho for reporting and analyzing the bug. - some legacy options were not correctly processed. Thanks to varmojfekoj for the patch. - doc bugfix: some spelling errors in man pages corrected. Thanks to Geoff Simmons for the patch. --------------------------------------------------------------------------- Version 3.18.6 (rgerhards), 2008-12-08 - security bugfix: $AllowedSender was not honored, all senders were permitted instead (see http://www.rsyslog.com/Article322.phtml) (backport from v3-stable, v3.20.9) - minor bugfix: dual close() call on tcp session closure --------------------------------------------------------------------------- Version 3.18.5 (rgerhards), 2008-10-09 - bugfix: imudp input module could cause segfault on HUP It did not properly de-init a variable acting as a linked list head. That resulted in trying to access freed memory blocks after the HUP. - bugfix: rsyslogd could hang on HUP because getnameinfo() is not cancel-safe, but was not guarded against being cancelled. pthread_cancel() is routinely being called during HUP processing. - bugfix[minor]: if queue size reached light_delay mark, enqueuing could potentially be blocked for a longer period of time, which was not the behaviour desired. - doc bugfix: $ActionExecOnlyWhenPreviousIsSuspended was still misspelled as $...OnlyIfPrev... in some parts of the documentation. Thanks to Lorenzo M. Catucci for reporting this bug. - added doc on malformed messages, cause and how to work-around, to the doc set - added doc on how to build from source repository --------------------------------------------------------------------------- Version 3.18.4 (rgerhards), 2008-09-18 - bugfix: order-of magnitude issue with base-10 size definitions in config file parser. Could lead to invalid sizes, constraints etc for e.g. queue files and any other object whose size was specified in base-10 entities. Did not apply to binary entities. Thanks to RB for finding this bug and providing a patch. - bugfix: action was not called when system time was set backwards (until the previous time was reached again). There are still some side-effects when time is rolled back (A time rollback is really a bad thing to do, ideally the OS should issue pseudo time (like NetWare did) when the user tries to roll back time). Thanks to varmojfekoj for this patch. - doc bugfix: rsyslog.conf man page improved and minor nit fixed thanks to Lukas Kuklinek for the patch. - bugfix: error code -2025 was used for two different errors. queue full is now -2074 and -2025 is unique again. (did cause no real problem except for troubleshooting) - bugfix: default discard severity was incorrectly set to 4, which lead to discard-on-queue-full to be enabled by default. That could cause message loss where non was expected. The default has now been changed to the correct value of 8, which disables the functionality. This problem applied both to the main message queue and the action queues. Thanks to Raoul Bhatia for pointing out this problem. - bugfix: option value for legacy -a option could not be specified, resulting in strange operations. Thanks to Marius Tomaschewski for the patch. - bugfix: colon after date should be ignored, but was not. This has now been corrected. Required change to the internal ParseTIMESTAMP3164() interface. --------------------------------------------------------------------------- Version 3.18.3 (rgerhards), 2008-08-18 - bugfix: imfile could cause a segfault upon rsyslogd HUP and termination Thanks to lperr for an excellent bug report that helped detect this problem. - enhanced ommysql to support custom port to connect to server Port can be set via new $ActionOmmysqlServerPort config directive Note: this was a very minor change and thus deemed appropriate to be done in the stable release. - bugfix: misspelled config directive, previously was $MainMsgQueueWorkeTimeoutrThreadShutdown, is now $MainMsgQueueWorkerTimeoutThreadShutdown. Note that the misspelled directive is not preserved - if the misspelled directive was used (which I consider highly unlikely), the config file must be changed. Thanks to lperr for reporting the bug. - disabled flow control for imuxsock, as it could cause system hangs under some circumstances. The devel (3.21.3 and above) will re-enable it and provide enhanced configurability to overcome the problems if they occur. --------------------------------------------------------------------------- Version 3.18.2 (rgerhards), 2008-08-08 - merged in IPv6 forwarding address bugfix from v2-stable --------------------------------------------------------------------------- Version 3.18.1 (rgerhards), 2008-07-21 - bugfix: potential segfault in creating message mutex in non-direct queue mode. rsyslogd segfaults on freeeBSD 7.0 (an potentially other platforms) if an action queue is running in any other mode than non-direct. The same problem can potentially be triggered by some main message queue settings. In any case, it will manifest during rsylog's startup. It is unlikely to happen after a successful startup (the only window of exposure may be a relatively seldom executed action running in queued mode). This has been corrected. Thank to HKS for point out the problem. - bugfix: priority was incorrectly calculated on FreeBSD 7, because the LOG_MAKEPRI() C macro has a different meaning there (it is just a simple addition of faciltity and severity). I have changed this to use own, consistent, code for PRI calculation. [Backport from 3.19.10] - bugfix: remove PRI part from kernel message if it is present Thanks to Michael Biebl for reporting this bug - bugfix: mark messages were not correctly written to text log files the markmessageinterval was not correctly propagated to all places where it was needed. This resulted in rsyslog using the default (20 minutes) in some code pathes, what looked to the user like mark messages were never written. - added a new property replacer option "sp-if-no-1st-sp" to cover a problem with RFC 3164 based interpreation of tag separation. While it is a generic approach, it fixes a format problem introduced in 3.18.0, where kernel messages no longer had a space after the tag. This is done by a modifcation of the default templates. Please note that this may affect some messages where there intentionally is no space between the tag and the first character of the message content. If so, this needs to be worked around via a specific template. However, we consider this scenario to be quite remote and, even if it exists, it is not expected that it will actually cause problems with log parsers (instead, we assume the new default template behaviour may fix previous problems with log parsers due to the missing space). - bugfix: imklog module was not correctly compiled for GNU/kFreeBSD. Thanks to Petr Salinger for the patch - doc bugfix: property replacer options secpath-replace and secpath-drop were not documented - doc bugfix: fixed some typos in rsyslog.conf man page - fixed typo in source comment - thanks to Rio Fujita - some general cleanup (thanks to Michael Biebl) --------------------------------------------------------------------------- Version 3.18.0 (rgerhards), 2008-07-11 - begun a new v3-stable based on former 3.17.4 beta plus patches to previous v3-stable - bugfix in RainerScript: syntax error was not always detected --------------------------------------------------------------------------- Version 3.17.5 (rgerhards), 2008-06-27 - added doc: howto set up a reliable connection to remote server via queued mode (and plain tcp protocol) - bugfix: comments after actions were not properly treated. For some actions (e.g. forwarding), this could also lead to invalid configuration --------------------------------------------------------------------------- Version 3.17.4 (rgerhards), 2008-06-16 - changed default for $KlogSymbolLookup to "off". The directive is also scheduled for removal in a later version. This was necessary because on kernels >= 2.6, the kernel does the symbol lookup itself. The imklog lookup logic then breaks the log message and makes it unusable. --------------------------------------------------------------------------- Version 3.17.3 (rgerhards), 2008-05-28 - bugfix: imklog went into an endless loop if a PRI value was inside a kernel log message (unusual case under Linux, frequent under BSD) --------------------------------------------------------------------------- Version 3.17.2 (rgerhards), 2008-05-04 - this version is the new beta, based on 3.17.1 devel feature set - merged in imklog bug fix from v3-stable (3.16.1) --------------------------------------------------------------------------- Version 3.17.1 (rgerhards), 2008-04-15 - removed dependency on MAXHOSTNAMELEN as much as it made sense. GNU/Hurd does not define it (because it has no limit), and we have taken care for cases where it is undefined now. However, some very few places remain where IMHO it currently is not worth fixing the code. If it is not defined, we have used a generous value of 1K, which is above IETF RFC's on hostname length at all. The memory consumption is no issue, as there are only a handful of this buffers allocated *per run* -- that's also the main reason why we consider it not worth to be fixed any further. - enhanced legacy syslog parser to handle slightly malformed messages (with a space in front of the timestamp) - at least HP procurve is known to do that and I won't outrule that others also do it. The change looks quite unintrusive and so we added it to the parser. - implemented klogd functionality for BSD - implemented high precision timestamps for the kernel log. Thanks to Michael Biebl for pointing out that the kernel log did not have them. - provided ability to discard non-kernel messages if they are present in the kernel log (seems to happen on BSD) - implemented $KLogInternalMsgFacility config directive - implemented $KLogPermitNonKernelFacility config directive Plus a number of bugfixes that were applied to v3-stable and beta branches (not mentioned here in detail). --------------------------------------------------------------------------- Version 3.17.0 (rgerhards), 2008-04-08 - added native ability to send mail messages - removed no longer needed file relptuil.c/.h - added $ActionExecOnlyOnceEveryInterval config directive - bugfix: memory leaks in script engine - bugfix: zero-length strings were not supported in object deserializer - properties are now case-insensitive everywhere (script, filters, templates) - added the capability to specify a processing (actually dequeue) timeframe with queues - so things can be configured to be done at off-peak hours - We have removed the 32 character size limit (from RFC3164) on the tag. This had bad effects on existing envrionments, as sysklogd didn't obey it either (probably another bug in RFC3164...). We now receive the full size, but will modify the outputs so that only 32 characters max are used by default. If you need large tags in the output, you need to provide custom templates. - changed command line processing. -v, -M, -c options are now parsed and processed before all other options. Inter-option dependencies have been relieved. Among others, permits to specify intial module load path via -M only (not the environment) which makes it much easier to work with non-standard module library locations. Thanks to varmojfekoj for suggesting this change. Matches bugzilla bug 55. - bugfix: some messages were emited without hostname Plus a number of bugfixes that were applied to v3-stable and beta branches (not mentioned here in detail). --------------------------------------------------------------------------- Version 3.16.3 (rgerhards), 2008-07-11 - updated information on rsyslog packages - bugfix: memory leak in disk-based queue modes --------------------------------------------------------------------------- Version 3.16.2 (rgerhards), 2008-06-25 - fixed potential segfault due to invalid call to cfsysline thanks to varmojfekoj for the patch - bugfix: some whitespaces where incorrectly not ignored when parsing the config file. This is now corrected. Thanks to Michael Biebl for pointing out the problem. --------------------------------------------------------------------------- Version 3.16.1 (rgerhards), 2008-05-02 - fixed a bug in imklog which lead to startup problems (including segfault) on some platforms under some circumsances. Thanks to Vieri for reporting this bug and helping to troubleshoot it. --------------------------------------------------------------------------- Version 3.16.0 (rgerhards), 2008-04-24 - new v3-stable (3.16.x) based on beta 3.15.x (RELP support) - bugfix: omsnmp had a too-small sized buffer for hostname+port. This could not lead to a segfault, as snprintf() was used, but could cause some trouble with extensively long hostnames. - applied patch from Tiziano Müller to remove some compiler warnings - added gssapi overview/howto thanks to Peter Vrabec - changed some files to grant LGPLv3 extended persmissions on top of GPLv3 this also is the first sign of something that will evolve into a well-defined "rsyslog runtime library" --------------------------------------------------------------------------- Version 3.15.1 (rgerhards), 2008-04-11 - bugfix: some messages were emited without hostname - disabled atomic operations for the time being because they introduce some cross-platform trouble - need to see how to fix this in the best possible way - bugfix: zero-length strings were not supported in object deserializer - added librelp check via PKG_CHECK thanks to Michael Biebl's patch - file relputil.c deleted, is not actually needed - added more meaningful error messages to rsyslogd (when some errors happens during startup) - bugfix: memory leaks in script engine - bugfix: $hostname and $fromhost in RainerScript did not work This release also includes all changes applied to the stable versions up to today. --------------------------------------------------------------------------- Version 3.15.0 (rgerhards), 2008-04-01 - major new feature: imrelp/omrelp support reliable delivery of syslog messages via the RELP protocol and librelp (http://www.librelp.com). Plain tcp syslog, so far the best reliability solution, can lose messages when something goes wrong or a peer goes down. With RELP, this can no longer happen. See imrelp.html for more details. - bugfix: rsyslogd was no longer build by default; man pages are only installed if corresponding option is selected. Thanks to Michael Biebl for pointing these problems out. --------------------------------------------------------------------------- Version 3.14.2 (rgerhards), 2008-04-09 - bugfix: segfault with expression-based filters - bugfix: omsnmp did not deref errmsg object on exit (no bad effects caused) - some cleanup - bugfix: imklog did not work well with kernel 2.6+. Thanks to Peter Vrabec for patching it based on the development in sysklogd - and thanks to the sysklogd project for upgrading klogd to support the new functionality - some cleanup in imklog - bugfix: potential segfault in imklog when kernel is compiled without /proc/kallsyms and the file System.map is missing. Thanks to Andrea Morandi for pointing it out and suggesting a fix. - bugfixes, credits to varmojfekoj: * reset errno before printing a warning message * misspelled directive name in code processing legacy options - bugfix: some legacy options not correctly interpreted - thanks to varmojfekoj for the patch - improved detection of modules being loaded more than once thanks to varmojfekoj for the patch --------------------------------------------------------------------------- Version 3.14.1 (rgerhards), 2008-04-04 - bugfix: some messages were emited without hostname - bugfix: rsyslogd was no longer build by default; man pages are only installed if corresponding option is selected. Thanks to Michael Biebl for pointing these problems out. - bugfix: zero-length strings were not supported in object deserializer - disabled atomic operations for this stable build as it caused platform problems - bugfix: memory leaks in script engine - bugfix: $hostname and $fromhost in RainerScript did not work - bugfix: some memory leak when queue is runing in disk mode - man pages improved thanks to varmofekoj and Peter Vrabec - We have removed the 32 character size limit (from RFC3164) on the tag. This had bad effects on existing envrionments, as sysklogd didn't obey it either (probably another bug in RFC3164...). We now receive the full size, but will modify the outputs so that only 32 characters max are used by default. If you need large tags in the output, you need to provide custom templates. - bugfix: some memory leak when queue is runing in disk mode --------------------------------------------------------------------------- Version 3.14.0 (rgerhards), 2008-04-02 An interim version was accidently released to the web. It was named 3.14.0. To avoid confusion, we have not assigned this version number to any official release. If you happen to use 3.14.0, please update to 3.14.1. --------------------------------------------------------------------------- Version 3.13.0-dev0 (rgerhards), 2008-03-31 - bugfix: accidently set debug option in 3.12.5 reset to production This option prevented dlclose() to be called. It had no real bad effects, as the modules were otherwise correctly deinitialized and dlopen() supports multiple opens of the same module without any memory footprint. - removed --enable-mudflap, added --enable-valgrind ./configure setting - bugfix: tcp receiver could segfault due to uninitialized variable - docfix: queue doc had a wrong directive name that prevented max worker threads to be correctly set - worked a bit on atomic memory operations to support problem-free threading (only at non-intrusive places) - added a --enable/disable-rsyslogd configure option so that source-based packaging systems can build plugins without the need to compile rsyslogd - some cleanup - test of potential new version number scheme --------------------------------------------------------------------------- Version 3.12.5 (rgerhards), 2008-03-28 - changed default for "last message repeated n times", which is now off by default - implemented backward compatibility commandline option parsing - automatically generated compatibility config lines are now also logged so that a user can diagnose problems with them - added compatibility mode for -a, -o and -p options - compatibility mode processing finished - changed default file output format to include high-precision timestamps - added a buid-in template for previous syslogd file format - added new $ActionFileDefaultTemplate directive - added support for high-precision timestamps when receiving legacy syslog messages - added new $ActionForwardDefaultTemplate directive - added new $ActionGSSForwardDefaultTemplate directive - added build-in templates for easier configuration - bugfix: fixed small memory leak in tcpclt.c - bugfix: fixed small memory leak in template regular expressions - bugfix: regular expressions inside property replacer did not work properly - bugfix: QHOUR and HHOUR properties were wrongly calculated - bugfix: fixed memory leaks in stream class and imfile - bugfix: $ModDir did invalid bounds checking, potential overlow in dbgprintf() - thanks to varmojfekoj for the patch - bugfix: -t and -g legacy options max number of sessions had a wrong and much too high value --------------------------------------------------------------------------- Version 3.12.4 (rgerhards), 2008-03-25 - Greatly enhanced rsyslogd's file write performance by disabling file syncing capability of output modules by default. This feature is usually not required, not useful and an extreme performance hit (both to rsyslogd as well as the system at large). Unfortunately, most users enable it by default, because it was most intuitive to enable it in plain old sysklogd syslog.conf format. There is now the $ActionFileEnableSync config setting which must be enabled in order to support syncing. By default it is off. So even if the old-format config lines request syncing, it is not done unless explicitely enabled. I am sure this is a very useful change and not a risk at all. I need to think if I undo it under compatibility mode, but currently this does not happen (I fear a lot of lazy users will run rsyslogd in compatibility mode, again bringing up this performance problem...). - added flow control options to other input sources - added $HHOUR and $QHOUR system properties - can be used for half- and quarter-hour logfile rotation - changed queue's discard severities default value to 8 (do not discard) to prevent unintentional message loss - removed a no-longer needed callback from the output module interface. Results in reduced code complexity. - bugfix/doc: removed no longer supported -h option from man page - bugfix: imklog leaked several hundered KB on each HUP. Thanks to varmojfekoj for the patch - bugfix: potential segfault on module unload. Thanks to varmojfekoj for the patch - bugfix: fixed some minor memory leaks - bugfix: fixed some slightly invalid memory accesses - bugfix: internally generated messages had "FROMHOST" property not set --------------------------------------------------------------------------- Version 3.12.3 (rgerhards), 2008-03-18 - added advanced flow control for congestion cases (mode depending on message source and its capablity to be delayed without bad side effects) - bugfix: $ModDir should not be reset on $ResetConfig - this can cause a lot of confusion and there is no real good reason to do so. Also conflicts with the new -M option and environment setting. - bugfix: TCP and GSSAPI framing mode variable was uninitialized, leading to wrong framing (caused, among others, interop problems) - bugfix: TCP (and GSSAPI) octet-counted frame did not work correctly in all situations. If the header was split across two packet reads, it was invalidly processed, causing loss or modification of messages. - bugfix: memory leak in imfile - bugfix: duplicate public symbol in omfwd and omgssapi could lead to segfault. thanks to varmojfekoj for the patch. - bugfix: rsyslogd aborted on sigup - thanks to varmojfekoj for the patch - some more internal cleanup ;) - begun relp modules, but these are not functional yet - Greatly enhanced rsyslogd's file write performance by disabling file syncing capability of output modules by default. This feature is usually not required, not useful and an extreme performance hit (both to rsyslogd as well as the system at large). Unfortunately, most users enable it by default, because it was most intuitive to enable it in plain old sysklogd syslog.conf format. There is now a new config setting which must be enabled in order to support syncing. By default it is off. So even if the old-format config lines request syncing, it is not done unless explicitely enabled. I am sure this is a very useful change and not a risk at all. I need to think if I undo it under compatibility mode, but currently this does not happen (I fear a lot of lazy users will run rsyslogd in compatibility mode, again bringing up this performance problem...). --------------------------------------------------------------------------- Version 3.12.2 (rgerhards), 2008-03-13 - added RSYSLOGD_MODDIR environment variable - added -M rsyslogd option (allows to specify module directory location) - converted net.c into a loadable library plugin - bugfix: debug module now survives unload of loadable module when printing out function call data - bugfix: not properly initialized data could cause several segfaults if there were errors in the config file - thanks to varmojfekoj for the patch - bugfix: rsyslogd segfaulted when imfile read an empty line - thanks to Johnny Tan for an excellent bug report - implemented dynamic module unload capability (not visible to end user) - some more internal cleanup - bugfix: imgssapi segfaulted under some conditions; this fix is actually not just a fix but a change in the object model. Thanks to varmojfekoj for providing the bug report, an initial fix and lots of good discussion that lead to where we finally ended up. - improved session recovery when outbound tcp connection breaks, reduces probability of message loss at the price of a highly unlikely potential (single) message duplication --------------------------------------------------------------------------- Version 3.12.1 (rgerhards), 2008-03-06 - added library plugins, which can be automatically loaded - bugfix: actions were not correctly retried; caused message loss - changed module loader to automatically add ".so" suffix if not specified (over time, this shall also ease portability of config files) - improved debugging support; debug runtime options can now be set via an environment variable - bugfix: removed debugging code that I forgot to remove before releasing 3.12.0 (does not cause harm and happened only during startup) - added support for the MonitorWare syslog MIB to omsnmp - internal code improvements (more code converted into classes) - internal code reworking of the imtcp/imgssapi module - added capability to ignore client-provided timestamp on unix sockets and made this mode the default; this was needed, as some programs (e.g. sshd) log with inconsistent timezone information, what messes up the local logs (which by default don't even contain time zone information). This seems to be consistent with what sysklogd did for the past four years. Alternate behaviour may be desirable if gateway-like processes send messages via the local log slot - in this case, it can be enabled via the $InputUnixListenSocketIgnoreMsgTimestamp and $SystemLogSocketIgnoreMsgTimestamp config directives - added ability to compile on HP UX; verified that imudp worked on HP UX; however, we are still in need of people trying out rsyslogd on HP UX, so it can not yet be assumed it runs there - improved session recovery when outbound tcp connection breaks, reduces probability of message loss at the price of a highly unlikely potential (single) message duplication --------------------------------------------------------------------------- Version 3.12.0 (rgerhards), 2008-02-28 - added full expression support for filters; filters can now contain arbitrary complex boolean, string and arithmetic expressions --------------------------------------------------------------------------- Version 3.11.6 (rgerhards), 2008-02-27 - bugfix: gssapi libraries were still linked to rsyslog core, what should no longer be necessary. Applied fix by Michael Biebl to solve this. - enabled imgssapi to be loaded side-by-side with imtcp - added InputGSSServerPermitPlainTCP config directive - split imgssapi source code somewhat from imtcp - bugfix: queue cancel cleanup handler could be called with invalid pointer if dequeue failed - bugfix: rsyslogd segfaulted on second SIGHUP tracker: http://bugzilla.adiscon.com/show_bug.cgi?id=38 - improved stability of queue engine - bugfix: queue disk file were not properly persisted when immediately after closing an output file rsyslog was stopped or huped (the new output file open must NOT have happend at that point) - this lead to a sparse and invalid queue file which could cause several problems to the engine (unpredictable results). This situation should have happened only in very rare cases. tracker: http://bugzilla.adiscon.com/show_bug.cgi?id=40 - bugfix: during queue shutdown, an assert invalidly triggered when the primary queue's DA worker was terminated while the DA queue's regular worker was still executing. This could result in a segfault during shutdown. tracker: http://bugzilla.adiscon.com/show_bug.cgi?id=41 - bugfix: queue properties sizeOnDisk, bytesRead were persisted to disk with wrong data type (long instead of int64) - could cause problems on 32 bit machines - bugfix: queue aborted when it was shut down, DA-enabled, DA mode was just initiated but not fully initialized (a race condition) - bugfix: imfile could abort under extreme stress conditions (when it was terminated before it could open all of its to be monitored files) - applied patch from varmojfekoj to fix an issue with compatibility mode and default module directories (many thanks!): I've also noticed a bug in the compatibility code; the problem is that options are parsed before configuration file so options which need a module to be loaded will currently ignore any $moddir directive. This can be fixed by moving legacyOptsHook() after config file parsing. (see the attached patch) This goes against the logical order of processing, but the legacy options are only few and it doesn't seem to be a problem. - bugfix: object property deserializer did not handle negative numbers --------------------------------------------------------------------------- Version 3.11.5 (rgerhards), 2008-02-25 - new imgssapi module, changed imtcp module - this enables to load/package GSSAPI support separately - thanks to varmojfekoj for the patch - compatibility mode (the -c option series) is now at least partly completed - thanks to varmojfekoj for the patch - documentation for imgssapi and imtcp added - duplicate $ModLoad's for the same module are now detected and rejected -- thanks to varmojfekoj for the patch --------------------------------------------------------------------------- Version 3.11.4 (rgerhards), 2008-02-21 - bugfix: debug.html was missing from release tarball - thanks to Michael Biebl for bringing this to my attention - some internal cleanup on the stringbuf object calling interface - general code cleanup and further modularization - $MainMessageQueueDiscardSeverity can now also handle textual severities (previously only integers) - bugfix: message object was not properly synchronized when the main queue had a single thread and non-direct action queues were used - some documentation improvements --------------------------------------------------------------------------- Version 3.11.3 (rgerhards), 2008-02-18 - fixed a bug in imklog which lead to duplicate message content in kernel logs - added support for better plugin handling in libdbi (we contributed a patch to do that, we just now need to wait for the next libdbi version) - bugfix: fixed abort when invalid template was provided to an action bug http://bugzilla.adiscon.com/show_bug.cgi?id=4 - re-instantiated SIGUSR1 function; added SIGUSR2 to generate debug status output - added some documentation on runtime-debug settings - slightly improved man pages for novice users --------------------------------------------------------------------------- Version 3.11.2 (rgerhards), 2008-02-15 - added the capability to monitor text files and process their content as syslog messages (including forwarding) - added support for libdbi, a database abstraction layer. rsyslog now also supports the following databases via dbi drivers: * Firebird/Interbase * FreeTDS (access to MS SQL Server and Sybase) * SQLite/SQLite3 * Ingres (experimental) * mSQL (experimental) * Oracle (experimental) Additional drivers may be provided by the libdbi-drivers project, which can be used by rsyslog as soon as they become available. - removed some left-over unnecessary dbgprintf's (cluttered screen, cosmetic) - doc bugfix: html documentation for omsnmp was missing --------------------------------------------------------------------------- Version 3.11.1 (rgerhards), 2008-02-12 - SNMP trap sender added thanks to Andre Lorbach (omsnmp) - added input-plugin interface specification in form of a (copy) template input module - applied documentation fix by Michael Biebl -- many thanks! - bugfix: immark did not have MARK flags set... - added x-info field to rsyslogd startup/shutdown message. Hopefully points users to right location for further info (many don't even know they run rsyslog ;)) - bugfix: trailing ":" of tag was lost while parsing legacy syslog messages without timestamp - thanks to Anders Blomdell for providing a patch! - fixed a bug in stringbuf.c related to STRINGBUF_TRIM_ALLOCSIZE, which wasn't supposed to be used with rsyslog. Put a warning message up that tells this feature is not tested and probably not worth the effort. Thanks to Anders Blomdell fro bringing this to our attention - somewhat improved performance of string buffers - fixed bug that caused invalid treatment of tabs (HT) in rsyslog.conf - bugfix: setting for $EscapeCopntrolCharactersOnReceive was not properly initialized - clarified usage of space-cc property replacer option - improved abort diagnostic handler - some initial effort for malloc/free runtime debugging support - bugfix: using dynafile actions caused rsyslogd abort - fixed minor man errors thanks to Michael Biebl --------------------------------------------------------------------------- Version 3.11.0 (rgerhards), 2008-01-31 - implemented queued actions - implemented simple rate limiting for actions - implemented deliberate discarding of lower priority messages over higher priority ones when a queue runs out of space - implemented disk quotas for disk queues - implemented the $ActionResumeRetryCount config directive - added $ActionQueueFilename config directive - added $ActionQueueSize config directive - added $ActionQueueHighWaterMark config directive - added $ActionQueueLowWaterMark config directive - added $ActionQueueDiscardMark config directive - added $ActionQueueDiscardSeverity config directive - added $ActionQueueCheckpointInterval config directive - added $ActionQueueType config directive - added $ActionQueueWorkerThreads config directive - added $ActionQueueTimeoutshutdown config directive - added $ActionQueueTimeoutActionCompletion config directive - added $ActionQueueTimeoutenQueue config directive - added $ActionQueueTimeoutworkerThreadShutdown config directive - added $ActionQueueWorkerThreadMinimumMessages config directive - added $ActionQueueMaxFileSize config directive - added $ActionQueueSaveonShutdown config directive - addded $ActionQueueDequeueSlowdown config directive - addded $MainMsgQueueDequeueSlowdown config directive - bugfix: added forgotten docs to package - improved debugging support - fixed a bug that caused $MainMsgQueueCheckpointInterval to work incorrectly - when a long-running action needs to be cancelled on shutdown, the message that was processed by it is now preserved. This finishes support for guaranteed delivery of messages (if the output supports it, of course) - fixed bug in output module interface, see http://sourceforge.net/tracker/index.php?func=detail&aid=1881008&group_id=123448&atid=696552 - changed the ommysql output plugin so that the (lengthy) connection initialization now takes place in message processing. This works much better with the new queued action mode (fast startup) - fixed a bug that caused a potential hang in file and fwd output module varmojfekoj provided the patch - many thanks! - bugfixed stream class offset handling on 32bit platforms --------------------------------------------------------------------------- Version 3.10.3 (rgerhards), 2008-01-28 - fixed a bug with standard template definitions (not a big deal) - thanks to varmojfekoj for spotting it - run-time instrumentation added - implemented disk-assisted queue mode, which enables on-demand disk spooling if the queue's in-memory queue is exhausted - implemented a dynamic worker thread pool for processing incoming messages; workers are started and shut down as need arises - implemented a run-time instrumentation debug package - implemented the $MainMsgQueueSaveOnShutdown config directive - implemented the $MainMsgQueueWorkerThreadMinimumMessages config directive - implemented the $MainMsgQueueTimeoutWorkerThreadShutdown config directive --------------------------------------------------------------------------- Version 3.10.2 (rgerhards), 2008-01-14 - added the ability to keep stop rsyslogd without the need to drain the main message queue. In disk queue mode, rsyslog continues to run from the point where it stopped. In case of a system failure, it continues to process messages from the last checkpoint. - fixed a bug that caused a segfault on startup when no $WorkDir directive was specified in rsyslog.conf - provided more fine-grain control over shutdown timeouts and added a way to specify the enqueue timeout when the main message queue is full - implemented $MainMsgQueueCheckpointInterval config directive - implemented $MainMsgQueueTimeoutActionCompletion config directive - implemented $MainMsgQueueTimeoutEnqueue config directive - implemented $MainMsgQueueTimeoutShutdown config directive --------------------------------------------------------------------------- Version 3.10.1 (rgerhards), 2008-01-10 - implemented the "disk" queue mode. However, it currently is of very limited use, because it does not support persistence over rsyslogd runs. So when rsyslogd is stopped, the queue is drained just as with the in-memory queue modes. Persistent queues will be a feature of the next release. - performance-optimized string class, should bring an overall improvement - fixed a memory leak in imudp -- thanks to varmojfekoj for the patch - fixed a race condition that could lead to a rsyslogd hang when during HUP or termination - done some doc updates - added $WorkDirectory config directive - added $MainMsgQueueFileName config directive - added $MainMsgQueueMaxFileSize config directive --------------------------------------------------------------------------- Version 3.10.0 (rgerhards), 2008-01-07 - implemented input module interface and initial input modules - enhanced threading for input modules (each on its own thread now) - ability to bind UDP listeners to specific local interfaces/ports and ability to run multiple of them concurrently - added ability to specify listen IP address for UDP syslog server - license changed to GPLv3 - mark messages are now provided by loadble module immark - rklogd is no longer provided. Its functionality has now been taken over by imklog, a loadable input module. This offers a much better integration into rsyslogd and makes sure that the kernel logger process is brought up and down at the appropriate times - enhanced $IncludeConfig directive to support wildcard characters (thanks to Michael Biebl) - all inputs are now implemented as loadable plugins - enhanced threading model: each input module now runs on its own thread - enhanced message queue which now supports different queueing methods (among others, this can be used for performance fine-tuning) - added a large number of new configuration directives for the new input modules - enhanced multi-threading utilizing a worker thread pool for the main message queue - compilation without pthreads is no longer supported - much cleaner code due to new objects and removal of single-threading mode --------------------------------------------------------------------------- Version 2.0.8 V2-STABLE (rgerhards), 2008-??-?? - bugfix: ompgsql did not detect problems in sql command execution this could cause loss of messages. The handling was correct if the connection broke, but not if there was a problem with statement execution. The most probable case for such a case would be invalid sql inside the template, and this is now much easier to diagnose. - doc bugfix: default for $DirCreateMode incorrectly stated --------------------------------------------------------------------------- Version 2.0.7 V2-STABLE (rgerhards), 2008-04-14 - bugfix: the default for $DirCreateMode was 0644, and as such wrong. It has now been changed to 0700. For some background, please see http://lists.adiscon.net/pipermail/rsyslog/2009-April/001986.html - bugfix: "$CreateDirs off" also disabled file creation Thanks to William Tisater for analyzing this bug and providing a patch. The actual code change is heavily based on William's patch. - bugfix: memory leak in ompgsql Thanks to Ken for providing the patch - bugfix: potential memory leak in msg.c This one did not surface yet and the issue was actually found due to a problem in v4 - but better fix it here, too --------------------------------------------------------------------------- Version 2.0.6 V2-STABLE (rgerhards), 2008-08-07 - bugfix: memory leaks in rsyslogd, primarily in singlethread mode Thanks to Frederico Nunez for providing the fix - bugfix: copy&paste error lead to dangling if - this caused a very minor issue with re-formatting a RFC3164 date when the message was invalidly formatted and had a colon immediately after the date. This was in the code for some years (even v1 had it) and I think it never had any effect at all in practice. Though, it should be fixed - but definitely nothing to worry about. --------------------------------------------------------------------------- Version 2.0.6 V2-STABLE (rgerhards), 2008-08-07 - bugfix: IPv6 addresses could not be specified in forwarding actions New syntax @[addr]:port introduced to enable that. Root problem was IPv6 addresses contain colons. (backport from 3.21.3) --------------------------------------------------------------------------- Version 2.0.5 STABLE (rgerhards), 2008-05-15 - bugfix: regular expressions inside property replacer did not work properly - adapted to liblogging 0.7.1+ --------------------------------------------------------------------------- Version 2.0.4 STABLE (rgerhards), 2008-03-27 - bugfix: internally generated messages had "FROMHOST" property not set - bugfix: continue parsing if tag is oversize (discard oversize part) - thanks to mclaughlin77@gmail.com for the patch - added $HHOUR and $QHOUR system properties - can be used for half- and quarter-hour logfile rotation --------------------------------------------------------------------------- Version 2.0.3 STABLE (rgerhards), 2008-03-12 - bugfix: setting for $EscapeCopntrolCharactersOnReceive was not properly initialized - bugfix: resolved potential segfault condition on HUP (extremely unlikely to happen in practice), for details see tracker: http://bugzilla.adiscon.com/show_bug.cgi?id=38 - improved the man pages a bit - thanks to Michael Biebl for the patch - bugfix: not properly initialized data could cause several segfaults if there were errors in the config file - thanks to varmojfekoj for the patch --------------------------------------------------------------------------- Version 2.0.2 STABLE (rgerhards), 2008-02-12 - fixed a bug that could cause invalid string handling via strerror_r varmojfekoj provided the patch - many thanks! - added x-info field to rsyslogd startup/shutdown message. Hopefully points users to right location for further info (many don't even know they run rsyslog ;)) - bugfix: suspended actions were not always properly resumed varmojfekoj provided the patch - many thanks! - bugfix: errno could be changed during mark processing, leading to invalid error messages when processing inputs. Thank to varmojfekoj for pointing out this problem. - bugfix: trailing ":" of tag was lost while parsing legacy syslog messages without timestamp - thanks to Anders Blomdell for providing a patch! - bugfix (doc): misspelled config directive, invalid signal info - applied some doc fixes from Michel Biebl and cleaned up some no longer needed files suggested by him - cleaned up stringbuf.c to fix an annoyance reported by Anders Blomdell - fixed bug that caused invalid treatment of tabs (HT) in rsyslog.conf --------------------------------------------------------------------------- Version 2.0.1 STABLE (rgerhards), 2008-01-24 - fixed a bug in integer conversion - but this function was never called, so it is not really a useful bug fix ;) - fixed a bug with standard template definitions (not a big deal) - thanks to varmojfekoj for spotting it - fixed a bug that caused a potential hang in file and fwd output module varmojfekoj provided the patch - many thanks! --------------------------------------------------------------------------- Version 2.0.0 STABLE (rgerhards), 2008-01-02 - re-release of 1.21.2 as STABLE with no modifications except some doc updates --------------------------------------------------------------------------- Version 1.21.2 (rgerhards), 2007-12-28 - created a gss-api output module. This keeps GSS-API code and TCP/UDP code separated. It is also important for forward- compatibility with v3. Please note that this change breaks compatibility with config files created for 1.21.0 and 1.21.1 - this was considered acceptable. - fixed an error in forwarding retry code (could lead to message corruption but surfaced very seldom) - increased portability for older platforms (AI_NUMERICSERV moved) - removed socket leak in omfwd.c - cross-platform patch for GSS-API compile problem on some platforms thanks to darix for the patch! --------------------------------------------------------------------------- Version 1.21.1 (rgerhards), 2007-12-23 - small doc fix for $IncludeConfig - fixed a bug in llDestroy() - bugfix: fixing memory leak when message queue is full and during parsing. Thanks to varmojfekoj for the patch. - bugfix: when compiled without network support, unix sockets were not properply closed - bugfix: memory leak in cfsysline.c/doGetWord() fixed --------------------------------------------------------------------------- Version 1.21.0 (rgerhards), 2007-12-19 - GSS-API support for syslog/TCP connections was added. Thanks to varmojfekoj for providing the patch with this functionality - code cleanup - enhanced $IncludeConfig directive to support wildcard filenames - changed some multithreading synchronization --------------------------------------------------------------------------- Version 1.20.1 (rgerhards), 2007-12-12 - corrected a debug setting that survived release. Caused TCP connections to be retried unnecessarily often. - When a hostname ACL was provided and DNS resolution for that name failed, ACL processing was stopped at that point. Thanks to mildew for the patch. Fedora Bugzilla: http://bugzilla.redhat.com/show_bug.cgi?id=395911 - fixed a potential race condition, see link for details: http://rgerhards.blogspot.com/2007/12/rsyslog-race-condition.html Note that the probability of problems from this bug was very remote - fixed a memory leak that happend when PostgreSQL date formats were used --------------------------------------------------------------------------- Version 1.20.0 (rgerhards), 2007-12-07 - an output module for postgres databases has been added. Thanks to sur5r for contributing this code - unloading dynamic modules has been cleaned up, we now have a real implementation and not just a dummy "good enough for the time being". - enhanced platform independence - thanks to Bartosz Kuzma and Michael Biebl for their very useful contributions - some general code cleanup (including warnings on 64 platforms, only) --------------------------------------------------------------------------- Version 1.19.12 (rgerhards), 2007-12-03 - cleaned up the build system (thanks to Michael Biebl for the patch) - fixed a bug where ommysql was still not compiled with -pthread option --------------------------------------------------------------------------- Version 1.19.11 (rgerhards), 2007-11-29 - applied -pthread option to build when building for multi-threading mode hopefully solves an issue with segfaulting --------------------------------------------------------------------------- Version 1.19.10 (rgerhards), 2007-10-19 - introdcued the new ":modulename:" syntax for calling module actions in selector lines; modified ommysql to support it. This is primarily an aid for further modules and a prequisite to actually allow third party modules to be created. - minor fix in slackware startup script, "-r 0" is now "-r0" - updated rsyslogd doc set man page; now in html format - undid creation of a separate thread for the main loop -- this did not turn out to be needed or useful, so reduce complexity once again. - added doc fixes provided by Michael Biebl - thanks --------------------------------------------------------------------------- Version 1.19.9 (rgerhards), 2007-10-12 - now packaging system which again contains all components in a single tarball - modularized main() a bit more, resulting in less complex code - experimentally added an additional thread - will see if that affects the segfault bug we experience on some platforms. Note that this change is scheduled to be removed again later. --------------------------------------------------------------------------- Version 1.19.8 (rgerhards), 2007-09-27 - improved repeated message processing - applied patch provided by varmojfekoj to support building ommysql in its own way (now also resides in a plugin subdirectory); ommysql is now a separate package - fixed a bug in cvthname() that lead to message loss if part of the source hostname would have been dropped - created some support for distributing ommysql together with the main rsyslog package. I need to re-think it in the future, but for the time being the current mode is best. I now simply include one additional tarball for ommysql inside the main distribution. I look forward to user feedback on how this should be done best. In the long term, a separate project should be spawend for ommysql, but I'd like to do that only after the plugin interface is fully stable (what it is not yet). --------------------------------------------------------------------------- Version 1.19.7 (rgerhards), 2007-09-25 - added code to handle situations where senders send us messages ending with a NUL character. It is now simply removed. This also caused trailing LF reduction to fail, when it was followed by such a NUL. This is now also handled. - replaced some non-thread-safe function calls by their thread-safe counterparts - fixed a minor memory leak that occured when the %APPNAME% property was used (I think nobody used that in practice) - fixed a bug that caused signal handlers in cvthname() not to be restored when a malicious pointer record was detected and processing of the message been stopped for that reason (this should be really rare and can not be related to the segfault bug we are hunting). - fixed a bug in cvthname that lead to passing a wrong parameter - in practice, this had no impact. - general code cleanup (e.g. compiler warnings, comments) --------------------------------------------------------------------------- Version 1.19.6 (rgerhards), 2007-09-11 - applied patch by varmojfekoj to change signal handling to the new sigaction API set (replacing the depreciated signal() calls and its friends. - fixed a bug that in --enable-debug mode caused an assertion when the discard action was used - cleaned up compiler warnings - applied patch by varmojfekoj to FIX a bug that could cause segfaults if empty properties were processed using modifying options (e.g. space-cc, drop-cc) - fixed man bug: rsyslogd supports -l option --------------------------------------------------------------------------- Version 1.19.5 (rgerhards), 2007-09-07 - changed part of the CStr interface so that better error tracking is provided and the calling sequence is more intuitive (there were invalid calls based on a too-weired interface) - (hopefully) fixed some remaining bugs rooted in wrong use of the CStr class. These could lead to program abort. - applied patch by varmojfekoj two fix two potential segfault situations - added $ModDir config directive - modified $ModLoad so that an absolute path may be specified as module name (e.g. /rsyslog/ommysql.so) --------------------------------------------------------------------------- Version 1.19.4 (rgerhards/varmojfekoj), 2007-09-04 - fixed a number of small memory leaks - thanks varmojfekoj for patching - fixed an issue with CString class that could lead to rsyslog abort in tplToString() - thanks varmojfekoj for patching - added a man-version of the config file documenation - thanks to Michel Samia for providing the man file - fixed bug: a template like this causes an infinite loop: $template opts,"%programname:::a,b%" thanks varmojfekoj for the patch - fixed bug: case changing options crash freeing the string pointer because they modify it: $template opts2,"%programname::1:lowercase%" thanks varmojfekoj for the patch --------------------------------------------------------------------------- Version 1.19.3 (mmeckelein/varmojfekoj), 2007-08-31 - small mem leak fixed (after calling parseSelectorAct) - Thx varmojkekoj - documentation section "Regular File" und "Blocks" updated - solved an issue with dynamic file generation - Once again many thanks to varmojfekoj - the negative selector for program name filter (Blocks) does not work as expected - Thanks varmojfekoj for patching - added forwarding information to sysklogd (requires special template) to config doc --------------------------------------------------------------------------- Version 1.19.2 (mmeckelein/varmojfekoj), 2007-08-28 - a specifically formed message caused a segfault - Many thanks varmojfekoj for providing a patch - a typo and a weird condition are fixed in msg.c - Thanks again varmojfekoj - on file creation the file was always owned by root:root. This is fixed now - Thanks ypsa for solving this issue --------------------------------------------------------------------------- Version 1.19.1 (mmeckelein), 2007-08-22 - a bug that caused a high load when a TCP/UDP connection was closed is fixed now - Thanks mildew for solving this issue - fixed a bug which caused a segfault on reinit - Thx varmojfekoj for the patch - changed the hardcoded module path "/lib/rsyslog" to $(pkglibdir) in order to avoid trouble e.g. on 64 bit platforms (/lib64) - many thanks Peter Vrabec and darix, both provided a patch for solving this issue - enhanced the unloading of modules - thanks again varmojfekoj - applied a patch from varmojfekoj which fixes various little things in MySQL output module --------------------------------------------------------------------------- Version 1.19.0 (varmojfekoj/rgerhards), 2007-08-16 - integrated patch from varmojfekoj to make the mysql module a loadable one many thanks for the patch, MUCH appreciated --------------------------------------------------------------------------- Version 1.18.2 (rgerhards), 2007-08-13 - fixed a bug in outchannel code that caused templates to be incorrectly parsed - fixed a bug in ommysql that caused a wrong ";template" missing message - added some code for unloading modules; not yet fully complete (and we do not yet have loadable modules, so this is no problem) - removed debian subdirectory by request of a debian packager (this is a special subdir for debian and there is also no point in maintaining it when there is a debian package available - so I gladly did this) in some cases - improved overall doc quality (some pages were quite old) and linked to more of the online resources. - improved /contrib/delete_mysql script by adding a host option and some other minor modifications --------------------------------------------------------------------------- Version 1.18.1 (rgerhards), 2007-08-08 - applied a patch from varmojfekoj which solved a potential segfault of rsyslogd on HUP - applied patch from Michel Samia to fix compilation when the pthreads feature is disabled - some code cleanup (moved action object to its own file set) - add config directive $MainMsgQueueSize, which now allows to configure the queue size dynamically - all compile-time settings are now shown in rsyslogd -v, not just the active ones - enhanced performance a little bit more - added config file directive $ActionResumeInterval - fixed a bug that prevented compilation under debian sid - added a contrib directory for user-contributed useful things --------------------------------------------------------------------------- Version 1.18.0 (rgerhards), 2007-08-03 - rsyslog now supports fallback actions when an action did not work. This is a great feature e.g. for backup database servers or backup syslog servers - modified rklogd to only change the console log level if -c is specified - added feature to use multiple actions inside a single selector - implemented $ActionExecOnlyWhenPreviousIsSuspended config directive - error messages during startup are now spit out to the configured log destinations --------------------------------------------------------------------------- Version 1.17.6 (rgerhards), 2007-08-01 - continued to work on output module modularization - basic stage of this work is now FINISHED - fixed bug in OMSRcreate() - always returned SR_RET_OK - fixed a bug that caused ommysql to always complain about missing templates - fixed a mem leak in OMSRdestruct - freeing the object itself was forgotten - thanks to varmojfekoj for the patch - fixed a memory leak in syslogd/init() that happend when the config file could not be read - thanks to varmojfekoj for the patch - fixed insufficient memory allocation in addAction() and its helpers. The initial fix and idea was developed by mildew, I fine-tuned it a bit. Thanks a lot for the fix, I'd probably had pulled out my hair to find the bug... - added output of config file line number when a parsing error occured - fixed bug in objomsr.c that caused program to abort in debug mode with an invalid assertion (in some cases) - fixed a typo that caused the default template for MySQL to be wrong. thanks to mildew for catching this. - added configuration file command $DebugPrintModuleList and $DebugPrintCfSysLineHandlerList - fixed an invalid value for the MARK timer - unfortunately, there was a testing aid left in place. This resulted in quite frequent MARK messages - added $IncludeConfig config directive - applied a patch from mildew to prevent rsyslogd from freezing under heavy load. This could happen when the queue was full. Now, we drop messages but rsyslogd remains active. --------------------------------------------------------------------------- Version 1.17.5 (rgerhards), 2007-07-30 - continued to work on output module modularization - fixed a missing file bug - thanks to Andrea Montanari for reporting this problem - fixed a problem with shutting down the worker thread and freeing the selector_t list - this caused messages to be lost, because the message queue was not properly drained before the selectors got destroyed. --------------------------------------------------------------------------- Version 1.17.4 (rgerhards), 2007-07-27 - continued to work on output module modularization - fixed a situation where rsyslogd could create zombie processes thanks to mildew for the patch - applied patch from Michel Samia to fix compilation when NOT compiled for pthreads --------------------------------------------------------------------------- Version 1.17.3 (rgerhards), 2007-07-25 - continued working on output module modularization - fixed a bug that caused rsyslogd to segfault on exit (and probably also on HUP), when there was an unsent message in a selector that required forwarding and the dns lookup failed for that selector (yes, it was pretty unlikely to happen;)) thanks to varmojfekoj <varmojfekoj@gmail.com> for the patch - fixed a memory leak in config file parsing and die() thanks to varmojfekoj <varmojfekoj@gmail.com> for the patch - rsyslogd now checks on startup if it is capable to performa any work at all. If it cant, it complains and terminates thanks to Michel Samia for providing the patch! - fixed a small memory leak when HUPing syslogd. The allowed sender list now gets freed. thanks to mildew for the patch. - changed the way error messages in early startup are logged. They now do no longer use the syslogd code directly but are rather send to stderr. --------------------------------------------------------------------------- Version 1.17.2 (rgerhards), 2007-07-23 - made the port part of the -r option optional. Needed for backward compatibility with sysklogd - replaced system() calls with something more reasonable. Please note that this might break compatibility with some existing configuration files. We accept this in favour of the gained security. - removed a memory leak that could occur if timegenerated was used in RFC 3164 format in templates - did some preparation in msg.c for advanced multithreading - placed the hooks, but not yet any active code - worked further on modularization - added $ModLoad MySQL (dummy) config directive - added DropTrailingLFOnReception config directive --------------------------------------------------------------------------- Version 1.17.1 (rgerhards), 2007-07-20 - fixed a bug that caused make install to install rsyslogd and rklogd under the wrong names - fixed bug that caused $AllowedSenders to handle IPv6 scopes incorrectly; also fixed but that could grabble $AllowedSender wildcards. Thanks to mildew@gmail.com for the patch - minor code cleanup - thanks to Peter Vrabec for the patch - fixed minimal memory leak on HUP (caused by templates) thanks to varmojfekoj <varmojfekoj@gmail.com> for the patch - fixed another memory leak on HUPing and on exiting rsyslogd again thanks to varmojfekoj <varmojfekoj@gmail.com> for the patch - code cleanup (removed compiler warnings) - fixed portability bug in configure.ac - thanks to Bartosz Kuźma for patch - moved msg object into its own file set - added the capability to continue trying to write log files when the file system is full. Functionality based on patch by Martin Schulze to sysklogd package. --------------------------------------------------------------------------- Version 1.17.0 (RGer), 2007-07-17 - added $RepeatedLineReduction config parameter - added $EscapeControlCharactersOnReceive config parameter - added $ControlCharacterEscapePrefix config parameter - added $DirCreateMode config parameter - added $CreateDirs config parameter - added $DebugPrintTemplateList config parameter - added $ResetConfigVariables config parameter - added $FileOwner config parameter - added $FileGroup config parameter - added $DirOwner config parameter - added $DirGroup config parameter - added $FailOnChownFailure config parameter - added regular expression support to the filter engine thanks to Michel Samia for providing the patch! - enhanced $AllowedSender functionality. Credits to mildew@gmail.com for the patch doing that - added IPv6 support - allowed DNS hostnames - allowed DNS wildcard names - added new option $DropMsgsWithMaliciousDnsPTRRecords - added autoconf so that rfc3195d, rsyslogd and klogd are stored to /sbin - added capability to auto-create directories with dynaFiles --------------------------------------------------------------------------- Version 1.16.0 (RGer/Peter Vrabec), 2007-07-13 - The Friday, 13th Release ;) - build system switched to autotools - removed SYSV preprocessor macro use, replaced with autotools equivalents - fixed a bug that caused rsyslogd to segfault when TCP listening was disabled and it terminated - added new properties "syslogfacility-text" and "syslogseverity-text" thanks to varmojfekoj <varmojfekoj@gmail.com> for the patch - added the -x option to disable hostname dns reslution thanks to varmojfekoj <varmojfekoj@gmail.com> for the patch - begun to better modularize syslogd.c - this is an ongoing project; moved type definitions to a separate file - removed some now-unused fields from struct filed - move file size limit fields in struct field to the "right spot" (the file writing part of the union - f_un.f_file) - subdirectories linux and solaris are no longer part of the distribution package. This is not because we cease support for them, but there are no longer any files in them after the move to autotools --------------------------------------------------------------------------- Version 1.15.1 (RGer), 2007-07-10 - fixed a bug that caused a dynaFile selector to stall when there was an open error with one file - improved template processing for dynaFiles; templates are now only looked up during initialization - speeds up processing - optimized memory layout in struct filed when compiled with MySQL support - fixed a bug that caused compilation without SYSLOG_INET to fail - re-enabled the "last message repeated n times" feature. This feature was not taken care of while rsyslogd evolved from sysklogd and it was more or less defunct. Now it is fully functional again. - added system properties: $NOW, $YEAR, $MONTH, $DAY, $HOUR, $MINUTE - fixed a bug in iovAsString() that caused a memory leak under stress conditions (most probably memory shortage). This was unlikely to ever happen, but it doesn't hurt doing it right - cosmetic: defined type "uchar", change all unsigned chars to uchar --------------------------------------------------------------------------- Version 1.15.0 (RGer), 2007-07-05 - added ability to dynamically generate file names based on templates and thus properties. This was a much-requested feature. It makes life easy when it e.g. comes to splitting files based on the sender address. - added $umask and $FileCreateMode config file directives - applied a patch from Bartosz Kuzma to compile cleanly under NetBSD - checks for extra (unexpected) characters in system config file lines have been added - added IPv6 documentation - was accidently missing from CVS - begun to change char to unsigned char --------------------------------------------------------------------------- Version 1.14.2 (RGer), 2007-07-03 ** this release fixes all known nits with IPv6 ** - restored capability to do /etc/service lookup for "syslog" service when -r 0 was given - documented IPv6 handling of syslog messages - integrate patch from Bartosz Kuźma to make rsyslog compile under Solaris again (the patch replaced a strndup() call, which is not available under Solaris - improved debug logging when waiting on select - updated rsyslogd man page with new options (-46A) --------------------------------------------------------------------------- Version 1.14.1 (RGer/Peter Vrabec), 2007-06-29 - added Peter Vrabec's patch for IPv6 TCP - prefixed all messages send to stderr in rsyslogd with "rsyslogd: " --------------------------------------------------------------------------- Version 1.14.0 (RGer/Peter Vrabec), 2007-06-28 - Peter Vrabec provided IPv6 for rsyslog, so we are now IPv6 enabled IPv6 Support is currently for UDP only, TCP is to come soon. AllowedSender configuration does not yet work for IPv6. - fixed code in iovCreate() that broke C's strict aliasing rules - fixed some char/unsigned char differences that forced the compiler to spit out warning messages - updated the Red Hat init script to fix a known issue (thanks to Peter Vrabec) --------------------------------------------------------------------------- Version 1.13.5 (RGer), 2007-06-22 - made the TCP session limit configurable via command line switch now -t <port>,<max sessions> - added man page for rklogd(8) (basically a copy from klogd, but now there is one...) - fixed a bug that caused internal messages (e.g. rsyslogd startup) to appear without a tag. - removed a minor memory leak that occurred when TAG processing requalified a HOSTNAME to be a TAG (and a TAG already was set). - removed potential small memory leaks in MsgSet***() functions. There would be a leak if a property was re-set, something that happened extremely seldom. --------------------------------------------------------------------------- Version 1.13.4 (RGer), 2007-06-18 - added a new property "PRI-text", which holds the PRI field in textual form (e.g. "syslog.info") - added alias "syslogseverity" for "syslogpriority", which is a misleading property name that needs to stay for historical reasons (and backward-compatility) - added doc on how to record PRI value in log file - enhanced signal handling in klogd, including removal of an unsafe call to the logging system during signal handling --------------------------------------------------------------------------- Version 1.13.3 (RGer), 2007-06-15 - create a version of syslog.c from scratch. This is now - highly optimized for rsyslog - removes an incompatible license problem as the original version had a BSD license with advertising clause - fixed in the regard that rklogd will continue to work when rsysogd has been restarted (the original version, as well as sysklogd, will remain silent then) - solved an issue with an extra NUL char at message end that the original version had - applied some changes to klogd to care for the new interface - fixed a bug in syslogd.c which prevented compiling under debian --------------------------------------------------------------------------- Version 1.13.2 (RGer), 2007-06-13 - lib order in makefile patched to facilitate static linking - thanks to Bennett Todd for providing the patch - Integrated a patch from Peter Vrabec (pvrabec@redheat.com): - added klogd under the name of rklogd (remove dependency on original sysklogd package - createDB.sql now in UTF - added additional config files for use on Red Hat --------------------------------------------------------------------------- Version 1.13.1 (RGer), 2007-02-05 - changed the listen backlog limit to a more reasonable value based on the maximum number of TCP connections configurd (10% + 5) - thanks to Guy Standen for the hint (actually, the limit was 5 and that was a left-over from early testing). - fixed a bug in makefile which caused DB-support to be disabled when NETZIP support was enabled - added the -e option to allow transmission of every message to remote hosts (effectively turns off duplicate message suppression) - (somewhat) improved memory consumption when compiled with MySQL support - looks like we fixed an incompatibility with MySQL 5.x and above software At least in one case, the remote server name was destroyed, leading to a connection failure. The new, improved code does not have this issue and so we see this as solved (the new code is generally somewhat better, so there is a good chance we fixed this incompatibility). --------------------------------------------------------------------------- Version 1.13.0 (RGer), 2006-12-19 - added '$' as ToPos proptery replacer specifier - means "up to the end of the string" - property replacer option "escape-cc", "drop-cc" and "space-cc" added - changed the handling of \0 characters inside syslog messages. We now consistently escape them to "#000". This is somewhat recommended in the draft-ietf-syslog-protocol-19 draft. While the real recomendation is to not escape any characters at all, we can not do this without considerable modification of the code. So we escape it to "#000", which is consistent with a sample found in the Internet-draft. - removed message glue logic (see printchopped() comment for details) Also caused removal of parts table and thus some improvements in memory usage. - changed the default MAXLINE to 2048 to take care of recent syslog standardization efforts (can easily be changed in syslogd.c) - added support for byte-counted TCP syslog messages (much like syslog-transport-tls-05 Internet Draft). This was necessary to support compression over TCP. - added support for receiving compressed syslog messages - added support for sending compressed syslog messages - fixed a bug where the last message in a syslog/tcp stream was lost if it was not properly terminated by a LF character --------------------------------------------------------------------------- Version 1.12.3 (RGer), 2006-10-04 - implemented some changes to support Solaris (but support is not yet complete) - commented out (via #if 0) some methods that are currently not being use but should be kept for further us - added (interim) -u 1 option to turn off hostname and tag parsing - done some modifications to better support Fedora - made the field delimiter inside property replace configurable via template - fixed a bug in property replacer: if fields were used, the delimitor became part of the field. Up until now, this was barely noticable as the delimiter as TAB only and thus invisible to a human. With other delimiters available now, it quickly showed up. This bug fix might cause some grief to existing installations if they used the extra TAB for whatever reasons - sorry folks... Anyhow, a solution is easy: just add a TAB character contstant into your template. Thus, there has no attempt been made to do this in a backwards-compatible way. --------------------------------------------------------------------------- Version 1.12.2 (RGer), 2006-02-15 - fixed a bug in the RFC 3339 date formatter. An extra space was added after the actual timestamp - added support for providing high-precision RFC3339 timestamps for (rsyslogd-)internally-generated messages - very (!) experimental support for syslog-protocol internet draft added (the draft is experimental, the code is solid ;)) - added support for field-extracting in the property replacer - enhanced the legacy-syslog parser so that it can interpret messages that do not contain a TIMESTAMP - fixed a bug that caused the default socket (usually /dev/log) to be opened even when -o command line option was given - fixed a bug in the Debian sample startup script - it caused rsyslogd to listen to remote requests, which it shouldn't by default --------------------------------------------------------------------------- Version 1.12.1 (RGer), 2005-11-23 - made multithreading work with BSD. Some signal-handling needed to be restructured. Also, there might be a slight delay of up to 10 seconds when huping and terminating rsyslogd under BSD - fixed a bug where a NULL-pointer was passed to printf() in logmsg(). - fixed a bug during "make install" where rc3195d was not installed Thanks to Bennett Todd for spotting this. - fixed a bug where rsyslogd dumped core when no TAG was found in the received message - enhanced message parser so that it can deal with missing hostnames in many cases (may not be totally fail-safe) - fixed a bug where internally-generated messages did not have the correct TAG --------------------------------------------------------------------------- Version 1.12.0 (RGer), 2005-10-26 - moved to a multi-threaded design. single-threading is still optionally available. Multi-threading is experimental! - fixed a potential race condition. In the original code, marking was done by an alarm handler, which could lead to all sorts of bad things. This has been changed now. See comments in syslogd.c/domark() for details. - improved debug output for property-based filters - not a code change, but: I have checked all exit()s to make sure that none occurs once rsyslogd has started up. Even in unusual conditions (like low-memory conditions) rsyslogd somehow remains active. Of course, it might loose a message or two, but at least it does not abort and it can also recover when the condition no longer persists. - fixed a bug that could cause loss of the last message received immediately before rsyslogd was terminated. - added comments on thread-safety of global variables in syslogd.c - fixed a small bug: spurios printf() when TCP syslog was used - fixed a bug that causes rsyslogd to dump core on termination when one of the selector lines did not receive a message during the run (very unlikely) - fixed an one-too-low memory allocation in the TCP sender. Could result in rsyslogd dumping core. - fixed a bug with regular expression support (thanks to Andres Riancho) - a little bit of code restructuring (especially main(), which was horribly large) --------------------------------------------------------------------------- Version 1.11.1 (RGer), 2005-10-19 - support for BSD-style program name and host blocks - added a new property "programname" that can be used in templates - added ability to specify listen port for rfc3195d - fixed a bug that rendered the "startswith" comparison operation unusable. - changed more functions to "static" storage class to help compiler optimize (should have been static in the first place...) - fixed a potential memory leak in the string buffer class destructor. As the destructur was previously never called, the leak did not actually appear. - some internal restructuring in anticipation/preparation of minimal multi-threading support - rsyslogd still shares some code with the sysklogd project. Some patches for this shared code have been brought over from the sysklogd CVS. --------------------------------------------------------------------------- Version 1.11.0 (RGer), 2005-10-12 - support for receiving messages via RFC 3195; added rfc3195d for that purpose - added an additional guard to prevent rsyslogd from aborting when the 2gb file size limit is hit. While a user can configure rsyslogd to handle such situations, it would abort if that was not done AND large file support was not enabled (ok, this is hopefully an unlikely scenario) - fixed a bug that caused additional Unix domain sockets to be incorrectly processed - could lead to message loss in extreme cases --------------------------------------------------------------------------- Version 1.10.2 (RGer), 2005-09-27 - added comparison operations in property-based filters: * isequal * startswith - added ability to negate all property-based filter comparison operations by adding a !-sign right in front of the operation name - added the ability to specify remote senders for UDP and TCP received messages. Allows to block all but well-known hosts - changed the $-config line directives to be case-INsensitive - new command line option -w added: "do not display warnings if messages from disallowed senders are received" - fixed a bug that caused rsyslogd to dump core when the compare value was not quoted in property-based filters - fixed a bug in the new CStr compare function which lead to invalid results (fortunately, this function was not yet used widely) - added better support for "debugging" rsyslog.conf property filters (only if -d switch is given) - changed some function definitions to static, which eventually enables some compiler optimizations - fixed a bug in MySQL code; when a SQL error occured, rsyslogd could run in a tight loop. This was due to invalid sequence of error reporting and is now fixed. --------------------------------------------------------------------------- Version 1.10.1 (RGer), 2005-09-23 - added the ability to execute a shell script as an action. Thanks to Bjoern Kalkbrenner for providing the code! - fixed a bug in the MySQL code; due to the bug the automatic one-time retry after an error did not happen - this lead to error message in cases where none should be seen (e.g. after a MySQL restart) - fixed a security issue with SQL-escaping in conjunction with non-(SQL-)standard MySQL features. --------------------------------------------------------------------------- Version 1.10.0 (RGer), 2005-09-20 REMINDER: 1.10 is the first unstable version if the 1.x series! - added the capability to filter on any property in selector lines (not just facility and priority) - changed stringbuf into a new counted string class - added support for a "discard" action. If a selector line with discard (~ character) is found, no selector lines *after* that line will be processed. - thanks to Andres Riancho, regular expression support has been added to the template engine - added the FROMHOST property in the template processor, which could previously not be obtained. Thanks to Cristian Testa for pointing this out and even providing a fix. - added display of compile-time options to -v output - performance improvement for production build - made some checks to happen only during debug mode - fixed a problem with compiling on SUSE and - while doing so - removed the socket call to set SO_BSDCOMPAT in cases where it is obsolete. --------------------------------------------------------------------------- Version 1.0.4 (RGer), 2006-02-01 - a small but important fix: the tcp receiver had two forgotten printf's in it that caused a lot of unnecessary output to stdout. This was important enough to justify a new release --------------------------------------------------------------------------- Version 1.0.3 (RGer), 2005-11-14 - added an additional guard to prevent rsyslogd from aborting when the 2gb file size limit is hit. While a user can configure rsyslogd to handle such situations, it would abort if that was not done AND large file support was not enabled (ok, this is hopefully an unlikely scenario) - fixed a bug that caused additional Unix domain sockets to be incorrectly processed - could lead to message loss in extreme cases - applied some patches available from the sysklogd project to code shared from there - fixed a bug that causes rsyslogd to dump core on termination when one of the selector lines did not receive a message during the run (very unlikely) - fixed an one-too-low memory allocation in the TCP sender. Could result in rsyslogd dumping core. - fixed a bug in the TCP sender that caused the retry logic to fail after an error or receiver overrun - fixed a bug in init() that could lead to dumping core - fixed a bug that could lead to dumping core when no HOSTNAME or no TAG was present in the syslog message --------------------------------------------------------------------------- Version 1.0.2 (RGer), 2005-10-05 - fixed an issue with MySQL error reporting. When an error occured, the MySQL driver went into an endless loop (at least in most cases). --------------------------------------------------------------------------- Version 1.0.1 (RGer), 2005-09-23 - fixed a security issue with SQL-escaping in conjunction with non-(SQL-)standard MySQL features. --------------------------------------------------------------------------- Version 1.0.0 (RGer), 2005-09-12 - changed install doc to cover daily cron scripts - a trouble source - added rc script for slackware (provided by Chris Elvidge - thanks!) - fixed a really minor bug in usage() - the -r option was still reported as without the port parameter --------------------------------------------------------------------------- Version 0.9.8 (RGer), 2005-09-05 - made startup and shutdown message more consistent and included the pid, so that they can be easier correlated. Used syslog-protocol structured data format for this purpose. - improved config info in startup message, now tells not only if it is listening remote on udp, but also for tcp. Also includes the port numbers. The previous startup message was misleading, because it did not say "remote reception" if rsyslogd was only listening via tcp (but not via udp). - added a "how can you help" document to the doc set --------------------------------------------------------------------------- Version 0.9.7 (RGer), 2005-08-15 - some of the previous doc files (like INSTALL) did not properly reflect the changes to the build process and the new doc. Fixed that. - changed syslogd.c so that when compiled without database support, an error message is displayed when a database action is detected in the config file (previously this was used as an user rule ;)) - fixed a bug in the os-specific Makefiles which caused MySQL support to not be compiled, even if selected --------------------------------------------------------------------------- Version 0.9.6 (RGer), 2005-08-09 - greatly enhanced documentation. Now available in html format in the "doc" folder and FreeBSD. Finally includes an install howto. - improved MySQL error messages a little - they now show up as log messages, too (formerly only in debug mode) - added the ability to specify the listen port for udp syslog. WARNING: This introduces an incompatibility. Formerly, udp syslog was enabled by the -r command line option. Now, it is "-r [port]", which is consistent with the tcp listener. However, just -r will now return an error message. - added sample startup scripts for Debian and FreeBSD - added support for easy feature selection in the makefile. Un- fortunately, this also means I needed to spilt the make file for different OS and distros. There are some really bad syntax differences between FreeBSD and Linux make. --------------------------------------------------------------------------- Version 0.9.5 (RGer), 2005-08-01 - the "semicolon bug" was actually not (fully) solved in 0.9.4. One part of the bug was solved, but another still existed. This one is fixed now, too. - the "semicolon bug" actually turned out to be a more generic bug. It appeared whenever an invalid template name was given. With some selector actions, rsyslogd dumped core, with other it "just" had a small ressource leak with others all worked well. These anomalies are now fixed. Note that they only appeared during system initaliziation once the system was running, nothing bad happened. - improved error reporting for template errors on startup. They are now shown on the console and the start-up tty. Formerly, they were only visible in debug mode. - support for multiple instances of rsyslogd on a single machine added - added new option "-o" --> omit local unix domain socket. This option enables rsyslogd NOT to listen to the local socket. This is most helpful when multiple instances of rsyslogd (or rsyslogd and another syslogd) shall run on a single system. - added new option "-i <pidfile>" which allows to specify the pidfile. This is needed when multiple instances of rsyslogd are to be run. - the new project home page is now online at www.rsyslog.com --------------------------------------------------------------------------- Version 0.9.4 (RGer), 2005-07-25 - finally added the TCP sender. It now supports non-blocking mode, no longer disabling message reception during connect. As it is now, it is usable in production. The code could be more sophisticated, but I've kept it short in anticipation of the move to liblogging, which will lead to the removal of the code just written ;) - the "exiting on signal..." message still had the "syslogd" name in it. Changed this to "rsyslogd", as we do not have a large user base yet, this should pose no problem. - fixed "the semiconlon" bug. rsyslogd dumped core if a write-db action was specified but no semicolon was given after the password (an empty template was ok, but the semicolon needed to be present). - changed a default for traditional output format. During testing, it was seen that the timestamp written to file in default format was the time of message reception, not the time specified in the TIMESTAMP field of the message itself. Traditionally, the message TIMESTAMP is used and this has been changed now. --------------------------------------------------------------------------- Version 0.9.3 (RGer), 2005-07-19 - fixed a bug in the message parser. In June, the RFC 3164 timestamp was not correctly parsed (yes, only in June and some other months, see the code comment to learn why...) - added the ability to specify the destination port when forwarding syslog messages (both for TCP and UDP) - added an very experimental TCP sender (activated by @@machine:port in config). This is not yet for production use. If the receiver is not alive, rsyslogd will wait quite some time until the connection request times out, which most probably leads to loss of incoming messages. --------------------------------------------------------------------------- Version 0.9.2 (RGer), around 2005-07-06 - I intended to change the maxsupported message size to 32k to support IHE - but given the memory inefficiency in the usual use cases, I have not done this. I have, however, included very specific instructions on how to do this in the source code. I have also done some testing with 32k messages, so you can change the max size without taking too much risk. - added a syslog/tcp receiver; we now can receive messages via plain tcp, but we can still send only via UDP. The syslog/tcp receiver is the primary enhancement of this release. - slightly changed some error messages that contained a spurios \n at the end of the line (which gives empty lines in your log...) --------------------------------------------------------------------------- Version 0.9.1 (RGer) - fixed code so that it compiles without errors under FreeBSD - removed now unused function "allocate_log()" from syslogd.c - changed the make file so that it contains more defines for different environments (in the long term, we need a better system for disabling/enabling features...) - changed some printf's printing off_t types to %lld and explicit (long long) casts. I tried to figure out the exact type, but did not succeed in this. In the worst case, ultra-large peta- byte files will now display funny informational messages on rollover, something I think we can live with for the neersion 3.11.2 (rgerhards), 2008-02-?? --------------------------------------------------------------------------- Version 3.11.1 (rgerhards), 2008-02-12 - SNMP trap sender added thanks to Andre Lorbach (omsnmp) - added input-plugin interface specification in form of a (copy) template input module - applied documentation fix by Michael Biebl -- many thanks! - bugfix: immark did not have MARK flags set... - added x-info field to rsyslogd startup/shutdown message. Hopefully points users to right location for further info (many don't even know they run rsyslog ;)) - bugfix: trailing ":" of tag was lost while parsing legacy syslog messages without timestamp - thanks to Anders Blomdell for providing a patch! - fixed a bug in stringbuf.c related to STRINGBUF_TRIM_ALLOCSIZE, which wasn't supposed to be used with rsyslog. Put a warning message up that tells this feature is not tested and probably not worth the effort. Thanks to Anders Blomdell fro bringing this to our attention - somewhat improved performance of string buffers - fixed bug that caused invalid treatment of tabs (HT) in rsyslog.conf - bugfix: setting for $EscapeCopntrolCharactersOnReceive was not properly initialized - clarified usage of space-cc property replacer option - improved abort diagnostic handler - some initial effort for malloc/free runtime debugging support - bugfix: using dynafile actions caused rsyslogd abort - fixed minor man errors thanks to Michael Biebl --------------------------------------------------------------------------- Version 3.11.0 (rgerhards), 2008-01-31 - implemented queued actions - implemented simple rate limiting for actions - implemented deliberate discarding of lower priority messages over higher priority ones when a queue runs out of space - implemented disk quotas for disk queues - implemented the $ActionResumeRetryCount config directive - added $ActionQueueFilename config directive - added $ActionQueueSize config directive - added $ActionQueueHighWaterMark config directive - added $ActionQueueLowWaterMark config directive - added $ActionQueueDiscardMark config directive - added $ActionQueueDiscardSeverity config directive - added $ActionQueueCheckpointInterval config directive - added $ActionQueueType config directive - added $ActionQueueWorkerThreads config directive - added $ActionQueueTimeoutshutdown config directive - added $ActionQueueTimeoutActionCompletion config directive - added $ActionQueueTimeoutenQueue config directive - added $ActionQueueTimeoutworkerThreadShutdown config directive - added $ActionQueueWorkerThreadMinimumMessages config directive - added $ActionQueueMaxFileSize config directive - added $ActionQueueSaveonShutdown config directive - addded $ActionQueueDequeueSlowdown config directive - addded $MainMsgQueueDequeueSlowdown config directive - bugfix: added forgotten docs to package - improved debugging support - fixed a bug that caused $MainMsgQueueCheckpointInterval to work incorrectly - when a long-running action needs to be cancelled on shutdown, the message that was processed by it is now preserved. This finishes support for guaranteed delivery of messages (if the output supports it, of course) - fixed bug in output module interface, see http://sourceforge.net/tracker/index.php?func=detail&aid=1881008&group_id=123448&atid=696552 - changed the ommysql output plugin so that the (lengthy) connection initialization now takes place in message processing. This works much better with the new queued action mode (fast startup) - fixed a bug that caused a potential hang in file and fwd output module varmojfekoj provided the patch - many thanks! - bugfixed stream class offset handling on 32bit platforms --------------------------------------------------------------------------- Version 3.10.3 (rgerhards), 2008-01-28 - fixed a bug with standard template definitions (not a big deal) - thanks to varmojfekoj for spotting it - run-time instrumentation added - implemented disk-assisted queue mode, which enables on-demand disk spooling if the queue's in-memory queue is exhausted - implemented a dynamic worker thread pool for processing incoming messages; workers are started and shut down as need arises - implemented a run-time instrumentation debug package - implemented the $MainMsgQueueSaveOnShutdown config directive - implemented the $MainMsgQueueWorkerThreadMinimumMessages config directive - implemented the $MainMsgQueueTimeoutWorkerThreadShutdown config directive --------------------------------------------------------------------------- Version 3.10.2 (rgerhards), 2008-01-14 - added the ability to keep stop rsyslogd without the need to drain the main message queue. In disk queue mode, rsyslog continues to run from the point where it stopped. In case of a system failure, it continues to process messages from the last checkpoint. - fixed a bug that caused a segfault on startup when no $WorkDir directive was specified in rsyslog.conf - provided more fine-grain control over shutdown timeouts and added a way to specify the enqueue timeout when the main message queue is full - implemented $MainMsgQueueCheckpointInterval config directive - implemented $MainMsgQueueTimeoutActionCompletion config directive - implemented $MainMsgQueueTimeoutEnqueue config directive - implemented $MainMsgQueueTimeoutShutdown config directive --------------------------------------------------------------------------- Version 3.10.1 (rgerhards), 2008-01-10 - implemented the "disk" queue mode. However, it currently is of very limited use, because it does not support persistence over rsyslogd runs. So when rsyslogd is stopped, the queue is drained just as with the in-memory queue modes. Persistent queues will be a feature of the next release. - performance-optimized string class, should bring an overall improvement - fixed a memory leak in imudp -- thanks to varmojfekoj for the patch - fixed a race condition that could lead to a rsyslogd hang when during HUP or termination - done some doc updates - added $WorkDirectory config directive - added $MainMsgQueueFileName config directive - added $MainMsgQueueMaxFileSize config directive --------------------------------------------------------------------------- Version 3.10.0 (rgerhards), 2008-01-07 - implemented input module interface and initial input modules - enhanced threading for input modules (each on its own thread now) - ability to bind UDP listeners to specific local interfaces/ports and ability to run multiple of them concurrently - added ability to specify listen IP address for UDP syslog server - license changed to GPLv3 - mark messages are now provided by loadble module immark - rklogd is no longer provided. Its functionality has now been taken over by imklog, a loadable input module. This offers a much better integration into rsyslogd and makes sure that the kernel logger process is brought up and down at the appropriate times - enhanced $IncludeConfig directive to support wildcard characters (thanks to Michael Biebl) - all inputs are now implemented as loadable plugins - enhanced threading model: each input module now runs on its own thread - enhanced message queue which now supports different queueing methods (among others, this can be used for performance fine-tuning) - added a large number of new configuration directives for the new input modules - enhanced multi-threading utilizing a worker thread pool for the main message queue - compilation without pthreads is no longer supported - much cleaner code due to new objects and removal of single-threading mode --------------------------------------------------------------------------- Version 2.0.1 STABLE (rgerhards), 2008-01-24 - fixed a bug in integer conversion - but this function was never called, so it is not really a useful bug fix ;) - fixed a bug with standard template definitions (not a big deal) - thanks to varmojfekoj for spotting it - fixed a bug that caused a potential hang in file and fwd output module varmojfekoj provided the patch - many thanks! --------------------------------------------------------------------------- Version 2.0.0 STABLE (rgerhards), 2008-01-02 - re-release of 1.21.2 as STABLE with no modifications except some doc updates --------------------------------------------------------------------------- Version 1.21.2 (rgerhards), 2007-12-28 - created a gss-api output module. This keeps GSS-API code and TCP/UDP code separated. It is also important for forward- compatibility with v3. Please note that this change breaks compatibility with config files created for 1.21.0 and 1.21.1 - this was considered acceptable. - fixed an error in forwarding retry code (could lead to message corruption but surfaced very seldom) - increased portability for older platforms (AI_NUMERICSERV moved) - removed socket leak in omfwd.c - cross-platform patch for GSS-API compile problem on some platforms thanks to darix for the patch! --------------------------------------------------------------------------- Version 1.21.1 (rgerhards), 2007-12-23 - small doc fix for $IncludeConfig - fixed a bug in llDestroy() - bugfix: fixing memory leak when message queue is full and during parsing. Thanks to varmojfekoj for the patch. - bugfix: when compiled without network support, unix sockets were not properply closed - bugfix: memory leak in cfsysline.c/doGetWord() fixed --------------------------------------------------------------------------- Version 1.21.0 (rgerhards), 2007-12-19 - GSS-API support for syslog/TCP connections was added. Thanks to varmojfekoj for providing the patch with this functionality - code cleanup - enhanced $IncludeConfig directive to support wildcard filenames - changed some multithreading synchronization --------------------------------------------------------------------------- Version 1.20.1 (rgerhards), 2007-12-12 - corrected a debug setting that survived release. Caused TCP connections to be retried unnecessarily often. - When a hostname ACL was provided and DNS resolution for that name failed, ACL processing was stopped at that point. Thanks to mildew for the patch. Fedora Bugzilla: http://bugzilla.redhat.com/show_bug.cgi?id=395911 - fixed a potential race condition, see link for details: http://rgerhards.blogspot.com/2007/12/rsyslog-race-condition.html Note that the probability of problems from this bug was very remote - fixed a memory leak that happend when PostgreSQL date formats were used --------------------------------------------------------------------------- Version 1.20.0 (rgerhards), 2007-12-07 - an output module for postgres databases has been added. Thanks to sur5r for contributing this code - unloading dynamic modules has been cleaned up, we now have a real implementation and not just a dummy "good enough for the time being". - enhanced platform independence - thanks to Bartosz Kuzma and Michael Biebl for their very useful contributions - some general code cleanup (including warnings on 64 platforms, only) --------------------------------------------------------------------------- Version 1.19.12 (rgerhards), 2007-12-03 - cleaned up the build system (thanks to Michael Biebl for the patch) - fixed a bug where ommysql was still not compiled with -pthread option --------------------------------------------------------------------------- Version 1.19.11 (rgerhards), 2007-11-29 - applied -pthread option to build when building for multi-threading mode hopefully solves an issue with segfaulting --------------------------------------------------------------------------- Version 1.19.10 (rgerhards), 2007-10-19 - introdcued the new ":modulename:" syntax for calling module actions in selector lines; modified ommysql to support it. This is primarily an aid for further modules and a prequisite to actually allow third party modules to be created. - minor fix in slackware startup script, "-r 0" is now "-r0" - updated rsyslogd doc set man page; now in html format - undid creation of a separate thread for the main loop -- this did not turn out to be needed or useful, so reduce complexity once again. - added doc fixes provided by Michael Biebl - thanks --------------------------------------------------------------------------- Version 1.19.9 (rgerhards), 2007-10-12 - now packaging system which again contains all components in a single tarball - modularized main() a bit more, resulting in less complex code - experimentally added an additional thread - will see if that affects the segfault bug we experience on some platforms. Note that this change is scheduled to be removed again later. --------------------------------------------------------------------------- Version 1.19.8 (rgerhards), 2007-09-27 - improved repeated message processing - applied patch provided by varmojfekoj to support building ommysql in its own way (now also resides in a plugin subdirectory); ommysql is now a separate package - fixed a bug in cvthname() that lead to message loss if part of the source hostname would have been dropped - created some support for distributing ommysql together with the main rsyslog package. I need to re-think it in the future, but for the time being the current mode is best. I now simply include one additional tarball for ommysql inside the main distribution. I look forward to user feedback on how this should be done best. In the long term, a separate project should be spawend for ommysql, but I'd like to do that only after the plugin interface is fully stable (what it is not yet). --------------------------------------------------------------------------- Version 1.19.7 (rgerhards), 2007-09-25 - added code to handle situations where senders send us messages ending with a NUL character. It is now simply removed. This also caused trailing LF reduction to fail, when it was followed by such a NUL. This is now also handled. - replaced some non-thread-safe function calls by their thread-safe counterparts - fixed a minor memory leak that occured when the %APPNAME% property was used (I think nobody used that in practice) - fixed a bug that caused signal handlers in cvthname() not to be restored when a malicious pointer record was detected and processing of the message been stopped for that reason (this should be really rare and can not be related to the segfault bug we are hunting). - fixed a bug in cvthname that lead to passing a wrong parameter - in practice, this had no impact. - general code cleanup (e.g. compiler warnings, comments) --------------------------------------------------------------------------- Version 1.19.6 (rgerhards), 2007-09-11 - applied patch by varmojfekoj to change signal handling to the new sigaction API set (replacing the depreciated signal() calls and its friends. - fixed a bug that in --enable-debug mode caused an assertion when the discard action was used - cleaned up compiler warnings - applied patch by varmojfekoj to FIX a bug that could cause segfaults if empty properties were processed using modifying options (e.g. space-cc, drop-cc) - fixed man bug: rsyslogd supports -l option --------------------------------------------------------------------------- Version 1.19.5 (rgerhards), 2007-09-07 - changed part of the CStr interface so that better error tracking is provided and the calling sequence is more intuitive (there were invalid calls based on a too-weired interface) - (hopefully) fixed some remaining bugs rooted in wrong use of the CStr class. These could lead to program abort. - applied patch by varmojfekoj two fix two potential segfault situations - added $ModDir config directive - modified $ModLoad so that an absolute path may be specified as module name (e.g. /rsyslog/ommysql.so) --------------------------------------------------------------------------- Version 1.19.4 (rgerhards/varmojfekoj), 2007-09-04 - fixed a number of small memory leaks - thanks varmojfekoj for patching - fixed an issue with CString class that could lead to rsyslog abort in tplToString() - thanks varmojfekoj for patching - added a man-version of the config file documenation - thanks to Michel Samia for providing the man file - fixed bug: a template like this causes an infinite loop: $template opts,"%programname:::a,b%" thanks varmojfekoj for the patch - fixed bug: case changing options crash freeing the string pointer because they modify it: $template opts2,"%programname::1:lowercase%" thanks varmojfekoj for the patch --------------------------------------------------------------------------- Version 1.19.3 (mmeckelein/varmojfekoj), 2007-08-31 - small mem leak fixed (after calling parseSelectorAct) - Thx varmojkekoj - documentation section "Regular File" und "Blocks" updated - solved an issue with dynamic file generation - Once again many thanks to varmojfekoj - the negative selector for program name filter (Blocks) does not work as expected - Thanks varmojfekoj for patching - added forwarding information to sysklogd (requires special template) to config doc --------------------------------------------------------------------------- Version 1.19.2 (mmeckelein/varmojfekoj), 2007-08-28 - a specifically formed message caused a segfault - Many thanks varmojfekoj for providing a patch - a typo and a weird condition are fixed in msg.c - Thanks again varmojfekoj - on file creation the file was always owned by root:root. This is fixed now - Thanks ypsa for solving this issue --------------------------------------------------------------------------- Version 1.19.1 (mmeckelein), 2007-08-22 - a bug that caused a high load when a TCP/UDP connection was closed is fixed now - Thanks mildew for solving this issue - fixed a bug which caused a segfault on reinit - Thx varmojfekoj for the patch - changed the hardcoded module path "/lib/rsyslog" to $(pkglibdir) in order to avoid trouble e.g. on 64 bit platforms (/lib64) - many thanks Peter Vrabec and darix, both provided a patch for solving this issue - enhanced the unloading of modules - thanks again varmojfekoj - applied a patch from varmojfekoj which fixes various little things in MySQL output module --------------------------------------------------------------------------- Version 1.19.0 (varmojfekoj/rgerhards), 2007-08-16 - integrated patch from varmojfekoj to make the mysql module a loadable one many thanks for the patch, MUCH appreciated --------------------------------------------------------------------------- Version 1.18.2 (rgerhards), 2007-08-13 - fixed a bug in outchannel code that caused templates to be incorrectly parsed - fixed a bug in ommysql that caused a wrong ";template" missing message - added some code for unloading modules; not yet fully complete (and we do not yet have loadable modules, so this is no problem) - removed debian subdirectory by request of a debian packager (this is a special subdir for debian and there is also no point in maintaining it when there is a debian package available - so I gladly did this) in some cases - improved overall doc quality (some pages were quite old) and linked to more of the online resources. - improved /contrib/delete_mysql script by adding a host option and some other minor modifications --------------------------------------------------------------------------- Version 1.18.1 (rgerhards), 2007-08-08 - applied a patch from varmojfekoj which solved a potential segfault of rsyslogd on HUP - applied patch from Michel Samia to fix compilation when the pthreads feature is disabled - some code cleanup (moved action object to its own file set) - add config directive $MainMsgQueueSize, which now allows to configure the queue size dynamically - all compile-time settings are now shown in rsyslogd -v, not just the active ones - enhanced performance a little bit more - added config file directive $ActionResumeInterval - fixed a bug that prevented compilation under debian sid - added a contrib directory for user-contributed useful things --------------------------------------------------------------------------- Version 1.18.0 (rgerhards), 2007-08-03 - rsyslog now supports fallback actions when an action did not work. This is a great feature e.g. for backup database servers or backup syslog servers - modified rklogd to only change the console log level if -c is specified - added feature to use multiple actions inside a single selector - implemented $ActionExecOnlyWhenPreviousIsSuspended config directive - error messages during startup are now spit out to the configured log destinations --------------------------------------------------------------------------- Version 1.17.6 (rgerhards), 2007-08-01 - continued to work on output module modularization - basic stage of this work is now FINISHED - fixed bug in OMSRcreate() - always returned SR_RET_OK - fixed a bug that caused ommysql to always complain about missing templates - fixed a mem leak in OMSRdestruct - freeing the object itself was forgotten - thanks to varmojfekoj for the patch - fixed a memory leak in syslogd/init() that happend when the config file could not be read - thanks to varmojfekoj for the patch - fixed insufficient memory allocation in addAction() and its helpers. The initial fix and idea was developed by mildew, I fine-tuned it a bit. Thanks a lot for the fix, I'd probably had pulled out my hair to find the bug... - added output of config file line number when a parsing error occured - fixed bug in objomsr.c that caused program to abort in debug mode with an invalid assertion (in some cases) - fixed a typo that caused the default template for MySQL to be wrong. thanks to mildew for catching this. - added configuration file command $DebugPrintModuleList and $DebugPrintCfSysLineHandlerList - fixed an invalid value for the MARK timer - unfortunately, there was a testing aid left in place. This resulted in quite frequent MARK messages - added $IncludeConfig config directive - applied a patch from mildew to prevent rsyslogd from freezing under heavy load. This could happen when the queue was full. Now, we drop messages but rsyslogd remains active. --------------------------------------------------------------------------- Version 1.17.5 (rgerhards), 2007-07-30 - continued to work on output module modularization - fixed a missing file bug - thanks to Andrea Montanari for reporting this problem - fixed a problem with shutting down the worker thread and freeing the selector_t list - this caused messages to be lost, because the message queue was not properly drained before the selectors got destroyed. --------------------------------------------------------------------------- Version 1.17.4 (rgerhards), 2007-07-27 - continued to work on output module modularization - fixed a situation where rsyslogd could create zombie processes thanks to mildew for the patch - applied patch from Michel Samia to fix compilation when NOT compiled for pthreads --------------------------------------------------------------------------- Version 1.17.3 (rgerhards), 2007-07-25 - continued working on output module modularization - fixed a bug that caused rsyslogd to segfault on exit (and probably also on HUP), when there was an unsent message in a selector that required forwarding and the dns lookup failed for that selector (yes, it was pretty unlikely to happen;)) thanks to varmojfekoj <varmojfekoj@gmail.com> for the patch - fixed a memory leak in config file parsing and die() thanks to varmojfekoj <varmojfekoj@gmail.com> for the patch - rsyslogd now checks on startup if it is capable to performa any work at all. If it cant, it complains and terminates thanks to Michel Samia for providing the patch! - fixed a small memory leak when HUPing syslogd. The allowed sender list now gets freed. thanks to mildew for the patch. - changed the way error messages in early startup are logged. They now do no longer use the syslogd code directly but are rather send to stderr. --------------------------------------------------------------------------- Version 1.17.2 (rgerhards), 2007-07-23 - made the port part of the -r option optional. Needed for backward compatibility with sysklogd - replaced system() calls with something more reasonable. Please note that this might break compatibility with some existing configuration files. We accept this in favour of the gained security. - removed a memory leak that could occur if timegenerated was used in RFC 3164 format in templates - did some preparation in msg.c for advanced multithreading - placed the hooks, but not yet any active code - worked further on modularization - added $ModLoad MySQL (dummy) config directive - added DropTrailingLFOnReception config directive --------------------------------------------------------------------------- Version 1.17.1 (rgerhards), 2007-07-20 - fixed a bug that caused make install to install rsyslogd and rklogd under the wrong names - fixed bug that caused $AllowedSenders to handle IPv6 scopes incorrectly; also fixed but that could grabble $AllowedSender wildcards. Thanks to mildew@gmail.com for the patch - minor code cleanup - thanks to Peter Vrabec for the patch - fixed minimal memory leak on HUP (caused by templates) thanks to varmojfekoj <varmojfekoj@gmail.com> for the patch - fixed another memory leak on HUPing and on exiting rsyslogd again thanks to varmojfekoj <varmojfekoj@gmail.com> for the patch - code cleanup (removed compiler warnings) - fixed portability bug in configure.ac - thanks to Bartosz Kuźma for patch - moved msg object into its own file set - added the capability to continue trying to write log files when the file system is full. Functionality based on patch by Martin Schulze to sysklogd package. --------------------------------------------------------------------------- Version 1.17.0 (RGer), 2007-07-17 - added $RepeatedLineReduction config parameter - added $EscapeControlCharactersOnReceive config parameter - added $ControlCharacterEscapePrefix config parameter - added $DirCreateMode config parameter - added $CreateDirs config parameter - added $DebugPrintTemplateList config parameter - added $ResetConfigVariables config parameter - added $FileOwner config parameter - added $FileGroup config parameter - added $DirOwner config parameter - added $DirGroup config parameter - added $FailOnChownFailure config parameter - added regular expression support to the filter engine thanks to Michel Samia for providing the patch! - enhanced $AllowedSender functionality. Credits to mildew@gmail.com for the patch doing that - added IPv6 support - allowed DNS hostnames - allowed DNS wildcard names - added new option $DropMsgsWithMaliciousDnsPTRRecords - added autoconf so that rfc3195d, rsyslogd and klogd are stored to /sbin - added capability to auto-create directories with dynaFiles --------------------------------------------------------------------------- Version 1.16.0 (RGer/Peter Vrabec), 2007-07-13 - The Friday, 13th Release ;) - build system switched to autotools - removed SYSV preprocessor macro use, replaced with autotools equivalents - fixed a bug that caused rsyslogd to segfault when TCP listening was disabled and it terminated - added new properties "syslogfacility-text" and "syslogseverity-text" thanks to varmojfekoj <varmojfekoj@gmail.com> for the patch - added the -x option to disable hostname dns reslution thanks to varmojfekoj <varmojfekoj@gmail.com> for the patch - begun to better modularize syslogd.c - this is an ongoing project; moved type definitions to a separate file - removed some now-unused fields from struct filed - move file size limit fields in struct field to the "right spot" (the file writing part of the union - f_un.f_file) - subdirectories linux and solaris are no longer part of the distribution package. This is not because we cease support for them, but there are no longer any files in them after the move to autotools --------------------------------------------------------------------------- Version 1.15.1 (RGer), 2007-07-10 - fixed a bug that caused a dynaFile selector to stall when there was an open error with one file - improved template processing for dynaFiles; templates are now only looked up during initialization - speeds up processing - optimized memory layout in struct filed when compiled with MySQL support - fixed a bug that caused compilation without SYSLOG_INET to fail - re-enabled the "last message repeated n times" feature. This feature was not taken care of while rsyslogd evolved from sysklogd and it was more or less defunct. Now it is fully functional again. - added system properties: $NOW, $YEAR, $MONTH, $DAY, $HOUR, $MINUTE - fixed a bug in iovAsString() that caused a memory leak under stress conditions (most probably memory shortage). This was unlikely to ever happen, but it doesn't hurt doing it right - cosmetic: defined type "uchar", change all unsigned chars to uchar --------------------------------------------------------------------------- Version 1.15.0 (RGer), 2007-07-05 - added ability to dynamically generate file names based on templates and thus properties. This was a much-requested feature. It makes life easy when it e.g. comes to splitting files based on the sender address. - added $umask and $FileCreateMode config file directives - applied a patch from Bartosz Kuzma to compile cleanly under NetBSD - checks for extra (unexpected) characters in system config file lines have been added - added IPv6 documentation - was accidently missing from CVS - begun to change char to unsigned char --------------------------------------------------------------------------- Version 1.14.2 (RGer), 2007-07-03 ** this release fixes all known nits with IPv6 ** - restored capability to do /etc/service lookup for "syslog" service when -r 0 was given - documented IPv6 handling of syslog messages - integrate patch from Bartosz Kuźma to make rsyslog compile under Solaris again (the patch replaced a strndup() call, which is not available under Solaris - improved debug logging when waiting on select - updated rsyslogd man page with new options (-46A) --------------------------------------------------------------------------- Version 1.14.1 (RGer/Peter Vrabec), 2007-06-29 - added Peter Vrabec's patch for IPv6 TCP - prefixed all messages send to stderr in rsyslogd with "rsyslogd: " --------------------------------------------------------------------------- Version 1.14.0 (RGer/Peter Vrabec), 2007-06-28 - Peter Vrabec provided IPv6 for rsyslog, so we are now IPv6 enabled IPv6 Support is currently for UDP only, TCP is to come soon. AllowedSender configuration does not yet work for IPv6. - fixed code in iovCreate() that broke C's strict aliasing rules - fixed some char/unsigned char differences that forced the compiler to spit out warning messages - updated the Red Hat init script to fix a known issue (thanks to Peter Vrabec) --------------------------------------------------------------------------- Version 1.13.5 (RGer), 2007-06-22 - made the TCP session limit configurable via command line switch now -t <port>,<max sessions> - added man page for rklogd(8) (basically a copy from klogd, but now there is one...) - fixed a bug that caused internal messages (e.g. rsyslogd startup) to appear without a tag. - removed a minor memory leak that occurred when TAG processing requalified a HOSTNAME to be a TAG (and a TAG already was set). - removed potential small memory leaks in MsgSet***() functions. There would be a leak if a property was re-set, something that happened extremely seldom. --------------------------------------------------------------------------- Version 1.13.4 (RGer), 2007-06-18 - added a new property "PRI-text", which holds the PRI field in textual form (e.g. "syslog.info") - added alias "syslogseverity" for "syslogpriority", which is a misleading property name that needs to stay for historical reasons (and backward-compatility) - added doc on how to record PRI value in log file - enhanced signal handling in klogd, including removal of an unsafe call to the logging system during signal handling --------------------------------------------------------------------------- Version 1.13.3 (RGer), 2007-06-15 - create a version of syslog.c from scratch. This is now - highly optimized for rsyslog - removes an incompatible license problem as the original version had a BSD license with advertising clause - fixed in the regard that rklogd will continue to work when rsysogd has been restarted (the original version, as well as sysklogd, will remain silent then) - solved an issue with an extra NUL char at message end that the original version had - applied some changes to klogd to care for the new interface - fixed a bug in syslogd.c which prevented compiling under debian --------------------------------------------------------------------------- Version 1.13.2 (RGer), 2007-06-13 - lib order in makefile patched to facilitate static linking - thanks to Bennett Todd for providing the patch - Integrated a patch from Peter Vrabec (pvrabec@redheat.com): - added klogd under the name of rklogd (remove dependency on original sysklogd package - createDB.sql now in UTF - added additional config files for use on Red Hat --------------------------------------------------------------------------- Version 1.13.1 (RGer), 2007-02-05 - changed the listen backlog limit to a more reasonable value based on the maximum number of TCP connections configurd (10% + 5) - thanks to Guy Standen for the hint (actually, the limit was 5 and that was a left-over from early testing). - fixed a bug in makefile which caused DB-support to be disabled when NETZIP support was enabled - added the -e option to allow transmission of every message to remote hosts (effectively turns off duplicate message suppression) - (somewhat) improved memory consumption when compiled with MySQL support - looks like we fixed an incompatibility with MySQL 5.x and above software At least in one case, the remote server name was destroyed, leading to a connection failure. The new, improved code does not have this issue and so we see this as solved (the new code is generally somewhat better, so there is a good chance we fixed this incompatibility). --------------------------------------------------------------------------- Version 1.13.0 (RGer), 2006-12-19 - added '$' as ToPos proptery replacer specifier - means "up to the end of the string" - property replacer option "escape-cc", "drop-cc" and "space-cc" added - changed the handling of \0 characters inside syslog messages. We now consistently escape them to "#000". This is somewhat recommended in the draft-ietf-syslog-protocol-19 draft. While the real recomendation is to not escape any characters at all, we can not do this without considerable modification of the code. So we escape it to "#000", which is consistent with a sample found in the Internet-draft. - removed message glue logic (see printchopped() comment for details) Also caused removal of parts table and thus some improvements in memory usage. - changed the default MAXLINE to 2048 to take care of recent syslog standardization efforts (can easily be changed in syslogd.c) - added support for byte-counted TCP syslog messages (much like syslog-transport-tls-05 Internet Draft). This was necessary to support compression over TCP. - added support for receiving compressed syslog messages - added support for sending compressed syslog messages - fixed a bug where the last message in a syslog/tcp stream was lost if it was not properly terminated by a LF character --------------------------------------------------------------------------- Version 1.12.3 (RGer), 2006-10-04 - implemented some changes to support Solaris (but support is not yet complete) - commented out (via #if 0) some methods that are currently not being use but should be kept for further us - added (interim) -u 1 option to turn off hostname and tag parsing - done some modifications to better support Fedora - made the field delimiter inside property replace configurable via template - fixed a bug in property replacer: if fields were used, the delimitor became part of the field. Up until now, this was barely noticable as the delimiter as TAB only and thus invisible to a human. With other delimiters available now, it quickly showed up. This bug fix might cause some grief to existing installations if they used the extra TAB for whatever reasons - sorry folks... Anyhow, a solution is easy: just add a TAB character contstant into your template. Thus, there has no attempt been made to do this in a backwards-compatible way. --------------------------------------------------------------------------- Version 1.12.2 (RGer), 2006-02-15 - fixed a bug in the RFC 3339 date formatter. An extra space was added after the actual timestamp - added support for providing high-precision RFC3339 timestamps for (rsyslogd-)internally-generated messages - very (!) experimental support for syslog-protocol internet draft added (the draft is experimental, the code is solid ;)) - added support for field-extracting in the property replacer - enhanced the legacy-syslog parser so that it can interpret messages that do not contain a TIMESTAMP - fixed a bug that caused the default socket (usually /dev/log) to be opened even when -o command line option was given - fixed a bug in the Debian sample startup script - it caused rsyslogd to listen to remote requests, which it shouldn't by default --------------------------------------------------------------------------- Version 1.12.1 (RGer), 2005-11-23 - made multithreading work with BSD. Some signal-handling needed to be restructured. Also, there might be a slight delay of up to 10 seconds when huping and terminating rsyslogd under BSD - fixed a bug where a NULL-pointer was passed to printf() in logmsg(). - fixed a bug during "make install" where rc3195d was not installed Thanks to Bennett Todd for spotting this. - fixed a bug where rsyslogd dumped core when no TAG was found in the received message - enhanced message parser so that it can deal with missing hostnames in many cases (may not be totally fail-safe) - fixed a bug where internally-generated messages did not have the correct TAG --------------------------------------------------------------------------- Version 1.12.0 (RGer), 2005-10-26 - moved to a multi-threaded design. single-threading is still optionally available. Multi-threading is experimental! - fixed a potential race condition. In the original code, marking was done by an alarm handler, which could lead to all sorts of bad things. This has been changed now. See comments in syslogd.c/domark() for details. - improved debug output for property-based filters - not a code change, but: I have checked all exit()s to make sure that none occurs once rsyslogd has started up. Even in unusual conditions (like low-memory conditions) rsyslogd somehow remains active. Of course, it might loose a message or two, but at least it does not abort and it can also recover when the condition no longer persists. - fixed a bug that could cause loss of the last message received immediately before rsyslogd was terminated. - added comments on thread-safety of global variables in syslogd.c - fixed a small bug: spurios printf() when TCP syslog was used - fixed a bug that causes rsyslogd to dump core on termination when one of the selector lines did not receive a message during the run (very unlikely) - fixed an one-too-low memory allocation in the TCP sender. Could result in rsyslogd dumping core. - fixed a bug with regular expression support (thanks to Andres Riancho) - a little bit of code restructuring (especially main(), which was horribly large) --------------------------------------------------------------------------- Version 1.11.1 (RGer), 2005-10-19 - support for BSD-style program name and host blocks - added a new property "programname" that can be used in templates - added ability to specify listen port for rfc3195d - fixed a bug that rendered the "startswith" comparison operation unusable. - changed more functions to "static" storage class to help compiler optimize (should have been static in the first place...) - fixed a potential memory leak in the string buffer class destructor. As the destructur was previously never called, the leak did not actually appear. - some internal restructuring in anticipation/preparation of minimal multi-threading support - rsyslogd still shares some code with the sysklogd project. Some patches for this shared code have been brought over from the sysklogd CVS. --------------------------------------------------------------------------- Version 1.11.0 (RGer), 2005-10-12 - support for receiving messages via RFC 3195; added rfc3195d for that purpose - added an additional guard to prevent rsyslogd from aborting when the 2gb file size limit is hit. While a user can configure rsyslogd to handle such situations, it would abort if that was not done AND large file support was not enabled (ok, this is hopefully an unlikely scenario) - fixed a bug that caused additional Unix domain sockets to be incorrectly processed - could lead to message loss in extreme cases --------------------------------------------------------------------------- Version 1.10.2 (RGer), 2005-09-27 - added comparison operations in property-based filters: * isequal * startswith - added ability to negate all property-based filter comparison operations by adding a !-sign right in front of the operation name - added the ability to specify remote senders for UDP and TCP received messages. Allows to block all but well-known hosts - changed the $-config line directives to be case-INsensitive - new command line option -w added: "do not display warnings if messages from disallowed senders are received" - fixed a bug that caused rsyslogd to dump core when the compare value was not quoted in property-based filters - fixed a bug in the new CStr compare function which lead to invalid results (fortunately, this function was not yet used widely) - added better support for "debugging" rsyslog.conf property filters (only if -d switch is given) - changed some function definitions to static, which eventually enables some compiler optimizations - fixed a bug in MySQL code; when a SQL error occured, rsyslogd could run in a tight loop. This was due to invalid sequence of error reporting and is now fixed. --------------------------------------------------------------------------- Version 1.10.1 (RGer), 2005-09-23 - added the ability to execute a shell script as an action. Thanks to Bjoern Kalkbrenner for providing the code! - fixed a bug in the MySQL code; due to the bug the automatic one-time retry after an error did not happen - this lead to error message in cases where none should be seen (e.g. after a MySQL restart) - fixed a security issue with SQL-escaping in conjunction with non-(SQL-)standard MySQL features. --------------------------------------------------------------------------- Version 1.10.0 (RGer), 2005-09-20 REMINDER: 1.10 is the first unstable version if the 1.x series! - added the capability to filter on any property in selector lines (not just facility and priority) - changed stringbuf into a new counted string class - added support for a "discard" action. If a selector line with discard (~ character) is found, no selector lines *after* that line will be processed. - thanks to Andres Riancho, regular expression support has been added to the template engine - added the FROMHOST property in the template processor, which could previously not be obtained. Thanks to Cristian Testa for pointing this out and even providing a fix. - added display of compile-time options to -v output - performance improvement for production build - made some checks to happen only during debug mode - fixed a problem with compiling on SUSE and - while doing so - removed the socket call to set SO_BSDCOMPAT in cases where it is obsolete. --------------------------------------------------------------------------- Version 1.0.4 (RGer), 2006-02-01 - a small but important fix: the tcp receiver had two forgotten printf's in it that caused a lot of unnecessary output to stdout. This was important enough to justify a new release --------------------------------------------------------------------------- Version 1.0.3 (RGer), 2005-11-14 - added an additional guard to prevent rsyslogd from aborting when the 2gb file size limit is hit. While a user can configure rsyslogd to handle such situations, it would abort if that was not done AND large file support was not enabled (ok, this is hopefully an unlikely scenario) - fixed a bug that caused additional Unix domain sockets to be incorrectly processed - could lead to message loss in extreme cases - applied some patches available from the sysklogd project to code shared from there - fixed a bug that causes rsyslogd to dump core on termination when one of the selector lines did not receive a message during the run (very unlikely) - fixed an one-too-low memory allocation in the TCP sender. Could result in rsyslogd dumping core. - fixed a bug in the TCP sender that caused the retry logic to fail after an error or receiver overrun - fixed a bug in init() that could lead to dumping core - fixed a bug that could lead to dumping core when no HOSTNAME or no TAG was present in the syslog message --------------------------------------------------------------------------- Version 1.0.2 (RGer), 2005-10-05 - fixed an issue with MySQL error reporting. When an error occured, the MySQL driver went into an endless loop (at least in most cases). --------------------------------------------------------------------------- Version 1.0.1 (RGer), 2005-09-23 - fixed a security issue with SQL-escaping in conjunction with non-(SQL-)standard MySQL features. --------------------------------------------------------------------------- Version 1.0.0 (RGer), 2005-09-12 - changed install doc to cover daily cron scripts - a trouble source - added rc script for slackware (provided by Chris Elvidge - thanks!) - fixed a really minor bug in usage() - the -r option was still reported as without the port parameter --------------------------------------------------------------------------- Version 0.9.8 (RGer), 2005-09-05 - made startup and shutdown message more consistent and included the pid, so that they can be easier correlated. Used syslog-protocol structured data format for this purpose. - improved config info in startup message, now tells not only if it is listening remote on udp, but also for tcp. Also includes the port numbers. The previous startup message was misleading, because it did not say "remote reception" if rsyslogd was only listening via tcp (but not via udp). - added a "how can you help" document to the doc set --------------------------------------------------------------------------- Version 0.9.7 (RGer), 2005-08-15 - some of the previous doc files (like INSTALL) did not properly reflect the changes to the build process and the new doc. Fixed that. - changed syslogd.c so that when compiled without database support, an error message is displayed when a database action is detected in the config file (previously this was used as an user rule ;)) - fixed a bug in the os-specific Makefiles which caused MySQL support to not be compiled, even if selected --------------------------------------------------------------------------- Version 0.9.6 (RGer), 2005-08-09 - greatly enhanced documentation. Now available in html format in the "doc" folder and FreeBSD. Finally includes an install howto. - improved MySQL error messages a little - they now show up as log messages, too (formerly only in debug mode) - added the ability to specify the listen port for udp syslog. WARNING: This introduces an incompatibility. Formerly, udp syslog was enabled by the -r command line option. Now, it is "-r [port]", which is consistent with the tcp listener. However, just -r will now return an error message. - added sample startup scripts for Debian and FreeBSD - added support for easy feature selection in the makefile. Un- fortunately, this also means I needed to spilt the make file for different OS and distros. There are some really bad syntax differences between FreeBSD and Linux make. --------------------------------------------------------------------------- Version 0.9.5 (RGer), 2005-08-01 - the "semicolon bug" was actually not (fully) solved in 0.9.4. One part of the bug was solved, but another still existed. This one is fixed now, too. - the "semicolon bug" actually turned out to be a more generic bug. It appeared whenever an invalid template name was given. With some selector actions, rsyslogd dumped core, with other it "just" had a small ressource leak with others all worked well. These anomalies are now fixed. Note that they only appeared during system initaliziation once the system was running, nothing bad happened. - improved error reporting for template errors on startup. They are now shown on the console and the start-up tty. Formerly, they were only visible in debug mode. - support for multiple instances of rsyslogd on a single machine added - added new option "-o" --> omit local unix domain socket. This option enables rsyslogd NOT to listen to the local socket. This is most helpful when multiple instances of rsyslogd (or rsyslogd and another syslogd) shall run on a single system. - added new option "-i <pidfile>" which allows to specify the pidfile. This is needed when multiple instances of rsyslogd are to be run. - the new project home page is now online at www.rsyslog.com --------------------------------------------------------------------------- Version 0.9.4 (RGer), 2005-07-25 - finally added the TCP sender. It now supports non-blocking mode, no longer disabling message reception during connect. As it is now, it is usable in production. The code could be more sophisticated, but I've kept it short in anticipation of the move to liblogging, which will lead to the removal of the code just written ;) - the "exiting on signal..." message still had the "syslogd" name in it. Changed this to "rsyslogd", as we do not have a large user base yet, this should pose no problem. - fixed "the semiconlon" bug. rsyslogd dumped core if a write-db action was specified but no semicolon was given after the password (an empty template was ok, but the semicolon needed to be present). - changed a default for traditional output format. During testing, it was seen that the timestamp written to file in default format was the time of message reception, not the time specified in the TIMESTAMP field of the message itself. Traditionally, the message TIMESTAMP is used and this has been changed now. --------------------------------------------------------------------------- Version 0.9.3 (RGer), 2005-07-19 - fixed a bug in the message parser. In June, the RFC 3164 timestamp was not correctly parsed (yes, only in June and some other months, see the code comment to learn why...) - added the ability to specify the destination port when forwarding syslog messages (both for TCP and UDP) - added an very experimental TCP sender (activated by @@machine:port in config). This is not yet for production use. If the receiver is not alive, rsyslogd will wait quite some time until the connection request times out, which most probably leads to loss of incoming messages. --------------------------------------------------------------------------- Version 0.9.2 (RGer), around 2005-07-06 - I intended to change the maxsupported message size to 32k to support IHE - but given the memory inefficiency in the usual use cases, I have not done this. I have, however, included very specific instructions on how to do this in the source code. I have also done some testing with 32k messages, so you can change the max size without taking too much risk. - added a syslog/tcp receiver; we now can receive messages via plain tcp, but we can still send only via UDP. The syslog/tcp receiver is the primary enhancement of this release. - slightly changed some error messages that contained a spurios \n at the end of the line (which gives empty lines in your log...) --------------------------------------------------------------------------- Version 0.9.1 (RGer) - fixed code so that it compiles without errors under FreeBSD - removed now unused function "allocate_log()" from syslogd.c - changed the make file so that it contains more defines for different environments (in the long term, we need a better system for disabling/enabling features...) - changed some printf's printing off_t types to %lld and explicit (long long) casts. I tried to figure out the exact type, but did not succeed in this. In the worst case, ultra-large peta- byte files will now display funny informational messages on rollover, something I think we can live with for the neersion 3.11.2 (rgerhards), 2008-02-?? --------------------------------------------------------------------------- Version 3.11.1 (rgerhards), 2008-02-12 - SNMP trap sender added thanks to Andre Lorbach (omsnmp) - added input-plugin interface specification in form of a (copy) template input module - applied documentation fix by Michael Biebl -- many thanks! - bugfix: immark did not have MARK flags set... - added x-info field to rsyslogd startup/shutdown message. Hopefully points users to right location for further info (many don't even know they run rsyslog ;)) - bugfix: trailing ":" of tag was lost while parsing legacy syslog messages without timestamp - thanks to Anders Blomdell for providing a patch! - fixed a bug in stringbuf.c related to STRINGBUF_TRIM_ALLOCSIZE, which wasn't supposed to be used with rsyslog. Put a warning message up that tells this feature is not tested and probably not worth the effort. Thanks to Anders Blomdell fro bringing this to our attention - somewhat improved performance of string buffers - fixed bug that caused invalid treatment of tabs (HT) in rsyslog.conf - bugfix: setting for $EscapeCopntrolCharactersOnReceive was not properly initialized - clarified usage of space-cc property replacer option - improved abort diagnostic handler - some initial effort for malloc/free runtime debugging support - bugfix: using dynafile actions caused rsyslogd abort - fixed minor man errors thanks to Michael Biebl --------------------------------------------------------------------------- Version 3.11.0 (rgerhards), 2008-01-31 - implemented queued actions - implemented simple rate limiting for actions - implemented deliberate discarding of lower priority messages over higher priority ones when a queue runs out of space - implemented disk quotas for disk queues - implemented the $ActionResumeRetryCount config directive - added $ActionQueueFilename config directive - added $ActionQueueSize config directive - added $ActionQueueHighWaterMark config directive - added $ActionQueueLowWaterMark config directive - added $ActionQueueDiscardMark config directive - added $ActionQueueDiscardSeverity config directive - added $ActionQueueCheckpointInterval config directive - added $ActionQueueType config directive - added $ActionQueueWorkerThreads config directive - added $ActionQueueTimeoutshutdown config directive - added $ActionQueueTimeoutActionCompletion config directive - added $ActionQueueTimeoutenQueue config directive - added $ActionQueueTimeoutworkerThreadShutdown config directive - added $ActionQueueWorkerThreadMinimumMessages config directive - added $ActionQueueMaxFileSize config directive - added $ActionQueueSaveonShutdown config directive - addded $ActionQueueDequeueSlowdown config directive - addded $MainMsgQueueDequeueSlowdown config directive - bugfix: added forgotten docs to package - improved debugging support - fixed a bug that caused $MainMsgQueueCheckpointInterval to work incorrectly - when a long-running action needs to be cancelled on shutdown, the message that was processed by it is now preserved. This finishes support for guaranteed delivery of messages (if the output supports it, of course) - fixed bug in output module interface, see http://sourceforge.net/tracker/index.php?func=detail&aid=1881008&group_id=123448&atid=696552 - changed the ommysql output plugin so that the (lengthy) connection initialization now takes place in message processing. This works much better with the new queued action mode (fast startup) - fixed a bug that caused a potential hang in file and fwd output module varmojfekoj provided the patch - many thanks! - bugfixed stream class offset handling on 32bit platforms --------------------------------------------------------------------------- Version 3.10.3 (rgerhards), 2008-01-28 - fixed a bug with standard template definitions (not a big deal) - thanks to varmojfekoj for spotting it - run-time instrumentation added - implemented disk-assisted queue mode, which enables on-demand disk spooling if the queue's in-memory queue is exhausted - implemented a dynamic worker thread pool for processing incoming messages; workers are started and shut down as need arises - implemented a run-time instrumentation debug package - implemented the $MainMsgQueueSaveOnShutdown config directive - implemented the $MainMsgQueueWorkerThreadMinimumMessages config directive - implemented the $MainMsgQueueTimeoutWorkerThreadShutdown config directive --------------------------------------------------------------------------- Version 3.10.2 (rgerhards), 2008-01-14 - added the ability to keep stop rsyslogd without the need to drain the main message queue. In disk queue mode, rsyslog continues to run from the point where it stopped. In case of a system failure, it continues to process messages from the last checkpoint. - fixed a bug that caused a segfault on startup when no $WorkDir directive was specified in rsyslog.conf - provided more fine-grain control over shutdown timeouts and added a way to specify the enqueue timeout when the main message queue is full - implemented $MainMsgQueueCheckpointInterval config directive - implemented $MainMsgQueueTimeoutActionCompletion config directive - implemented $MainMsgQueueTimeoutEnqueue config directive - implemented $MainMsgQueueTimeoutShutdown config directive --------------------------------------------------------------------------- Version 3.10.1 (rgerhards), 2008-01-10 - implemented the "disk" queue mode. However, it currently is of very limited use, because it does not support persistence over rsyslogd runs. So when rsyslogd is stopped, the queue is drained just as with the in-memory queue modes. Persistent queues will be a feature of the next release. - performance-optimized string class, should bring an overall improvement - fixed a memory leak in imudp -- thanks to varmojfekoj for the patch - fixed a race condition that could lead to a rsyslogd hang when during HUP or termination - done some doc updates - added $WorkDirectory config directive - added $MainMsgQueueFileName config directive - added $MainMsgQueueMaxFileSize config directive --------------------------------------------------------------------------- Version 3.10.0 (rgerhards), 2008-01-07 - implemented input module interface and initial input modules - enhanced threading for input modules (each on its own thread now) - ability to bind UDP listeners to specific local interfaces/ports and ability to run multiple of them concurrently - added ability to specify listen IP address for UDP syslog server - license changed to GPLv3 - mark messages are now provided by loadble module immark - rklogd is no longer provided. Its functionality has now been taken over by imklog, a loadable input module. This offers a much better integration into rsyslogd and makes sure that the kernel logger process is brought up and down at the appropriate times - enhanced $IncludeConfig directive to support wildcard characters (thanks to Michael Biebl) - all inputs are now implemented as loadable plugins - enhanced threading model: each input module now runs on its own thread - enhanced message queue which now supports different queueing methods (among others, this can be used for performance fine-tuning) - added a large number of new configuration directives for the new input modules - enhanced multi-threading utilizing a worker thread pool for the main message queue - compilation without pthreads is no longer supported - much cleaner code due to new objects and removal of single-threading mode --------------------------------------------------------------------------- Version 2.0.1 STABLE (rgerhards), 2008-01-24 - fixed a bug in integer conversion - but this function was never called, so it is not really a useful bug fix ;) - fixed a bug with standard template definitions (not a big deal) - thanks to varmojfekoj for spotting it - fixed a bug that caused a potential hang in file and fwd output module varmojfekoj provided the patch - many thanks! --------------------------------------------------------------------------- Version 2.0.0 STABLE (rgerhards), 2008-01-02 - re-release of 1.21.2 as STABLE with no modifications except some doc updates --------------------------------------------------------------------------- Version 1.21.2 (rgerhards), 2007-12-28 - created a gss-api output module. This keeps GSS-API code and TCP/UDP code separated. It is also important for forward- compatibility with v3. Please note that this change breaks compatibility with config files created for 1.21.0 and 1.21.1 - this was considered acceptable. - fixed an error in forwarding retry code (could lead to message corruption but surfaced very seldom) - increased portability for older platforms (AI_NUMERICSERV moved) - removed socket leak in omfwd.c - cross-platform patch for GSS-API compile problem on some platforms thanks to darix for the patch! --------------------------------------------------------------------------- Version 1.21.1 (rgerhards), 2007-12-23 - small doc fix for $IncludeConfig - fixed a bug in llDestroy() - bugfix: fixing memory leak when message queue is full and during parsing. Thanks to varmojfekoj for the patch. - bugfix: when compiled without network support, unix sockets were not properply closed - bugfix: memory leak in cfsysline.c/doGetWord() fixed --------------------------------------------------------------------------- Version 1.21.0 (rgerhards), 2007-12-19 - GSS-API support for syslog/TCP connections was added. Thanks to varmojfekoj for providing the patch with this functionality - code cleanup - enhanced $IncludeConfig directive to support wildcard filenames - changed some multithreading synchronization --------------------------------------------------------------------------- Version 1.20.1 (rgerhards), 2007-12-12 - corrected a debug setting that survived release. Caused TCP connections to be retried unnecessarily often. - When a hostname ACL was provided and DNS resolution for that name failed, ACL processing was stopped at that point. Thanks to mildew for the patch. Fedora Bugzilla: http://bugzilla.redhat.com/show_bug.cgi?id=395911 - fixed a potential race condition, see link for details: http://rgerhards.blogspot.com/2007/12/rsyslog-race-condition.html Note that the probability of problems from this bug was very remote - fixed a memory leak that happend when PostgreSQL date formats were used --------------------------------------------------------------------------- Version 1.20.0 (rgerhards), 2007-12-07 - an output module for postgres databases has been added. Thanks to sur5r for contributing this code - unloading dynamic modules has been cleaned up, we now have a real implementation and not just a dummy "good enough for the time being". - enhanced platform independence - thanks to Bartosz Kuzma and Michael Biebl for their very useful contributions - some general code cleanup (including warnings on 64 platforms, only) --------------------------------------------------------------------------- Version 1.19.12 (rgerhards), 2007-12-03 - cleaned up the build system (thanks to Michael Biebl for the patch) - fixed a bug where ommysql was still not compiled with -pthread option --------------------------------------------------------------------------- Version 1.19.11 (rgerhards), 2007-11-29 - applied -pthread option to build when building for multi-threading mode hopefully solves an issue with segfaulting --------------------------------------------------------------------------- Version 1.19.10 (rgerhards), 2007-10-19 - introdcued the new ":modulename:" syntax for calling module actions in selector lines; modified ommysql to support it. This is primarily an aid for further modules and a prequisite to actually allow third party modules to be created. - minor fix in slackware startup script, "-r 0" is now "-r0" - updated rsyslogd doc set man page; now in html format - undid creation of a separate thread for the main loop -- this did not turn out to be needed or useful, so reduce complexity once again. - added doc fixes provided by Michael Biebl - thanks --------------------------------------------------------------------------- Version 1.19.9 (rgerhards), 2007-10-12 - now packaging system which again contains all components in a single tarball - modularized main() a bit more, resulting in less complex code - experimentally added an additional thread - will see if that affects the segfault bug we experience on some platforms. Note that this change is scheduled to be removed again later. --------------------------------------------------------------------------- Version 1.19.8 (rgerhards), 2007-09-27 - improved repeated message processing - applied patch provided by varmojfekoj to support building ommysql in its own way (now also resides in a plugin subdirectory); ommysql is now a separate package - fixed a bug in cvthname() that lead to message loss if part of the source hostname would have been dropped - created some support for distributing ommysql together with the main rsyslog package. I need to re-think it in the future, but for the time being the current mode is best. I now simply include one additional tarball for ommysql inside the main distribution. I look forward to user feedback on how this should be done best. In the long term, a separate project should be spawend for ommysql, but I'd like to do that only after the plugin interface is fully stable (what it is not yet). --------------------------------------------------------------------------- Version 1.19.7 (rgerhards), 2007-09-25 - added code to handle situations where senders send us messages ending with a NUL character. It is now simply removed. This also caused trailing LF reduction to fail, when it was followed by such a NUL. This is now also handled. - replaced some non-thread-safe function calls by their thread-safe counterparts - fixed a minor memory leak that occured when the %APPNAME% property was used (I think nobody used that in practice) - fixed a bug that caused signal handlers in cvthname() not to be restored when a malicious pointer record was detected and processing of the message been stopped for that reason (this should be really rare and can not be related to the segfault bug we are hunting). - fixed a bug in cvthname that lead to passing a wrong parameter - in practice, this had no impact. - general code cleanup (e.g. compiler warnings, comments) --------------------------------------------------------------------------- Version 1.19.6 (rgerhards), 2007-09-11 - applied patch by varmojfekoj to change signal handling to the new sigaction API set (replacing the depreciated signal() calls and its friends. - fixed a bug that in --enable-debug mode caused an assertion when the discard action was used - cleaned up compiler warnings - applied patch by varmojfekoj to FIX a bug that could cause segfaults if empty properties were processed using modifying options (e.g. space-cc, drop-cc) - fixed man bug: rsyslogd supports -l option --------------------------------------------------------------------------- Version 1.19.5 (rgerhards), 2007-09-07 - changed part of the CStr interface so that better error tracking is provided and the calling sequence is more intuitive (there were invalid calls based on a too-weired interface) - (hopefully) fixed some remaining bugs rooted in wrong use of the CStr class. These could lead to program abort. - applied patch by varmojfekoj two fix two potential segfault situations - added $ModDir config directive - modified $ModLoad so that an absolute path may be specified as module name (e.g. /rsyslog/ommysql.so) --------------------------------------------------------------------------- Version 1.19.4 (rgerhards/varmojfekoj), 2007-09-04 - fixed a number of small memory leaks - thanks varmojfekoj for patching - fixed an issue with CString class that could lead to rsyslog abort in tplToString() - thanks varmojfekoj for patching - added a man-version of the config file documenation - thanks to Michel Samia for providing the man file - fixed bug: a template like this causes an infinite loop: $template opts,"%programname:::a,b%" thanks varmojfekoj for the patch - fixed bug: case changing options crash freeing the string pointer because they modify it: $template opts2,"%programname::1:lowercase%" thanks varmojfekoj for the patch --------------------------------------------------------------------------- Version 1.19.3 (mmeckelein/varmojfekoj), 2007-08-31 - small mem leak fixed (after calling parseSelectorAct) - Thx varmojkekoj - documentation section "Regular File" und "Blocks" updated - solved an issue with dynamic file generation - Once again many thanks to varmojfekoj - the negative selector for program name filter (Blocks) does not work as expected - Thanks varmojfekoj for patching - added forwarding information to sysklogd (requires special template) to config doc --------------------------------------------------------------------------- Version 1.19.2 (mmeckelein/varmojfekoj), 2007-08-28 - a specifically formed message caused a segfault - Many thanks varmojfekoj for providing a patch - a typo and a weird condition are fixed in msg.c - Thanks again varmojfekoj - on file creation the file was always owned by root:root. This is fixed now - Thanks ypsa for solving this issue --------------------------------------------------------------------------- Version 1.19.1 (mmeckelein), 2007-08-22 - a bug that caused a high load when a TCP/UDP connection was closed is fixed now - Thanks mildew for solving this issue - fixed a bug which caused a segfault on reinit - Thx varmojfekoj for the patch - changed the hardcoded module path "/lib/rsyslog" to $(pkglibdir) in order to avoid trouble e.g. on 64 bit platforms (/lib64) - many thanks Peter Vrabec and darix, both provided a patch for solving this issue - enhanced the unloading of modules - thanks again varmojfekoj - applied a patch from varmojfekoj which fixes various little things in MySQL output module --------------------------------------------------------------------------- Version 1.19.0 (varmojfekoj/rgerhards), 2007-08-16 - integrated patch from varmojfekoj to make the mysql module a loadable one many thanks for the patch, MUCH appreciated --------------------------------------------------------------------------- Version 1.18.2 (rgerhards), 2007-08-13 - fixed a bug in outchannel code that caused templates to be incorrectly parsed - fixed a bug in ommysql that caused a wrong ";template" missing message - added some code for unloading modules; not yet fully complete (and we do not yet have loadable modules, so this is no problem) - removed debian subdirectory by request of a debian packager (this is a special subdir for debian and there is also no point in maintaining it when there is a debian package available - so I gladly did this) in some cases - improved overall doc quality (some pages were quite old) and linked to more of the online resources. - improved /contrib/delete_mysql script by adding a host option and some other minor modifications --------------------------------------------------------------------------- Version 1.18.1 (rgerhards), 2007-08-08 - applied a patch from varmojfekoj which solved a potential segfault of rsyslogd on HUP - applied patch from Michel Samia to fix compilation when the pthreads feature is disabled - some code cleanup (moved action object to its own file set) - add config directive $MainMsgQueueSize, which now allows to configure the queue size dynamically - all compile-time settings are now shown in rsyslogd -v, not just the active ones - enhanced performance a little bit more - added config file directive $ActionResumeInterval - fixed a bug that prevented compilation under debian sid - added a contrib directory for user-contributed useful things --------------------------------------------------------------------------- Version 1.18.0 (rgerhards), 2007-08-03 - rsyslog now supports fallback actions when an action did not work. This is a great feature e.g. for backup database servers or backup syslog servers - modified rklogd to only change the console log level if -c is specified - added feature to use multiple actions inside a single selector - implemented $ActionExecOnlyWhenPreviousIsSuspended config directive - error messages during startup are now spit out to the configured log destinations --------------------------------------------------------------------------- Version 1.17.6 (rgerhards), 2007-08-01 - continued to work on output module modularization - basic stage of this work is now FINISHED - fixed bug in OMSRcreate() - always returned SR_RET_OK - fixed a bug that caused ommysql to always complain about missing templates - fixed a mem leak in OMSRdestruct - freeing the object itself was forgotten - thanks to varmojfekoj for the patch - fixed a memory leak in syslogd/init() that happend when the config file could not be read - thanks to varmojfekoj for the patch - fixed insufficient memory allocation in addAction() and its helpers. The initial fix and idea was developed by mildew, I fine-tuned it a bit. Thanks a lot for the fix, I'd probably had pulled out my hair to find the bug... - added output of config file line number when a parsing error occured - fixed bug in objomsr.c that caused program to abort in debug mode with an invalid assertion (in some cases) - fixed a typo that caused the default template for MySQL to be wrong. thanks to mildew for catching this. - added configuration file command $DebugPrintModuleList and $DebugPrintCfSysLineHandlerList - fixed an invalid value for the MARK timer - unfortunately, there was a testing aid left in place. This resulted in quite frequent MARK messages - added $IncludeConfig config directive - applied a patch from mildew to prevent rsyslogd from freezing under heavy load. This could happen when the queue was full. Now, we drop messages but rsyslogd remains active. --------------------------------------------------------------------------- Version 1.17.5 (rgerhards), 2007-07-30 - continued to work on output module modularization - fixed a missing file bug - thanks to Andrea Montanari for reporting this problem - fixed a problem with shutting down the worker thread and freeing the selector_t list - this caused messages to be lost, because the message queue was not properly drained before the selectors got destroyed. --------------------------------------------------------------------------- Version 1.17.4 (rgerhards), 2007-07-27 - continued to work on output module modularization - fixed a situation where rsyslogd could create zombie processes thanks to mildew for the patch - applied patch from Michel Samia to fix compilation when NOT compiled for pthreads --------------------------------------------------------------------------- Version 1.17.3 (rgerhards), 2007-07-25 - continued working on output module modularization - fixed a bug that caused rsyslogd to segfault on exit (and probably also on HUP), when there was an unsent message in a selector that required forwarding and the dns lookup failed for that selector (yes, it was pretty unlikely to happen;)) thanks to varmojfekoj <varmojfekoj@gmail.com> for the patch - fixed a memory leak in config file parsing and die() thanks to varmojfekoj <varmojfekoj@gmail.com> for the patch - rsyslogd now checks on startup if it is capable to performa any work at all. If it cant, it complains and terminates thanks to Michel Samia for providing the patch! - fixed a small memory leak when HUPing syslogd. The allowed sender list now gets freed. thanks to mildew for the patch. - changed the way error messages in early startup are logged. They now do no longer use the syslogd code directly but are rather send to stderr. --------------------------------------------------------------------------- Version 1.17.2 (rgerhards), 2007-07-23 - made the port part of the -r option optional. Needed for backward compatibility with sysklogd - replaced system() calls with something more reasonable. Please note that this might break compatibility with some existing configuration files. We accept this in favour of the gained security. - removed a memory leak that could occur if timegenerated was used in RFC 3164 format in templates - did some preparation in msg.c for advanced multithreading - placed the hooks, but not yet any active code - worked further on modularization - added $ModLoad MySQL (dummy) config directive - added DropTrailingLFOnReception config directive --------------------------------------------------------------------------- Version 1.17.1 (rgerhards), 2007-07-20 - fixed a bug that caused make install to install rsyslogd and rklogd under the wrong names - fixed bug that caused $AllowedSenders to handle IPv6 scopes incorrectly; also fixed but that could grabble $AllowedSender wildcards. Thanks to mildew@gmail.com for the patch - minor code cleanup - thanks to Peter Vrabec for the patch - fixed minimal memory leak on HUP (caused by templates) thanks to varmojfekoj <varmojfekoj@gmail.com> for the patch - fixed another memory leak on HUPing and on exiting rsyslogd again thanks to varmojfekoj <varmojfekoj@gmail.com> for the patch - code cleanup (removed compiler warnings) - fixed portability bug in configure.ac - thanks to Bartosz Kuźma for patch - moved msg object into its own file set - added the capability to continue trying to write log files when the file system is full. Functionality based on patch by Martin Schulze to sysklogd package. --------------------------------------------------------------------------- Version 1.17.0 (RGer), 2007-07-17 - added $RepeatedLineReduction config parameter - added $EscapeControlCharactersOnReceive config parameter - added $ControlCharacterEscapePrefix config parameter - added $DirCreateMode config parameter - added $CreateDirs config parameter - added $DebugPrintTemplateList config parameter - added $ResetConfigVariables config parameter - added $FileOwner config parameter - added $FileGroup config parameter - added $DirOwner config parameter - added $DirGroup config parameter - added $FailOnChownFailure config parameter - added regular expression support to the filter engine thanks to Michel Samia for providing the patch! - enhanced $AllowedSender functionality. Credits to mildew@gmail.com for the patch doing that - added IPv6 support - allowed DNS hostnames - allowed DNS wildcard names - added new option $DropMsgsWithMaliciousDnsPTRRecords - added autoconf so that rfc3195d, rsyslogd and klogd are stored to /sbin - added capability to auto-create directories with dynaFiles --------------------------------------------------------------------------- Version 1.16.0 (RGer/Peter Vrabec), 2007-07-13 - The Friday, 13th Release ;) - build system switched to autotools - removed SYSV preprocessor macro use, replaced with autotools equivalents - fixed a bug that caused rsyslogd to segfault when TCP listening was disabled and it terminated - added new properties "syslogfacility-text" and "syslogseverity-text" thanks to varmojfekoj <varmojfekoj@gmail.com> for the patch - added the -x option to disable hostname dns reslution thanks to varmojfekoj <varmojfekoj@gmail.com> for the patch - begun to better modularize syslogd.c - this is an ongoing project; moved type definitions to a separate file - removed some now-unused fields from struct filed - move file size limit fields in struct field to the "right spot" (the file writing part of the union - f_un.f_file) - subdirectories linux and solaris are no longer part of the distribution package. This is not because we cease support for them, but there are no longer any files in them after the move to autotools --------------------------------------------------------------------------- Version 1.15.1 (RGer), 2007-07-10 - fixed a bug that caused a dynaFile selector to stall when there was an open error with one file - improved template processing for dynaFiles; templates are now only looked up during initialization - speeds up processing - optimized memory layout in struct filed when compiled with MySQL support - fixed a bug that caused compilation without SYSLOG_INET to fail - re-enabled the "last message repeated n times" feature. This feature was not taken care of while rsyslogd evolved from sysklogd and it was more or less defunct. Now it is fully functional again. - added system properties: $NOW, $YEAR, $MONTH, $DAY, $HOUR, $MINUTE - fixed a bug in iovAsString() that caused a memory leak under stress conditions (most probably memory shortage). This was unlikely to ever happen, but it doesn't hurt doing it right - cosmetic: defined type "uchar", change all unsigned chars to uchar --------------------------------------------------------------------------- Version 1.15.0 (RGer), 2007-07-05 - added ability to dynamically generate file names based on templates and thus properties. This was a much-requested feature. It makes life easy when it e.g. comes to splitting files based on the sender address. - added $umask and $FileCreateMode config file directives - applied a patch from Bartosz Kuzma to compile cleanly under NetBSD - checks for extra (unexpected) characters in system config file lines have been added - added IPv6 documentation - was accidently missing from CVS - begun to change char to unsigned char --------------------------------------------------------------------------- Version 1.14.2 (RGer), 2007-07-03 ** this release fixes all known nits with IPv6 ** - restored capability to do /etc/service lookup for "syslog" service when -r 0 was given - documented IPv6 handling of syslog messages - integrate patch from Bartosz Kuźma to make rsyslog compile under Solaris again (the patch replaced a strndup() call, which is not available under Solaris - improved debug logging when waiting on select - updated rsyslogd man page with new options (-46A) --------------------------------------------------------------------------- Version 1.14.1 (RGer/Peter Vrabec), 2007-06-29 - added Peter Vrabec's patch for IPv6 TCP - prefixed all messages send to stderr in rsyslogd with "rsyslogd: " --------------------------------------------------------------------------- Version 1.14.0 (RGer/Peter Vrabec), 2007-06-28 - Peter Vrabec provided IPv6 for rsyslog, so we are now IPv6 enabled IPv6 Support is currently for UDP only, TCP is to come soon. AllowedSender configuration does not yet work for IPv6. - fixed code in iovCreate() that broke C's strict aliasing rules - fixed some char/unsigned char differences that forced the compiler to spit out warning messages - updated the Red Hat init script to fix a known issue (thanks to Peter Vrabec) --------------------------------------------------------------------------- Version 1.13.5 (RGer), 2007-06-22 - made the TCP session limit configurable via command line switch now -t <port>,<max sessions> - added man page for rklogd(8) (basically a copy from klogd, but now there is one...) - fixed a bug that caused internal messages (e.g. rsyslogd startup) to appear without a tag. - removed a minor memory leak that occurred when TAG processing requalified a HOSTNAME to be a TAG (and a TAG already was set). - removed potential small memory leaks in MsgSet***() functions. There would be a leak if a property was re-set, something that happened extremely seldom. --------------------------------------------------------------------------- Version 1.13.4 (RGer), 2007-06-18 - added a new property "PRI-text", which holds the PRI field in textual form (e.g. "syslog.info") - added alias "syslogseverity" for "syslogpriority", which is a misleading property name that needs to stay for historical reasons (and backward-compatility) - added doc on how to record PRI value in log file - enhanced signal handling in klogd, including removal of an unsafe call to the logging system during signal handling --------------------------------------------------------------------------- Version 1.13.3 (RGer), 2007-06-15 - create a version of syslog.c from scratch. This is now - highly optimized for rsyslog - removes an incompatible license problem as the original version had a BSD license with advertising clause - fixed in the regard that rklogd will continue to work when rsysogd has been restarted (the original version, as well as sysklogd, will remain silent then) - solved an issue with an extra NUL char at message end that the original version had - applied some changes to klogd to care for the new interface - fixed a bug in syslogd.c which prevented compiling under debian --------------------------------------------------------------------------- Version 1.13.2 (RGer), 2007-06-13 - lib order in makefile patched to facilitate static linking - thanks to Bennett Todd for providing the patch - Integrated a patch from Peter Vrabec (pvrabec@redheat.com): - added klogd under the name of rklogd (remove dependency on original sysklogd package - createDB.sql now in UTF - added additional config files for use on Red Hat --------------------------------------------------------------------------- Version 1.13.1 (RGer), 2007-02-05 - changed the listen backlog limit to a more reasonable value based on the maximum number of TCP connections configurd (10% + 5) - thanks to Guy Standen for the hint (actually, the limit was 5 and that was a left-over from early testing). - fixed a bug in makefile which caused DB-support to be disabled when NETZIP support was enabled - added the -e option to allow transmission of every message to remote hosts (effectively turns off duplicate message suppression) - (somewhat) improved memory consumption when compiled with MySQL support - looks like we fixed an incompatibility with MySQL 5.x and above software At least in one case, the remote server name was destroyed, leading to a connection failure. The new, improved code does not have this issue and so we see this as solved (the new code is generally somewhat better, so there is a good chance we fixed this incompatibility). --------------------------------------------------------------------------- Version 1.13.0 (RGer), 2006-12-19 - added '$' as ToPos proptery replacer specifier - means "up to the end of the string" - property replacer option "escape-cc", "drop-cc" and "space-cc" added - changed the handling of \0 characters inside syslog messages. We now consistently escape them to "#000". This is somewhat recommended in the draft-ietf-syslog-protocol-19 draft. While the real recomendation is to not escape any characters at all, we can not do this without considerable modification of the code. So we escape it to "#000", which is consistent with a sample found in the Internet-draft. - removed message glue logic (see printchopped() comment for details) Also caused removal of parts table and thus some improvements in memory usage. - changed the default MAXLINE to 2048 to take care of recent syslog standardization efforts (can easily be changed in syslogd.c) - added support for byte-counted TCP syslog messages (much like syslog-transport-tls-05 Internet Draft). This was necessary to support compression over TCP. - added support for receiving compressed syslog messages - added support for sending compressed syslog messages - fixed a bug where the last message in a syslog/tcp stream was lost if it was not properly terminated by a LF character --------------------------------------------------------------------------- Version 1.12.3 (RGer), 2006-10-04 - implemented some changes to support Solaris (but support is not yet complete) - commented out (via #if 0) some methods that are currently not being use but should be kept for further us - added (interim) -u 1 option to turn off hostname and tag parsing - done some modifications to better support Fedora - made the field delimiter inside property replace configurable via template - fixed a bug in property replacer: if fields were used, the delimitor became part of the field. Up until now, this was barely noticable as the delimiter as TAB only and thus invisible to a human. With other delimiters available now, it quickly showed up. This bug fix might cause some grief to existing installations if they used the extra TAB for whatever reasons - sorry folks... Anyhow, a solution is easy: just add a TAB character contstant into your template. Thus, there has no attempt been made to do this in a backwards-compatible way. --------------------------------------------------------------------------- Version 1.12.2 (RGer), 2006-02-15 - fixed a bug in the RFC 3339 date formatter. An extra space was added after the actual timestamp - added support for providing high-precision RFC3339 timestamps for (rsyslogd-)internally-generated messages - very (!) experimental support for syslog-protocol internet draft added (the draft is experimental, the code is solid ;)) - added support for field-extracting in the property replacer - enhanced the legacy-syslog parser so that it can interpret messages that do not contain a TIMESTAMP - fixed a bug that caused the default socket (usually /dev/log) to be opened even when -o command line option was given - fixed a bug in the Debian sample startup script - it caused rsyslogd to listen to remote requests, which it shouldn't by default --------------------------------------------------------------------------- Version 1.12.1 (RGer), 2005-11-23 - made multithreading work with BSD. Some signal-handling needed to be restructured. Also, there might be a slight delay of up to 10 seconds when huping and terminating rsyslogd under BSD - fixed a bug where a NULL-pointer was passed to printf() in logmsg(). - fixed a bug during "make install" where rc3195d was not installed Thanks to Bennett Todd for spotting this. - fixed a bug where rsyslogd dumped core when no TAG was found in the received message - enhanced message parser so that it can deal with missing hostnames in many cases (may not be totally fail-safe) - fixed a bug where internally-generated messages did not have the correct TAG --------------------------------------------------------------------------- Version 1.12.0 (RGer), 2005-10-26 - moved to a multi-threaded design. single-threading is still optionally available. Multi-threading is experimental! - fixed a potential race condition. In the original code, marking was done by an alarm handler, which could lead to all sorts of bad things. This has been changed now. See comments in syslogd.c/domark() for details. - improved debug output for property-based filters - not a code change, but: I have checked all exit()s to make sure that none occurs once rsyslogd has started up. Even in unusual conditions (like low-memory conditions) rsyslogd somehow remains active. Of course, it might loose a message or two, but at least it does not abort and it can also recover when the condition no longer persists. - fixed a bug that could cause loss of the last message received immediately before rsyslogd was terminated. - added comments on thread-safety of global variables in syslogd.c - fixed a small bug: spurios printf() when TCP syslog was used - fixed a bug that causes rsyslogd to dump core on termination when one of the selector lines did not receive a message during the run (very unlikely) - fixed an one-too-low memory allocation in the TCP sender. Could result in rsyslogd dumping core. - fixed a bug with regular expression support (thanks to Andres Riancho) - a little bit of code restructuring (especially main(), which was horribly large) --------------------------------------------------------------------------- Version 1.11.1 (RGer), 2005-10-19 - support for BSD-style program name and host blocks - added a new property "programname" that can be used in templates - added ability to specify listen port for rfc3195d - fixed a bug that rendered the "startswith" comparison operation unusable. - changed more functions to "static" storage class to help compiler optimize (should have been static in the first place...) - fixed a potential memory leak in the string buffer class destructor. As the destructur was previously never called, the leak did not actually appear. - some internal restructuring in anticipation/preparation of minimal multi-threading support - rsyslogd still shares some code with the sysklogd project. Some patches for this shared code have been brought over from the sysklogd CVS. --------------------------------------------------------------------------- Version 1.11.0 (RGer), 2005-10-12 - support for receiving messages via RFC 3195; added rfc3195d for that purpose - added an additional guard to prevent rsyslogd from aborting when the 2gb file size limit is hit. While a user can configure rsyslogd to handle such situations, it would abort if that was not done AND large file support was not enabled (ok, this is hopefully an unlikely scenario) - fixed a bug that caused additional Unix domain sockets to be incorrectly processed - could lead to message loss in extreme cases --------------------------------------------------------------------------- Version 1.10.2 (RGer), 2005-09-27 - added comparison operations in property-based filters: * isequal * startswith - added ability to negate all property-based filter comparison operations by adding a !-sign right in front of the operation name - added the ability to specify remote senders for UDP and TCP received messages. Allows to block all but well-known hosts - changed the $-config line directives to be case-INsensitive - new command line option -w added: "do not display warnings if messages from disallowed senders are received" - fixed a bug that caused rsyslogd to dump core when the compare value was not quoted in property-based filters - fixed a bug in the new CStr compare function which lead to invalid results (fortunately, this function was not yet used widely) - added better support for "debugging" rsyslog.conf property filters (only if -d switch is given) - changed some function definitions to static, which eventually enables some compiler optimizations - fixed a bug in MySQL code; when a SQL error occured, rsyslogd could run in a tight loop. This was due to invalid sequence of error reporting and is now fixed. --------------------------------------------------------------------------- Version 1.10.1 (RGer), 2005-09-23 - added the ability to execute a shell script as an action. Thanks to Bjoern Kalkbrenner for providing the code! - fixed a bug in the MySQL code; due to the bug the automatic one-time retry after an error did not happen - this lead to error message in cases where none should be seen (e.g. after a MySQL restart) - fixed a security issue with SQL-escaping in conjunction with non-(SQL-)standard MySQL features. --------------------------------------------------------------------------- Version 1.10.0 (RGer), 2005-09-20 REMINDER: 1.10 is the first unstable version if the 1.x series! - added the capability to filter on any property in selector lines (not just facility and priority) - changed stringbuf into a new counted string class - added support for a "discard" action. If a selector line with discard (~ character) is found, no selector lines *after* that line will be processed. - thanks to Andres Riancho, regular expression support has been added to the template engine - added the FROMHOST property in the template processor, which could previously not be obtained. Thanks to Cristian Testa for pointing this out and even providing a fix. - added display of compile-time options to -v output - performance improvement for production build - made some checks to happen only during debug mode - fixed a problem with compiling on SUSE and - while doing so - removed the socket call to set SO_BSDCOMPAT in cases where it is obsolete. --------------------------------------------------------------------------- Version 1.0.4 (RGer), 2006-02-01 - a small but important fix: the tcp receiver had two forgotten printf's in it that caused a lot of unnecessary output to stdout. This was important enough to justify a new release --------------------------------------------------------------------------- Version 1.0.3 (RGer), 2005-11-14 - added an additional guard to prevent rsyslogd from aborting when the 2gb file size limit is hit. While a user can configure rsyslogd to handle such situations, it would abort if that was not done AND large file support was not enabled (ok, this is hopefully an unlikely scenario) - fixed a bug that caused additional Unix domain sockets to be incorrectly processed - could lead to message loss in extreme cases - applied some patches available from the sysklogd project to code shared from there - fixed a bug that causes rsyslogd to dump core on termination when one of the selector lines did not receive a message during the run (very unlikely) - fixed an one-too-low memory allocation in the TCP sender. Could result in rsyslogd dumping core. - fixed a bug in the TCP sender that caused the retry logic to fail after an error or receiver overrun - fixed a bug in init() that could lead to dumping core - fixed a bug that could lead to dumping core when no HOSTNAME or no TAG was present in the syslog message --------------------------------------------------------------------------- Version 1.0.2 (RGer), 2005-10-05 - fixed an issue with MySQL error reporting. When an error occured, the MySQL driver went into an endless loop (at least in most cases). --------------------------------------------------------------------------- Version 1.0.1 (RGer), 2005-09-23 - fixed a security issue with SQL-escaping in conjunction with non-(SQL-)standard MySQL features. --------------------------------------------------------------------------- Version 1.0.0 (RGer), 2005-09-12 - changed install doc to cover daily cron scripts - a trouble source - added rc script for slackware (provided by Chris Elvidge - thanks!) - fixed a really minor bug in usage() - the -r option was still reported as without the port parameter --------------------------------------------------------------------------- Version 0.9.8 (RGer), 2005-09-05 - made startup and shutdown message more consistent and included the pid, so that they can be easier correlated. Used syslog-protocol structured data format for this purpose. - improved config info in startup message, now tells not only if it is listening remote on udp, but also for tcp. Also includes the port numbers. The previous startup message was misleading, because it did not say "remote reception" if rsyslogd was only listening via tcp (but not via udp). - added a "how can you help" document to the doc set --------------------------------------------------------------------------- Version 0.9.7 (RGer), 2005-08-15 - some of the previous doc files (like INSTALL) did not properly reflect the changes to the build process and the new doc. Fixed that. - changed syslogd.c so that when compiled without database support, an error message is displayed when a database action is detected in the config file (previously this was used as an user rule ;)) - fixed a bug in the os-specific Makefiles which caused MySQL support to not be compiled, even if selected --------------------------------------------------------------------------- Version 0.9.6 (RGer), 2005-08-09 - greatly enhanced documentation. Now available in html format in the "doc" folder and FreeBSD. Finally includes an install howto. - improved MySQL error messages a little - they now show up as log messages, too (formerly only in debug mode) - added the ability to specify the listen port for udp syslog. WARNING: This introduces an incompatibility. Formerly, udp syslog was enabled by the -r command line option. Now, it is "-r [port]", which is consistent with the tcp listener. However, just -r will now return an error message. - added sample startup scripts for Debian and FreeBSD - added support for easy feature selection in the makefile. Un- fortunately, this also means I needed to spilt the make file for different OS and distros. There are some really bad syntax differences between FreeBSD and Linux make. --------------------------------------------------------------------------- Version 0.9.5 (RGer), 2005-08-01 - the "semicolon bug" was actually not (fully) solved in 0.9.4. One part of the bug was solved, but another still existed. This one is fixed now, too. - the "semicolon bug" actually turned out to be a more generic bug. It appeared whenever an invalid template name was given. With some selector actions, rsyslogd dumped core, with other it "just" had a small ressource leak with others all worked well. These anomalies are now fixed. Note that they only appeared during system initaliziation once the system was running, nothing bad happened. - improved error reporting for template errors on startup. They are now shown on the console and the start-up tty. Formerly, they were only visible in debug mode. - support for multiple instances of rsyslogd on a single machine added - added new option "-o" --> omit local unix domain socket. This option enables rsyslogd NOT to listen to the local socket. This is most helpful when multiple instances of rsyslogd (or rsyslogd and another syslogd) shall run on a single system. - added new option "-i <pidfile>" which allows to specify the pidfile. This is needed when multiple instances of rsyslogd are to be run. - the new project home page is now online at www.rsyslog.com --------------------------------------------------------------------------- Version 0.9.4 (RGer), 2005-07-25 - finally added the TCP sender. It now supports non-blocking mode, no longer disabling message reception during connect. As it is now, it is usable in production. The code could be more sophisticated, but I've kept it short in anticipation of the move to liblogging, which will lead to the removal of the code just written ;) - the "exiting on signal..." message still had the "syslogd" name in it. Changed this to "rsyslogd", as we do not have a large user base yet, this should pose no problem. - fixed "the semiconlon" bug. rsyslogd dumped core if a write-db action was specified but no semicolon was given after the password (an empty template was ok, but the semicolon needed to be present). - changed a default for traditional output format. During testing, it was seen that the timestamp written to file in default format was the time of message reception, not the time specified in the TIMESTAMP field of the message itself. Traditionally, the message TIMESTAMP is used and this has been changed now. --------------------------------------------------------------------------- Version 0.9.3 (RGer), 2005-07-19 - fixed a bug in the message parser. In June, the RFC 3164 timestamp was not correctly parsed (yes, only in June and some other months, see the code comment to learn why...) - added the ability to specify the destination port when forwarding syslog messages (both for TCP and UDP) - added an very experimental TCP sender (activated by @@machine:port in config). This is not yet for production use. If the receiver is not alive, rsyslogd will wait quite some time until the connection request times out, which most probably leads to loss of incoming messages. --------------------------------------------------------------------------- Version 0.9.2 (RGer), around 2005-07-06 - I intended to change the maxsupported message size to 32k to support IHE - but given the memory inefficiency in the usual use cases, I have not done this. I have, however, included very specific instructions on how to do this in the source code. I have also done some testing with 32k messages, so you can change the max size without taking too much risk. - added a syslog/tcp receiver; we now can receive messages via plain tcp, but we can still send only via UDP. The syslog/tcp receiver is the primary enhancement of this release. - slightly changed some error messages that contained a spurios \n at the end of the line (which gives empty lines in your log...) --------------------------------------------------------------------------- Version 0.9.1 (RGer) - fixed code so that it compiles without errors under FreeBSD - removed now unused function "allocate_log()" from syslogd.c - changed the make file so that it contains more defines for different environments (in the long term, we need a better system for disabling/enabling features...) - changed some printf's printing off_t types to %lld and explicit (long long) casts. I tried to figure out the exact type, but did not succeed in this. In the worst case, ultra-large peta- byte files will now display funny informational messages on rollover, something I think we can live with for the next 10 years or so... --------------------------------------------------------------------------- Version 0.9.0 (RGer) - changed the filed structure to be a linked list. Previously, it was a table - well, for non-SYSV it was defined as linked list, but from what I see that code did no longer work after my modifications. I am now using a linked list in general because that is needed for other upcoming modifications. - fixed a bug that caused rsyslogd not to listen to anything if the configuration file could not be read - pervious versions disabled network logging (send/receive) if syslog/udp port was not in /etc/services. Now defaulting to port 514 in this case. - internal error messages are now supported up to 256 bytes - error message seen during config file read are now also displayed to the attached tty and not only the console - changed some error messages during init to be sent to the console and/or emergency log. Previously, they were only seen if the -d (debug) option was present on the command line. - fixed the "2gb file issue on 32bit systems". If a file grew to more than 2gb, the syslogd was aborted with "file size exceeded". Now, defines have been added according to http://www.daimi.au.dk/~kasperd/comp.os.linux.development.faq.html#LARGEFILE Testing revealed that they work ;) HOWEVER, if your file system, glibc, kernel, whatever does not support files larger 2gb, you need to set a file size limit with the new output channel mechanism. - updated man pages to reflect the changes --------------------------------------------------------------------------- Version 0.8.4 - improved -d debug output (removed developer-only content) - now compiles under FreeBSD and NetBSD (only quick testing done on NetBSD) --------------------------------------------------------------------------- Version 0.8.3 - security model in "make install" changed - minor doc updates --------------------------------------------------------------------------- Version 0.8.2 - added man page for rsyslog.conf and rsyslogd - gave up on the concept of rsyslog being a "drop in" replacement for syslogd. Now, the user installs rsyslogd and also needs to adjust his system settings to this specifically. This also lead to these changes: * changed Makefile so that install now installs rsyslogd instead of dealing with syslogd * changed the default config file name to rsyslog.conf --------------------------------------------------------------------------- Version 0.8.1 - fixed a nasty memory leak (probably not the last one with this release) - some enhancements to Makefile as suggested by Bennett Todd - syslogd-internal messages (like restart) were missing the hostname this has been corrected --------------------------------------------------------------------------- Version 0.8.0 Initial testing release. Based on the sysklogd package. Thanks to the sysklogd maintainers for all their good work! --------------------------------------------------------------------------- ---------------------------------------------------------------------- The following comments were left in the syslogd source. While they provide not too much detail, the help to date when Rainer started work on the project (which was 2003, now even surprising for Rainer himself ;)). * \author Rainer Gerhards <rgerhards@adiscon.com> * \date 2003-10-17 * Some initial modifications on the sysklogd package to support * liblogging. These have actually not yet been merged to the * source you see currently (but they hopefully will) * * \date 2004-10-28 * Restarted the modifications of sysklogd. This time, we * focus on a simpler approach first. The initial goal is to * provide MySQL database support (so that syslogd can log * to the database). ---------------------------------------------------------------------- The following comments are from the stock syslogd.c source. They provide some insight into what happened to the source before we forked rsyslogd. However, much of the code already has been replaced and more is to be replaced. So over time, these comments become less valuable. I have moved them out of the syslogd.c file to shrink it, especially as a lot of them do no longer apply. For historical reasons and understanding of how the daemon evolved, they are probably still helpful. * Author: Eric Allman * extensive changes by Ralph Campbell * more extensive changes by Eric Allman (again) * * Steve Lord: Fix UNIX domain socket code, added linux kernel logging * change defines to * SYSLOG_INET - listen on a UDP socket * SYSLOG_UNIXAF - listen on unix domain socket * SYSLOG_KERNEL - listen to linux kernel * * Mon Feb 22 09:55:42 CST 1993: Dr. Wettstein * Additional modifications to the source. Changed priority scheme * to increase the level of configurability. In its stock configuration * syslogd no longer logs all messages of a certain priority and above * to a log file. The * wildcard is supported to specify all priorities. * Note that this is a departure from the BSD standard. * * Syslogd will now listen to both the inetd and the unixd socket. The * strategy is to allow all local programs to direct their output to * syslogd through the unixd socket while the program listens to the * inetd socket to get messages forwarded from other hosts. * * Fri Mar 12 16:55:33 CST 1993: Dr. Wettstein * Thanks to Stephen Tweedie (dcs.ed.ac.uk!sct) for helpful bug-fixes * and an enlightened commentary on the prioritization problem. * * Changed the priority scheme so that the default behavior mimics the * standard BSD. In this scenario all messages of a specified priority * and above are logged. * * Add the ability to specify a wildcard (=) as the first character * of the priority name. Doing this specifies that ONLY messages with * this level of priority are to be logged. For example: * * *.=debug /usr/adm/debug * * Would log only messages with a priority of debug to the /usr/adm/debug * file. * * Providing an * as the priority specifies that all messages are to be * logged. Note that this case is degenerate with specifying a priority * level of debug. The wildcard * was retained because I believe that * this is more intuitive. * * Thu Jun 24 11:34:13 CDT 1993: Dr. Wettstein * Modified sources to incorporate changes in libc4.4. Messages from * syslog are now null-terminated, syslogd code now parses messages * based on this termination scheme. Linux as of libc4.4 supports the * fsync system call. Modified code to fsync after all writes to * log files. * * Sat Dec 11 11:59:43 CST 1993: Dr. Wettstein * Extensive changes to the source code to allow compilation with no * complaints with -Wall. * * Reorganized the facility and priority name arrays so that they * compatible with the syslog.h source found in /usr/include/syslog.h. * NOTE that this should really be changed. The reason I do not * allow the use of the values defined in syslog.h is on account of * the extensions made to allow the wildcard character in the * priority field. To fix this properly one should malloc an array, * copy the contents of the array defined by syslog.h and then * make whatever modifications that are desired. Next round. * * Thu Jan 6 12:07:36 CST 1994: Dr. Wettstein * Added support for proper decomposition and re-assembly of * fragment messages on UNIX domain sockets. Lack of this capability * was causing 'partial' messages to be output. Since facility and * priority information is encoded as a leader on the messages this * was causing lines to be placed in erroneous files. * * Also added a patch from Shane Alderton (shane@ion.apana.org.au) to * correct a problem with syslogd dumping core when an attempt was made * to write log messages to a logged-on user. Thank you. * * Many thanks to Juha Virtanen (jiivee@hut.fi) for a series of * interchanges which lead to the fixing of problems with messages set * to priorities of none and emerg. Also thanks to Juha for a patch * to exclude users with a class of LOGIN from receiving messages. * * Shane Alderton provided an additional patch to fix zombies which * were conceived when messages were written to multiple users. * * Mon Feb 6 09:57:10 CST 1995: Dr. Wettstein * Patch to properly reset the single priority message flag. Thanks * to Christopher Gori for spotting this bug and forwarding a patch. * * Wed Feb 22 15:38:31 CST 1995: Dr. Wettstein * Added version information to startup messages. * * Added defines so that paths to important files are taken from * the definitions in paths.h. Hopefully this will insure that * everything follows the FSSTND standards. Thanks to Chris Metcalf * for a set of patches to provide this functionality. Also thanks * Elias Levy for prompting me to get these into the sources. * * Wed Jul 26 18:57:23 MET DST 1995: Martin Schulze * Linux' gethostname only returns the hostname and not the fqdn as * expected in the code. But if you call hostname with an fqdn then * gethostname will return an fqdn, so we have to mention that. This * has been changed. * * The 'LocalDomain' and the hostname of a remote machine is * converted to lower case, because the original caused some * inconsistency, because the (at least my) nameserver did respond an * fqdn containing of upper- _and_ lowercase letters while * 'LocalDomain' consisted only of lowercase letters and that didn't * match. * * Sat Aug 5 18:59:15 MET DST 1995: Martin Schulze * Now no messages that were received from any remote host are sent * out to another. At my domain this missing feature caused ugly * syslog-loops, sometimes. * * Remember that no message is sent out. I can't figure out any * scenario where it might be useful to change this behavior and to * send out messages to other hosts than the one from which we * received the message, but I might be shortsighted. :-/ * * Thu Aug 10 19:01:08 MET DST 1995: Martin Schulze * Added my pidfile.[ch] to it to perform a better handling with * pidfiles. Now both, syslogd and klogd, can only be started * once. They check the pidfile. * * Sun Aug 13 19:01:41 MET DST 1995: Martin Schulze * Add an addition to syslog.conf's interpretation. If a priority * begins with an exclamation mark ('!') the normal interpretation * of the priority is inverted: ".!*" is the same as ".none", ".!=info" * don't logs the info priority, ".!crit" won't log any message with * the priority crit or higher. For example: * * mail.*;mail.!=info /usr/adm/mail * * Would log all messages of the facility mail except those with * the priority info to /usr/adm/mail. This makes the syslogd * much more flexible. * * Defined TABLE_ALLPRI=255 and changed some occurrences. * * Sat Aug 19 21:40:13 MET DST 1995: Martin Schulze * Making the table of facilities and priorities while in debug * mode more readable. * * If debugging is turned on, printing the whole table of * facilities and priorities every hexadecimal or 'X' entry is * now 2 characters wide. * * The number of the entry is prepended to each line of * facilities and priorities, and F_UNUSED lines are not shown * anymore. * * Corrected some #ifdef SYSV's. * * Mon Aug 21 22:10:35 MET DST 1995: Martin Schulze * Corrected a strange behavior during parsing of configuration * file. The original BSD syslogd doesn't understand spaces as * separators between specifier and action. This syslogd now * understands them. The old behavior caused some confusion over * the Linux community. * * Thu Oct 19 00:02:07 MET 1995: Martin Schulze * The default behavior has changed for security reasons. The * syslogd will not receive any remote message unless you turn * reception on with the "-r" option. * * Not defining SYSLOG_INET will result in not doing any network * activity, i.e. not sending or receiving messages. I changed * this because the old idea is implemented with the "-r" option * and the old thing didn't work anyway. * * Thu Oct 26 13:14:06 MET 1995: Martin Schulze * Added another logfile type F_FORW_UNKN. The problem I ran into * was a name server that runs on my machine and a forwarder of * kern.crit to another host. The hosts address can only be * fetched using the nameserver. But named is started after * syslogd, so syslogd complained. * * This logfile type will retry to get the address of the * hostname ten times and then complain. This should be enough to * get the named up and running during boot sequence. * * Fri Oct 27 14:08:15 1995: Dr. Wettstein * Changed static array of logfiles to a dynamic array. This * can grow during process. * * Fri Nov 10 23:08:18 1995: Martin Schulze * Inserted a new tabular sys_h_errlist that contains plain text * for error codes that are returned from the net subsystem and * stored in h_errno. I have also changed some wrong lookups to * sys_errlist. * * Wed Nov 22 22:32:55 1995: Martin Schulze * Added the fabulous strip-domain feature that allows us to * strip off (several) domain names from the fqdn and only log * the simple hostname. This is useful if you're in a LAN that * has a central log server and also different domains. * * I have also also added the -l switch do define hosts as * local. These will get logged with their simple hostname, too. * * Thu Nov 23 19:02:56 MET DST 1995: Martin Schulze * Added the possibility to omit fsyncing of logfiles after every * write. This will give some performance back if you have * programs that log in a very verbose manner (like innd or * smartlist). Thanks to Stephen R. van den Berg <srb@cuci.nl> * for the idea. * * Thu Jan 18 11:14:36 CST 1996: Dr. Wettstein * Added patche from beta-testers to stop compile error. Also * added removal of pid file as part of termination cleanup. * * Wed Feb 14 12:42:09 CST 1996: Dr. Wettstein * Allowed forwarding of messages received from remote hosts to * be controlled by a command-line switch. Specifying -h allows * forwarding. The default behavior is to disable forwarding of * messages which were received from a remote host. * * Parent process of syslogd does not exit until child process has * finished initialization process. This allows rc.* startup to * pause until syslogd facility is up and operating. * * Re-arranged the select code to move UNIX domain socket accepts * to be processed later. This was a contributed change which * has been proposed to correct the delays sometimes encountered * when syslogd starts up. * * Minor code cleanups. * * Thu May 2 15:15:33 CDT 1996: Dr. Wettstein * Fixed bug in init function which resulted in file descripters * being orphaned when syslogd process was re-initialized with SIGHUP * signal. Thanks to Edvard Tuinder * (Edvard.Tuinder@praseodymium.cistron.nl) for putting me on the * trail of this bug. I am amazed that we didn't catch this one * before now. * * Tue May 14 00:03:35 MET DST 1996: Martin Schulze * Corrected a mistake that causes the syslogd to stop logging at * some virtual consoles under Linux. This was caused by checking * the wrong error code. Thanks to Michael Nonweiler * <mrn20@hermes.cam.ac.uk> for sending me a patch. * * Mon May 20 13:29:32 MET DST 1996: Miquel van Smoorenburg <miquels@cistron.nl> * Added continuation line supported and fixed a bug in * the init() code. * * Tue May 28 00:58:45 MET DST 1996: Martin Schulze * Corrected behaviour of blocking pipes - i.e. the whole system * hung. Michael Nonweiler <mrn20@hermes.cam.ac.uk> has sent us * a patch to correct this. A new logfile type F_PIPE has been * introduced. * * Mon Feb 3 10:12:15 MET DST 1997: Martin Schulze * Corrected behaviour of logfiles if the file can't be opened. * There was a bug that causes syslogd to try to log into non * existing files which ate cpu power. * * Sun Feb 9 03:22:12 MET DST 1997: Martin Schulze * Modified syslogd.c to not kill itself which confuses bash 2.0. * * Mon Feb 10 00:09:11 MET DST 1997: Martin Schulze * Improved debug code to decode the numeric facility/priority * pair into textual information. * * Tue Jun 10 12:35:10 MET DST 1997: Martin Schulze * Corrected freeing of logfiles. Thanks to Jos Vos <jos@xos.nl> * for reporting the bug and sending an idea to fix the problem. * * Tue Jun 10 12:51:41 MET DST 1997: Martin Schulze * Removed sleep(10) from parent process. This has caused a slow * startup in former times - and I don't see any reason for this. * * Sun Jun 15 16:23:29 MET DST 1997: Michael Alan Dorman * Some more glibc patches made by <mdorman@debian.org>. * * Thu Jan 1 16:04:52 CET 1998: Martin Schulze <joey@infodrom.north.de * Applied patch from Herbert Thielen <Herbert.Thielen@lpr.e-technik.tu-muenchen.de>. * This included some balance parentheses for emacs and a bug in * the exclamation mark handling. * * Fixed small bug which caused syslogd to write messages to the * wrong logfile under some very rare conditions. Thanks to * Herbert Xu <herbert@gondor.apana.org.au> for fiddling this out. * * Thu Jan 8 22:46:35 CET 1998: Martin Schulze <joey@infodrom.north.de> * Reworked one line of the above patch as it prevented syslogd * from binding the socket with the result that no messages were * forwarded to other hosts. * * Sat Jan 10 01:33:06 CET 1998: Martin Schulze <joey@infodrom.north.de> * Fixed small bugs in F_FORW_UNKN meachanism. Thanks to Torsten * Neumann <torsten@londo.rhein-main.de> for pointing me to it. * * Mon Jan 12 19:50:58 CET 1998: Martin Schulze <joey@infodrom.north.de> * Modified debug output concerning remote receiption. * * Mon Feb 23 23:32:35 CET 1998: Topi Miettinen <Topi.Miettinen@ml.tele.fi> * Re-worked handling of Unix and UDP sockets to support closing / * opening of them in order to have it open only if it is needed * either for forwarding to a remote host or by receiption from * the network. * * Wed Feb 25 10:54:09 CET 1998: Martin Schulze <joey@infodrom.north.de> * Fixed little comparison mistake that prevented the MARK * feature to work properly. * * Wed Feb 25 13:21:44 CET 1998: Martin Schulze <joey@infodrom.north.de> * Corrected Topi's patch as it prevented forwarding during * startup due to an unknown LogPort. * * Sat Oct 10 20:01:48 CEST 1998: Martin Schulze <joey@infodrom.north.de> * Added support for TESTING define which will turn syslogd into * stdio-mode used for debugging. * * Sun Oct 11 20:16:59 CEST 1998: Martin Schulze <joey@infodrom.north.de> * Reworked the initialization/fork code. Now the parent * process activates a signal handler which the daughter process * will raise if it is initialized. Only after that one the * parent process may exit. Otherwise klogd might try to flush * its log cache while syslogd can't receive the messages yet. * * Mon Oct 12 13:30:35 CEST 1998: Martin Schulze <joey@infodrom.north.de> * Redirected some error output with regard to argument parsing to * stderr. * * Mon Oct 12 14:02:51 CEST 1998: Martin Schulze <joey@infodrom.north.de> * Applied patch provided vom Topi Miettinen with regard to the * people from OpenBSD. This provides the additional '-a' * argument used for specifying additional UNIX domain sockets to * listen to. This is been used with chroot()'ed named's for * example. See for http://www.psionic.com/papers/dns.html * * Mon Oct 12 18:29:44 CEST 1998: Martin Schulze <joey@infodrom.north.de> * Added `ftp' facility which was introduced in glibc version 2. * It's #ifdef'ed so won't harm with older libraries. * * Mon Oct 12 19:59:21 MET DST 1998: Martin Schulze <joey@infodrom.north.de> * Code cleanups with regard to bsd -> posix transition and * stronger security (buffer length checking). Thanks to Topi * Miettinen <tom@medialab.sonera.net> * . index() --> strchr() * . sprintf() --> snprintf() * . bcopy() --> memcpy() * . bzero() --> memset() * . UNAMESZ --> UT_NAMESIZE * . sys_errlist --> strerror() * * Mon Oct 12 20:22:59 CEST 1998: Martin Schulze <joey@infodrom.north.de> * Added support for setutent()/getutent()/endutend() instead of * binary reading the UTMP file. This is the the most portable * way. This allows /var/run/utmp format to change, even to a * real database or utmp daemon. Also if utmp file locking is * implemented in libc, syslog will use it immediately. Thanks * to Topi Miettinen <tom@medialab.sonera.net>. * * Mon Oct 12 20:49:18 MET DST 1998: Martin Schulze <joey@infodrom.north.de> * Avoid logging of SIGCHLD when syslogd is in the process of * exiting and closing its files. Again thanks to Topi. * * Mon Oct 12 22:18:34 CEST 1998: Martin Schulze <joey@infodrom.north.de> * Modified printline() to support 8bit characters - such as * russion letters. Thanks to Vladas Lapinskas <lapinskas@mail.iae.lt>. * * Sat Nov 14 02:29:37 CET 1998: Martin Schulze <joey@infodrom.north.de> * ``-m 0'' now turns of MARK logging entirely. * * Tue Jan 19 01:04:18 MET 1999: Martin Schulze <joey@infodrom.north.de> * Finally fixed an error with `-a' processing, thanks to Topi * Miettinen <tom@medialab.sonera.net>. * * Sun May 23 10:08:53 CEST 1999: Martin Schulze <joey@infodrom.north.de> * Removed superflous call to utmpname(). The path to the utmp * file is defined in the used libc and should not be hardcoded * into the syslogd binary referring the system it was compiled on. * * Sun Sep 17 20:45:33 CEST 2000: Martin Schulze <joey@infodrom.ffis.de> * Fixed some bugs in printline() code that did not escape * control characters '\177' through '\237' and contained a * single-byte buffer overflow. Thanks to Solar Designer * <solar@false.com>. * * Sun Sep 17 21:26:16 CEST 2000: Martin Schulze <joey@infodrom.ffis.de> * Don't close open sockets upon reload. Thanks to Bill * Nottingham. * * Mon Sep 18 09:10:47 CEST 2000: Martin Schulze <joey@infodrom.ffis.de> * Fixed bug in printchopped() that caused syslogd to emit * kern.emerg messages when splitting long lines. Thanks to * Daniel Jacobowitz <dan@debian.org> for the fix. * * Mon Sep 18 15:33:26 CEST 2000: Martin Schulze <joey@infodrom.ffis.de> * Removed unixm/unix domain sockets and switch to Datagram Unix * Sockets. This should remove one possibility to play DoS with * syslogd. Thanks to Olaf Kirch <okir@caldera.de> for the patch. * * Sun Mar 11 20:23:44 CET 2001: Martin Schulze <joey@infodrom.ffis.de> * Don't return a closed fd if `-a' is called with a wrong path. * Thanks to Bill Nottingham <notting@redhat.com> for providing * a patch.