korsygfhrtzangaiide

## Path: Hardware/IPMI ## Description: Enable standard hardware interfaces (KCS, BT, SMIC) ## Type: yesno ## Default: "yes" ## Config: ipmi # Enable standard hardware interfaces (KCS, BT, SMIC) # You probably want this enabled. # IPMI_SI disabled by OpenIPMI-modalias rpm scriplet IPMI_SI=no ## Path: Hardware/IPMI ## Description: Enable /dev/ipmi0 interface, used by ipmitool, ipmicmd, ## Type: yesno ## Default: "yes" ## Config: ipmi # Enable /dev/ipmi0 interface, used by ipmitool, ipmicmd, # and other userspace IPMI-using applications. # You probably want this enabled. DEV_IPMI=yes ## Path: Hardware/IPMI ## Description: Enable IPMI_WATCHDOG if you want the IPMI watchdog ## Type: yesno ## Default: "no" ## Config: ipmi # Enable IPMI_WATCHDOG if you want the IPMI watchdog # to reboot the system if it hangs IPMI_WATCHDOG=no ## Path: Hardware/IPMI ## Description: Watchdog options - modinfo ipmi_watchdog for details ## Type: string ## Default: "timeout=60" ## Config: ipmi # Watchdog options - modinfo ipmi_watchdog for details # watchdog timeout value in seconds # as there is no userspace ping application that runs during shutdown, # be sure to give it enough time for any device drivers to # do their cleanup (e.g. megaraid cache flushes) # without the watchdog triggering prematurely IPMI_WATCHDOG_OPTIONS="timeout=60" ## Path: Hardware/IPMI ## Description: Enable IPMI_POWEROFF if you want the IPMI poweroff module to be loaded. ## Type: yesno ## Default: "no" ## Config: ipmi # Enable IPMI_POWEROFF if you want the IPMI # poweroff module to be loaded. IPMI_POWEROFF=no ## Path: Hardware/IPMI ## Description: Enable IPMI_POWERCYCLE if you want the system to be power-cycled on reboot ## Type: yesno ## Default: "no" ## Config: ipmi # Enable IPMI_POWERCYCLE if you want the system to be power-cycled (power # down, delay briefly, power on) rather than power off, on systems # that support such. IPMI_POWEROFF=yes is also required. IPMI_POWERCYCLE=no ## Path: Hardware/IPMI ## Description: Enable "legacy" interfaces for applications ## Type: yesno ## Default: "no" ## Config: ipmi # Enable "legacy" interfaces for applications # Intel IMB driver interface IPMI_IMB=no