korsygfhrtzangaiide

:mod:`re` --- Regular expression operations =========================================== .. module:: re :synopsis: Regular expression operations. .. moduleauthor:: Fredrik Lundh <fredrik@pythonware.com> .. sectionauthor:: Andrew M. Kuchling <amk@amk.ca> This module provides regular expression matching operations similar to those found in Perl. Both patterns and strings to be searched can be Unicode strings as well as 8-bit strings. Regular expressions use the backslash character (``'\'``) to indicate special forms or to allow special characters to be used without invoking their special meaning. This collides with Python's usage of the same character for the same purpose in string literals; for example, to match a literal backslash, one might have to write ``'\\\\'`` as the pattern string, because the regular expression must be ``\\``, and each backslash must be expressed as ``\\`` inside a regular Python string literal. The solution is to use Python's raw string notation for regular expression patterns; backslashes are not handled in any special way in a string literal prefixed with ``'r'``. So ``r"\n"`` is a two-character string containing ``'\'`` and ``'n'``, while ``"\n"`` is a one-character string containing a newline. Usually patterns will be expressed in Python code using this raw string notation. It is important to note that most regular expression operations are available as module-level functions and :class:`RegexObject` methods. The functions are shortcuts that don't require you to compile a regex object first, but miss some fine-tuning parameters. .. seealso:: Mastering Regular Expressions Book on regular expressions by Jeffrey Friedl, published by O'Reilly. The second edition of the book no longer covers Python at all, but the first edition covered writing good regular expression patterns in great detail. .. _re-syntax: Regular Expression Syntax ------------------------- A regular expression (or RE) specifies a set of strings that matches it; the functions in this module let you check if a particular string matches a given regular expression (or if a given regular expression matches a particular string, which comes down to the same thing). Regular expressions can be concatenated to form new regular expressions; if *A* and *B* are both regular expressions, then *AB* is also a regular expression. In general, if a string *p* matches *A* and another string *q* matches *B*, the string *pq* will match AB. This holds unless *A* or *B* contain low precedence operations; boundary conditions between *A* and *B*; or have numbered group references. Thus, complex expressions can easily be constructed from simpler primitive expressions like the ones described here. For details of the theory and implementation of regular expressions, consult the Friedl book referenced above, or almost any textbook about compiler construction. A brief explanation of the format of regular expressions follows. For further information and a gentler presentation, consult the :ref:`regex-howto`. Regular expressions can contain both special and ordinary characters. Most ordinary characters, like ``'A'``, ``'a'``, or ``'0'``, are the simplest regular expressions; they simply match themselves. You can concatenate ordinary characters, so ``last`` matches the string ``'last'``. (In the rest of this section, we'll write RE's in ``this special style``, usually without quotes, and strings to be matched ``'in single quotes'``.) Some characters, like ``'|'`` or ``'('``, are special. Special characters either stand for classes of ordinary characters, or affect how the regular expressions around them are interpreted. Regular expression pattern strings may not contain null bytes, but can specify the null byte using the ``\number`` notation, e.g., ``'\x00'``. The special characters are: ``'.'`` (Dot.) In the default mode, this matches any character except a newline. If the :const:`DOTALL` flag has been specified, this matches any character including a newline. ``'^'`` (Caret.) Matches the start of the string, and in :const:`MULTILINE` mode also matches immediately after each newline. ``'$'`` Matches the end of the string or just before the newline at the end of the string, and in :const:`MULTILINE` mode also matches before a newline. ``foo`` matches both 'foo' and 'foobar', while the regular expression ``foo$`` matches only 'foo'. More interestingly, searching for ``foo.$`` in ``'foo1\nfoo2\n'`` matches 'foo2' normally, but 'foo1' in :const:`MULTILINE` mode; searching for a single ``$`` in ``'foo\n'`` will find two (empty) matches: one just before the newline, and one at the end of the string. ``'*'`` Causes the resulting RE to match 0 or more repetitions of the preceding RE, as many repetitions as are possible. ``ab*`` will match 'a', 'ab', or 'a' followed by any number of 'b's. ``'+'`` Causes the resulting RE to match 1 or more repetitions of the preceding RE. ``ab+`` will match 'a' followed by any non-zero number of 'b's; it will not match just 'a'. ``'?'`` Causes the resulting RE to match 0 or 1 repetitions of the preceding RE. ``ab?`` will match either 'a' or 'ab'. ``*?``, ``+?``, ``??`` The ``'*'``, ``'+'``, and ``'?'`` qualifiers are all :dfn:`greedy`; they match as much text as possible. Sometimes this behaviour isn't desired; if the RE ``<.*>`` is matched against ``'<H1>title</H1>'``, it will match the entire string, and not just ``'<H1>'``. Adding ``'?'`` after the qualifier makes it perform the match in :dfn:`non-greedy` or :dfn:`minimal` fashion; as *few* characters as possible will be matched. Using ``.*?`` in the previous expression will match only ``'<H1>'``. ``{m}`` Specifies that exactly *m* copies of the previous RE should be matched; fewer matches cause the entire RE not to match. For example, ``a{6}`` will match exactly six ``'a'`` characters, but not five. ``{m,n}`` Causes the resulting RE to match from *m* to *n* repetitions of the preceding RE, attempting to match as many repetitions as possible. For example, ``a{3,5}`` will match from 3 to 5 ``'a'`` characters. Omitting *m* specifies a lower bound of zero, and omitting *n* specifies an infinite upper bound. As an example, ``a{4,}b`` will match ``aaaab`` or a thousand ``'a'`` characters followed by a ``b``, but not ``aaab``. The comma may not be omitted or the modifier would be confused with the previously described form. ``{m,n}?`` Causes the resulting RE to match from *m* to *n* repetitions of the preceding RE, attempting to match as *few* repetitions as possible. This is the non-greedy version of the previous qualifier. For example, on the 6-character string ``'aaaaaa'``, ``a{3,5}`` will match 5 ``'a'`` characters, while ``a{3,5}?`` will only match 3 characters. ``'\'`` Either escapes special characters (permitting you to match characters like ``'*'``, ``'?'``, and so forth), or signals a special sequence; special sequences are discussed below. If you're not using a raw string to express the pattern, remember that Python also uses the backslash as an escape sequence in string literals; if the escape sequence isn't recognized by Python's parser, the backslash and subsequent character are included in the resulting string. However, if Python would recognize the resulting sequence, the backslash should be repeated twice. This is complicated and hard to understand, so it's highly recommended that you use raw strings for all but the simplest expressions. ``[]`` Used to indicate a set of characters. In a set: * Characters can be listed individually, e.g. ``[amk]`` will match ``'a'``, ``'m'``, or ``'k'``. * Ranges of characters can be indicated by giving two characters and separating them by a ``'-'``, for example ``[a-z]`` will match any lowercase ASCII letter, ``[0-5][0-9]`` will match all the two-digits numbers from ``00`` to ``59``, and ``[0-9A-Fa-f]`` will match any hexadecimal digit. If ``-`` is escaped (e.g. ``[a\-z]``) or if it's placed as the first or last character (e.g. ``[a-]``), it will match a literal ``'-'``. * Special characters lose their special meaning inside sets. For example, ``[(+*)]`` will match any of the literal characters ``'('``, ``'+'``, ``'*'``, or ``')'``. * Character classes such as ``\w`` or ``\S`` (defined below) are also accepted inside a set, although the characters they match depends on whether :const:`LOCALE` or :const:`UNICODE` mode is in force. * Characters that are not within a range can be matched by :dfn:`complementing` the set. If the first character of the set is ``'^'``, all the characters that are *not* in the set will be matched. For example, ``[^5]`` will match any character except ``'5'``, and ``[^^]`` will match any character except ``'^'``. ``^`` has no special meaning if it's not the first character in the set. * To match a literal ``']'`` inside a set, precede it with a backslash, or place it at the beginning of the set. For example, both ``[()[\]{}]`` and ``[]()[{}]`` will both match a parenthesis. ``'|'`` ``A|B``, where A and B can be arbitrary REs, creates a regular expression that will match either A or B. An arbitrary number of REs can be separated by the ``'|'`` in this way. This can be used inside groups (see below) as well. As the target string is scanned, REs separated by ``'|'`` are tried from left to right. When one pattern completely matches, that branch is accepted. This means that once ``A`` matches, ``B`` will not be tested further, even if it would produce a longer overall match. In other words, the ``'|'`` operator is never greedy. To match a literal ``'|'``, use ``\|``, or enclose it inside a character class, as in ``[|]``. ``(...)`` Matches whatever regular expression is inside the parentheses, and indicates the start and end of a group; the contents of a group can be retrieved after a match has been performed, and can be matched later in the string with the ``\number`` special sequence, described below. To match the literals ``'('`` or ``')'``, use ``\(`` or ``\)``, or enclose them inside a character class: ``[(] [)]``. ``(?...)`` This is an extension notation (a ``'?'`` following a ``'('`` is not meaningful otherwise). The first character after the ``'?'`` determines what the meaning and further syntax of the construct is. Extensions usually do not create a new group; ``(?P<name>...)`` is the only exception to this rule. Following are the currently supported extensions. ``(?iLmsux)`` (One or more letters from the set ``'i'``, ``'L'``, ``'m'``, ``'s'``, ``'u'``, ``'x'``.) The group matches the empty string; the letters set the corresponding flags: :const:`re.I` (ignore case), :const:`re.L` (locale dependent), :const:`re.M` (multi-line), :const:`re.S` (dot matches all), :const:`re.U` (Unicode dependent), and :const:`re.X` (verbose), for the entire regular expression. (The flags are described in :ref:`contents-of-module-re`.) This is useful if you wish to include the flags as part of the regular expression, instead of passing a *flag* argument to the :func:`re.compile` function. Note that the ``(?x)`` flag changes how the expression is parsed. It should be used first in the expression string, or after one or more whitespace characters. If there are non-whitespace characters before the flag, the results are undefined. ``(?:...)`` A non-capturing version of regular parentheses. Matches whatever regular expression is inside the parentheses, but the substring matched by the group *cannot* be retrieved after performing a match or referenced later in the pattern. ``(?P<name>...)`` Similar to regular parentheses, but the substring matched by the group is accessible within the rest of the regular expression via the symbolic group name *name*. Group names must be valid Python identifiers, and each group name must be defined only once within a regular expression. A symbolic group is also a numbered group, just as if the group were not named. So the group named ``id`` in the example below can also be referenced as the numbered group ``1``. For example, if the pattern is ``(?P<id>[a-zA-Z_]\w*)``, the group can be referenced by its name in arguments to methods of match objects, such as ``m.group('id')`` or ``m.end('id')``, and also by name in the regular expression itself (using ``(?P=id)``) and replacement text given to ``.sub()`` (using ``\g<id>``). ``(?P=name)`` Matches whatever text was matched by the earlier group named *name*. ``(?#...)`` A comment; the contents of the parentheses are simply ignored. ``(?=...)`` Matches if ``...`` matches next, but doesn't consume any of the string. This is called a lookahead assertion. For example, ``Isaac (?=Asimov)`` will match ``'Isaac '`` only if it's followed by ``'Asimov'``. ``(?!...)`` Matches if ``...`` doesn't match next. This is a negative lookahead assertion. For example, ``Isaac (?!Asimov)`` will match ``'Isaac '`` only if it's *not* followed by ``'Asimov'``. ``(?<=...)`` Matches if the current position in the string is preceded by a match for ``...`` that ends at the current position. This is called a :dfn:`positive lookbehind assertion`. ``(?<=abc)def`` will find a match in ``abcdef``, since the lookbehind will back up 3 characters and check if the contained pattern matches. The contained pattern must only match strings of some fixed length, meaning that ``abc`` or ``a|b`` are allowed, but ``a*`` and ``a{3,4}`` are not. Note that patterns which start with positive lookbehind assertions will not match at the beginning of the string being searched; you will most likely want to use the :func:`search` function rather than the :func:`match` function: >>> import re >>> m = re.search('(?<=abc)def', 'abcdef') >>> m.group(0) 'def' This example looks for a word following a hyphen: >>> m = re.search('(?<=-)\w+', 'spam-egg') >>> m.group(0) 'egg' ``(?<!...)`` Matches if the current position in the string is not preceded by a match for ``...``. This is called a :dfn:`negative lookbehind assertion`. Similar to positive lookbehind assertions, the contained pattern must only match strings of some fixed length. Patterns which start with negative lookbehind assertions may match at the beginning of the string being searched. ``(?(id/name)yes-pattern|no-pattern)`` Will try to match with ``yes-pattern`` if the group with given *id* or *name* exists, and with ``no-pattern`` if it doesn't. ``no-pattern`` is optional and can be omitted. For example, ``(<)?(\w+@\w+(?:\.\w+)+)(?(1)>)`` is a poor email matching pattern, which will match with ``'<user@host.com>'`` as well as ``'user@host.com'``, but not with ``'<user@host.com'``. .. versionadded:: 2.4 The special sequences consist of ``'\'`` and a character from the list below. If the ordinary character is not on the list, then the resulting RE will match the second character. For example, ``\$`` matches the character ``'$'``. ``\number`` Matches the contents of the group of the same number. Groups are numbered starting from 1. For example, ``(.+) \1`` matches ``'the the'`` or ``'55 55'``, but not ``'the end'`` (note the space after the group). This special sequence can only be used to match one of the first 99 groups. If the first digit of *number* is 0, or *number* is 3 octal digits long, it will not be interpreted as a group match, but as the character with octal value *number*. Inside the ``'['`` and ``']'`` of a character class, all numeric escapes are treated as characters. ``\A`` Matches only at the start of the string. ``\b`` Matches the empty string, but only at the beginning or end of a word. A word is defined as a sequence of alphanumeric or underscore characters, so the end of a word is indicated by whitespace or a non-alphanumeric, non-underscore character. Note that formally, ``\b`` is defined as the boundary between a ``\w`` and a ``\W`` character (or vice versa), or between ``\w`` and the beginning/end of the string, so the precise set of characters deemed to be alphanumeric depends on the values of the ``UNICODE`` and ``LOCALE`` flags. For example, ``r'\bfoo\b'`` matches ``'foo'``, ``'foo.'``, ``'(foo)'``, ``'bar foo baz'`` but not ``'foobar'`` or ``'foo3'``. Inside a character range, ``\b`` represents the backspace character, for compatibility with Python's string literals. ``\B`` Matches the empty string, but only when it is *not* at the beginning or end of a word. This means that ``r'py\B'`` matches ``'python'``, ``'py3'``, ``'py2'``, but not ``'py'``, ``'py.'``, or ``'py!'``. ``\B`` is just the opposite of ``\b``, so is also subject to the settings of ``LOCALE`` and ``UNICODE``. ``\d`` When the :const:`UNICODE` flag is not specified, matches any decimal digit; this is equivalent to the set ``[0-9]``. With :const:`UNICODE`, it will match whatever is classified as a decimal digit in the Unicode character properties database. ``\D`` When the :const:`UNICODE` flag is not specified, matches any non-digit character; this is equivalent to the set ``[^0-9]``. With :const:`UNICODE`, it will match anything other than character marked as digits in the Unicode character properties database. ``\s`` When the :const:`UNICODE` flag is not specified, it matches any whitespace character, this is equivalent to the set ``[ \t\n\r\f\v]``. The :const:`LOCALE` flag has no extra effect on matching of the space. If :const:`UNICODE` is set, this will match the characters ``[ \t\n\r\f\v]`` plus whatever is classified as space in the Unicode character properties database. ``\S`` When the :const:`UNICODE` flags is not specified, matches any non-whitespace character; this is equivalent to the set ``[^ \t\n\r\f\v]`` The :const:`LOCALE` flag has no extra effect on non-whitespace match. If :const:`UNICODE` is set, then any character not marked as space in the Unicode character properties database is matched. ``\w`` When the :const:`LOCALE` and :const:`UNICODE` flags are not specified, matches any alphanumeric character and the underscore; this is equivalent to the set ``[a-zA-Z0-9_]``. With :const:`LOCALE`, it will match the set ``[0-9_]`` plus whatever characters are defined as alphanumeric for the current locale. If :const:`UNICODE` is set, this will match the characters ``[0-9_]`` plus whatever is classified as alphanumeric in the Unicode character properties database. ``\W`` When the :const:`LOCALE` and :const:`UNICODE` flags are not specified, matches any non-alphanumeric character; this is equivalent to the set ``[^a-zA-Z0-9_]``. With :const:`LOCALE`, it will match any character not in the set ``[0-9_]``, and not defined as alphanumeric for the current locale. If :const:`UNICODE` is set, this will match anything other than ``[0-9_]`` plus characters classied as not alphanumeric in the Unicode character properties database. ``\Z`` Matches only at the end of the string. If both :const:`LOCALE` and :const:`UNICODE` flags are included for a particular sequence, then :const:`LOCALE` flag takes effect first followed by the :const:`UNICODE`. Most of the standard escapes supported by Python string literals are also accepted by the regular expression parser:: \a \b \f \n \r \t \v \x \\ (Note that ``\b`` is used to represent word boundaries, and means "backspace" only inside character classes.) Octal escapes are included in a limited form: If the first digit is a 0, or if there are three octal digits, it is considered an octal escape. Otherwise, it is a group reference. As for string literals, octal escapes are always at most three digits in length. .. _contents-of-module-re: Module Contents --------------- The module defines several functions, constants, and an exception. Some of the functions are simplified versions of the full featured methods for compiled regular expressions. Most non-trivial applications always use the compiled form. .. function:: compile(pattern, flags=0) Compile a regular expression pattern into a regular expression object, which can be used for matching using its :func:`match` and :func:`search` methods, described below. The expression's behaviour can be modified by specifying a *flags* value. Values can be any of the following variables, combined using bitwise OR (the ``|`` operator). The sequence :: prog = re.compile(pattern) result = prog.match(string) is equivalent to :: result = re.match(pattern, string) but using :func:`re.compile` and saving the resulting regular expression object for reuse is more efficient when the expression will be used several times in a single program. .. note:: The compiled versions of the most recent patterns passed to :func:`re.match`, :func:`re.search` or :func:`re.compile` are cached, so programs that use only a few regular expressions at a time needn't worry about compiling regular expressions. .. data:: DEBUG Display debug information about compiled expression. .. data:: I IGNORECASE Perform case-insensitive matching; expressions like ``[A-Z]`` will match lowercase letters, too. This is not affected by the current locale. .. data:: L LOCALE Make ``\w``, ``\W``, ``\b``, ``\B``, ``\s`` and ``\S`` dependent on the current locale. .. data:: M MULTILINE When specified, the pattern character ``'^'`` matches at the beginning of the string and at the beginning of each line (immediately following each newline); and the pattern character ``'$'`` matches at the end of the string and at the end of each line (immediately preceding each newline). By default, ``'^'`` matches only at the beginning of the string, and ``'$'`` only at the end of the string and immediately before the newline (if any) at the end of the string. .. data:: S DOTALL Make the ``'.'`` special character match any character at all, including a newline; without this flag, ``'.'`` will match anything *except* a newline. .. data:: U UNICODE Make ``\w``, ``\W``, ``\b``, ``\B``, ``\d``, ``\D``, ``\s`` and ``\S`` dependent on the Unicode character properties database. .. versionadded:: 2.0 .. data:: X VERBOSE This flag allows you to write regular expressions that look nicer. Whitespace within the pattern is ignored, except when in a character class or preceded by an unescaped backslash, and, when a line contains a ``'#'`` neither in a character class or preceded by an unescaped backslash, all characters from the leftmost such ``'#'`` through the end of the line are ignored. That means that the two following regular expression objects that match a decimal number are functionally equal:: a = re.compile(r"""\d + # the integral part \. # the decimal point \d * # some fractional digits""", re.X) b = re.compile(r"\d+\.\d*") .. function:: search(pattern, string, flags=0) Scan through *string* looking for a location where the regular expression *pattern* produces a match, and return a corresponding :class:`MatchObject` instance. Return ``None`` if no position in the string matches the pattern; note that this is different from finding a zero-length match at some point in the string. .. function:: match(pattern, string, flags=0) If zero or more characters at the beginning of *string* match the regular expression *pattern*, return a corresponding :class:`MatchObject` instance. Return ``None`` if the string does not match the pattern; note that this is different from a zero-length match. Note that even in :const:`MULTILINE` mode, :func:`re.match` will only match at the beginning of the string and not at the beginning of each line. If you want to locate a match anywhere in *string*, use :func:`search` instead (see also :ref:`search-vs-match`). .. function:: split(pattern, string, maxsplit=0, flags=0) Split *string* by the occurrences of *pattern*. If capturing parentheses are used in *pattern*, then the text of all groups in the pattern are also returned as part of the resulting list. If *maxsplit* is nonzero, at most *maxsplit* splits occur, and the remainder of the string is returned as the final element of the list. (Incompatibility note: in the original Python 1.5 release, *maxsplit* was ignored. This has been fixed in later releases.) >>> re.split('\W+', 'Words, words, words.') ['Words', 'words', 'words', ''] >>> re.split('(\W+)', 'Words, words, words.') ['Words', ', ', 'words', ', ', 'words', '.', ''] >>> re.split('\W+', 'Words, words, words.', 1) ['Words', 'words, words.'] >>> re.split('[a-f]+', '0a3B9', flags=re.IGNORECASE) ['0', '3', '9'] If there are capturing groups in the separator and it matches at the start of the string, the result will start with an empty string. The same holds for the end of the string: >>> re.split('(\W+)', '...words, words...') ['', '...', 'words', ', ', 'words', '...', ''] That way, separator components are always found at the same relative indices within the result list (e.g., if there's one capturing group in the separator, the 0th, the 2nd and so forth). Note that *split* will never split a string on an empty pattern match. For example: >>> re.split('x*', 'foo') ['foo'] >>> re.split("(?m)^$", "foo\n\nbar\n") ['foo\n\nbar\n'] .. versionchanged:: 2.7 Added the optional flags argument. .. function:: findall(pattern, string, flags=0) Return all non-overlapping matches of *pattern* in *string*, as a list of strings. The *string* is scanned left-to-right, and matches are returned in the order found. If one or more groups are present in the pattern, return a list of groups; this will be a list of tuples if the pattern has more than one group. Empty matches are included in the result unless they touch the beginning of another match. .. versionadded:: 1.5.2 .. versionchanged:: 2.4 Added the optional flags argument. .. function:: finditer(pattern, string, flags=0) Return an :term:`iterator` yielding :class:`MatchObject` instances over all non-overlapping matches for the RE *pattern* in *string*. The *string* is scanned left-to-right, and matches are returned in the order found. Empty matches are included in the result unless they touch the beginning of another match. .. versionadded:: 2.2 .. versionchanged:: 2.4 Added the optional flags argument. .. function:: sub(pattern, repl, string, count=0, flags=0) Return the string obtained by replacing the leftmost non-overlapping occurrences of *pattern* in *string* by the replacement *repl*. If the pattern isn't found, *string* is returned unchanged. *repl* can be a string or a function; if it is a string, any backslash escapes in it are processed. That is, ``\n`` is converted to a single newline character, ``\r`` is converted to a carriage return, and so forth. Unknown escapes such as ``\j`` are left alone. Backreferences, such as ``\6``, are replaced with the substring matched by group 6 in the pattern. For example: >>> re.sub(r'def\s+([a-zA-Z_][a-zA-Z_0-9]*)\s*\(\s*\):', ... r'static PyObject*\npy_\1(void)\n{', ... 'def myfunc():') 'static PyObject*\npy_myfunc(void)\n{' If *repl* is a function, it is called for every non-overlapping occurrence of *pattern*. The function takes a single match object argument, and returns the replacement string. For example: >>> def dashrepl(matchobj): ... if matchobj.group(0) == '-': return ' ' ... else: return '-' >>> re.sub('-{1,2}', dashrepl, 'pro----gram-files') 'pro--gram files' >>> re.sub(r'\sAND\s', ' & ', 'Baked Beans And Spam', flags=re.IGNORECASE) 'Baked Beans & Spam' The pattern may be a string or an RE object. The optional argument *count* is the maximum number of pattern occurrences to be replaced; *count* must be a non-negative integer. If omitted or zero, all occurrences will be replaced. Empty matches for the pattern are replaced only when not adjacent to a previous match, so ``sub('x*', '-', 'abc')`` returns ``'-a-b-c-'``. In addition to character escapes and backreferences as described above, ``\g<name>`` will use the substring matched by the group named ``name``, as defined by the ``(?P<name>...)`` syntax. ``\g<number>`` uses the corresponding group number; ``\g<2>`` is therefore equivalent to ``\2``, but isn't ambiguous in a replacement such as ``\g<2>0``. ``\20`` would be interpreted as a reference to group 20, not a reference to group 2 followed by the literal character ``'0'``. The backreference ``\g<0>`` substitutes in the entire substring matched by the RE. .. versionchanged:: 2.7 Added the optional flags argument. .. function:: subn(pattern, repl, string, count=0, flags=0) Perform the same operation as :func:`sub`, but return a tuple ``(new_string, number_of_subs_made)``. .. versionchanged:: 2.7 Added the optional flags argument. .. function:: escape(string) Return *string* with all non-alphanumerics backslashed; this is useful if you want to match an arbitrary literal string that may have regular expression metacharacters in it. .. function:: purge() Clear the regular expression cache. .. exception:: error Exception raised when a string passed to one of the functions here is not a valid regular expression (for example, it might contain unmatched parentheses) or when some other error occurs during compilation or matching. It is never an error if a string contains no match for a pattern. .. _re-objects: Regular Expression Objects -------------------------- .. class:: RegexObject The :class:`RegexObject` class supports the following methods and attributes: .. method:: RegexObject.search(string[, pos[, endpos]]) Scan through *string* looking for a location where this regular expression produces a match, and return a corresponding :class:`MatchObject` instance. Return ``None`` if no position in the string matches the pattern; note that this is different from finding a zero-length match at some point in the string. The optional second parameter *pos* gives an index in the string where the search is to start; it defaults to ``0``. This is not completely equivalent to slicing the string; the ``'^'`` pattern character matches at the real beginning of the string and at positions just after a newline, but not necessarily at the index where the search is to start. The optional parameter *endpos* limits how far the string will be searched; it will be as if the string is *endpos* characters long, so only the characters from *pos* to ``endpos - 1`` will be searched for a match. If *endpos* is less than *pos*, no match will be found, otherwise, if *rx* is a compiled regular expression object, ``rx.search(string, 0, 50)`` is equivalent to ``rx.search(string[:50], 0)``. >>> pattern = re.compile("d") >>> pattern.search("dog") # Match at index 0 <_sre.SRE_Match object at ...> >>> pattern.search("dog", 1) # No match; search doesn't include the "d" .. method:: RegexObject.match(string[, pos[, endpos]]) If zero or more characters at the *beginning* of *string* match this regular expression, return a corresponding :class:`MatchObject` instance. Return ``None`` if the string does not match the pattern; note that this is different from a zero-length match. The optional *pos* and *endpos* parameters have the same meaning as for the :meth:`~RegexObject.search` method. >>> pattern = re.compile("o") >>> pattern.match("dog") # No match as "o" is not at the start of "dog". >>> pattern.match("dog", 1) # Match as "o" is the 2nd character of "dog". <_sre.SRE_Match object at ...> If you want to locate a match anywhere in *string*, use :meth:`~RegexObject.search` instead (see also :ref:`search-vs-match`). .. method:: RegexObject.split(string, maxsplit=0) Identical to the :func:`split` function, using the compiled pattern. .. method:: RegexObject.findall(string[, pos[, endpos]]) Similar to the :func:`findall` function, using the compiled pattern, but also accepts optional *pos* and *endpos* parameters that limit the search region like for :meth:`match`. .. method:: RegexObject.finditer(string[, pos[, endpos]]) Similar to the :func:`finditer` function, using the compiled pattern, but also accepts optional *pos* and *endpos* parameters that limit the search region like for :meth:`match`. .. method:: RegexObject.sub(repl, string, count=0) Identical to the :func:`sub` function, using the compiled pattern. .. method:: RegexObject.subn(repl, string, count=0) Identical to the :func:`subn` function, using the compiled pattern. .. attribute:: RegexObject.flags The regex matching flags. This is a combination of the flags given to :func:`.compile` and any ``(?...)`` inline flags in the pattern. .. attribute:: RegexObject.groups The number of capturing groups in the pattern. .. attribute:: RegexObject.groupindex A dictionary mapping any symbolic group names defined by ``(?P<id>)`` to group numbers. The dictionary is empty if no symbolic groups were used in the pattern. .. attribute:: RegexObject.pattern The pattern string from which the RE object was compiled. .. _match-objects: Match Objects ------------- .. class:: MatchObject Match objects always have a boolean value of ``True``. Since :meth:`~regex.match` and :meth:`~regex.search` return ``None`` when there is no match, you can test whether there was a match with a simple ``if`` statement:: match = re.search(pattern, string) if match: process(match) Match objects support the following methods and attributes: .. method:: MatchObject.expand(template) Return the string obtained by doing backslash substitution on the template string *template*, as done by the :meth:`~RegexObject.sub` method. Escapes such as ``\n`` are converted to the appropriate characters, and numeric backreferences (``\1``, ``\2``) and named backreferences (``\g<1>``, ``\g<name>``) are replaced by the contents of the corresponding group. .. method:: MatchObject.group([group1, ...]) Returns one or more subgroups of the match. If there is a single argument, the result is a single string; if there are multiple arguments, the result is a tuple with one item per argument. Without arguments, *group1* defaults to zero (the whole match is returned). If a *groupN* argument is zero, the corresponding return value is the entire matching string; if it is in the inclusive range [1..99], it is the string matching the corresponding parenthesized group. If a group number is negative or larger than the number of groups defined in the pattern, an :exc:`IndexError` exception is raised. If a group is contained in a part of the pattern that did not match, the corresponding result is ``None``. If a group is contained in a part of the pattern that matched multiple times, the last match is returned. >>> m = re.match(r"(\w+) (\w+)", "Isaac Newton, physicist") >>> m.group(0) # The entire match 'Isaac Newton' >>> m.group(1) # The first parenthesized subgroup. 'Isaac' >>> m.group(2) # The second parenthesized subgroup. 'Newton' >>> m.group(1, 2) # Multiple arguments give us a tuple. ('Isaac', 'Newton') If the regular expression uses the ``(?P<name>...)`` syntax, the *groupN* arguments may also be strings identifying groups by their group name. If a string argument is not used as a group name in the pattern, an :exc:`IndexError` exception is raised. A moderately complicated example: >>> m = re.match(r"(?P<first_name>\w+) (?P<last_name>\w+)", "Malcolm Reynolds") >>> m.group('first_name') 'Malcolm' >>> m.group('last_name') 'Reynolds' Named groups can also be referred to by their index: >>> m.group(1) 'Malcolm' >>> m.group(2) 'Reynolds' If a group matches multiple times, only the last match is accessible: >>> m = re.match(r"(..)+", "a1b2c3") # Matches 3 times. >>> m.group(1) # Returns only the last match. 'c3' .. method:: MatchObject.groups([default]) Return a tuple containing all the subgroups of the match, from 1 up to however many groups are in the pattern. The *default* argument is used for groups that did not participate in the match; it defaults to ``None``. (Incompatibility note: in the original Python 1.5 release, if the tuple was one element long, a string would be returned instead. In later versions (from 1.5.1 on), a singleton tuple is returned in such cases.) For example: >>> m = re.match(r"(\d+)\.(\d+)", "24.1632") >>> m.groups() ('24', '1632') If we make the decimal place and everything after it optional, not all groups might participate in the match. These groups will default to ``None`` unless the *default* argument is given: >>> m = re.match(r"(\d+)\.?(\d+)?", "24") >>> m.groups() # Second group defaults to None. ('24', None) >>> m.groups('0') # Now, the second group defaults to '0'. ('24', '0') .. method:: MatchObject.groupdict([default]) Return a dictionary containing all the *named* subgroups of the match, keyed by the subgroup name. The *default* argument is used for groups that did not participate in the match; it defaults to ``None``. For example: >>> m = re.match(r"(?P<first_name>\w+) (?P<last_name>\w+)", "Malcolm Reynolds") >>> m.groupdict() {'first_name': 'Malcolm', 'last_name': 'Reynolds'} .. method:: MatchObject.start([group]) MatchObject.end([group]) Return the indices of the start and end of the substring matched by *group*; *group* defaults to zero (meaning the whole matched substring). Return ``-1`` if *group* exists but did not contribute to the match. For a match object *m*, and a group *g* that did contribute to the match, the substring matched by group *g* (equivalent to ``m.group(g)``) is :: m.string[m.start(g):m.end(g)] Note that ``m.start(group)`` will equal ``m.end(group)`` if *group* matched a null string. For example, after ``m = re.search('b(c?)', 'cba')``, ``m.start(0)`` is 1, ``m.end(0)`` is 2, ``m.start(1)`` and ``m.end(1)`` are both 2, and ``m.start(2)`` raises an :exc:`IndexError` exception. An example that will remove *remove_this* from email addresses: >>> email = "tony@tiremove_thisger.net" >>> m = re.search("remove_this", email) >>> email[:m.start()] + email[m.end():] 'tony@tiger.net' .. method:: MatchObject.span([group]) For :class:`MatchObject` *m*, return the 2-tuple ``(m.start(group), m.end(group))``. Note that if *group* did not contribute to the match, this is ``(-1, -1)``. *group* defaults to zero, the entire match. .. attribute:: MatchObject.pos The value of *pos* which was passed to the :meth:`~RegexObject.search` or :meth:`~RegexObject.match` method of the :class:`RegexObject`. This is the index into the string at which the RE engine started looking for a match. .. attribute:: MatchObject.endpos The value of *endpos* which was passed to the :meth:`~RegexObject.search` or :meth:`~RegexObject.match` method of the :class:`RegexObject`. This is the index into the string beyond which the RE engine will not go. .. attribute:: MatchObject.lastindex The integer index of the last matched capturing group, or ``None`` if no group was matched at all. For example, the expressions ``(a)b``, ``((a)(b))``, and ``((ab))`` will have ``lastindex == 1`` if applied to the string ``'ab'``, while the expression ``(a)(b)`` will have ``lastindex == 2``, if applied to the same string. .. attribute:: MatchObject.lastgroup The name of the last matched capturing group, or ``None`` if the group didn't have a name, or if no group was matched at all. .. attribute:: MatchObject.re The regular expression object whose :meth:`~RegexObject.match` or :meth:`~RegexObject.search` method produced this :class:`MatchObject` instance. .. attribute:: MatchObject.string The string passed to :meth:`~RegexObject.match` or :meth:`~RegexObject.search`. Examples -------- Checking For a Pair ^^^^^^^^^^^^^^^^^^^ In this example, we'll use the following helper function to display match objects a little more gracefully: .. testcode:: def displaymatch(match): if match is None: return None return '<Match: %r, groups=%r>' % (match.group(), match.groups()) Suppose you are writing a poker program where a player's hand is represented as a 5-character string with each character representing a card, "a" for ace, "k" for king, "q" for queen, "j" for jack, "t" for 10, and "2" through "9" representing the card with that value. To see if a given string is a valid hand, one could do the following: >>> valid = re.compile(r"^[a2-9tjqk]{5}$") >>> displaymatch(valid.match("akt5q")) # Valid. "<Match: 'akt5q', groups=()>" >>> displaymatch(valid.match("akt5e")) # Invalid. >>> displaymatch(valid.match("akt")) # Invalid. >>> displaymatch(valid.match("727ak")) # Valid. "<Match: '727ak', groups=()>" That last hand, ``"727ak"``, contained a pair, or two of the same valued cards. To match this with a regular expression, one could use backreferences as such: >>> pair = re.compile(r".*(.).*\1") >>> displaymatch(pair.match("717ak")) # Pair of 7s. "<Match: '717', groups=('7',)>" >>> displaymatch(pair.match("718ak")) # No pairs. >>> displaymatch(pair.match("354aa")) # Pair of aces. "<Match: '354aa', groups=('a',)>" To find out what card the pair consists of, one could use the :meth:`~MatchObject.group` method of :class:`MatchObject` in the following manner: .. doctest:: >>> pair.match("717ak").group(1) '7' # Error because re.match() returns None, which doesn't have a group() method: >>> pair.match("718ak").group(1) Traceback (most recent call last): File "<pyshell#23>", line 1, in <module> re.match(r".*(.).*\1", "718ak").group(1) AttributeError: 'NoneType' object has no attribute 'group' >>> pair.match("354aa").group(1) 'a' Simulating scanf() ^^^^^^^^^^^^^^^^^^ .. index:: single: scanf() Python does not currently have an equivalent to :c:func:`scanf`. Regular expressions are generally more powerful, though also more verbose, than :c:func:`scanf` format strings. The table below offers some more-or-less equivalent mappings between :c:func:`scanf` format tokens and regular expressions. +--------------------------------+---------------------------------------------+ | :c:func:`scanf` Token | Regular Expression | +================================+=============================================+ | ``%c`` | ``.`` | +--------------------------------+---------------------------------------------+ | ``%5c`` | ``.{5}`` | +--------------------------------+---------------------------------------------+ | ``%d`` | ``[-+]?\d+`` | +--------------------------------+---------------------------------------------+ | ``%e``, ``%E``, ``%f``, ``%g`` | ``[-+]?(\d+(\.\d*)?|\.\d+)([eE][-+]?\d+)?`` | +--------------------------------+---------------------------------------------+ | ``%i`` | ``[-+]?(0[xX][\dA-Fa-f]+|0[0-7]*|\d+)`` | +--------------------------------+---------------------------------------------+ | ``%o`` | ``[-+]?[0-7]+`` | +--------------------------------+---------------------------------------------+ | ``%s`` | ``\S+`` | +--------------------------------+---------------------------------------------+ | ``%u`` | ``\d+`` | +--------------------------------+---------------------------------------------+ | ``%x``, ``%X`` | ``[-+]?(0[xX])?[\dA-Fa-f]+`` | +--------------------------------+---------------------------------------------+ To extract the filename and numbers from a string like :: /usr/sbin/sendmail - 0 errors, 4 warnings you would use a :c:func:`scanf` format like :: %s - %d errors, %d warnings The equivalent regular expression would be :: (\S+) - (\d+) errors, (\d+) warnings .. _search-vs-match: search() vs. match() ^^^^^^^^^^^^^^^^^^^^ .. sectionauthor:: Fred L. Drake, Jr. <fdrake@acm.org> Python offers two different primitive operations based on regular expressions: :func:`re.match` checks for a match only at the beginning of the string, while :func:`re.search` checks for a match anywhere in the string (this is what Perl does by default). For example:: >>> re.match("c", "abcdef") # No match >>> re.search("c", "abcdef") # Match <_sre.SRE_Match object at ...> Regular expressions beginning with ``'^'`` can be used with :func:`search` to restrict the match at the beginning of the string:: >>> re.match("c", "abcdef") # No match >>> re.search("^c", "abcdef") # No match >>> re.search("^a", "abcdef") # Match <_sre.SRE_Match object at ...> Note however that in :const:`MULTILINE` mode :func:`match` only matches at the beginning of the string, whereas using :func:`search` with a regular expression beginning with ``'^'`` will match at the beginning of each line. >>> re.match('X', 'A\nB\nX', re.MULTILINE) # No match >>> re.search('^X', 'A\nB\nX', re.MULTILINE) # Match <_sre.SRE_Match object at ...> Making a Phonebook ^^^^^^^^^^^^^^^^^^ :func:`split` splits a string into a list delimited by the passed pattern. The method is invaluable for converting textual data into data structures that can be easily read and modified by Python as demonstrated in the following example that creates a phonebook. First, here is the input. Normally it may come from a file, here we are using triple-quoted string syntax: >>> text = """Ross McFluff: 834.345.1254 155 Elm Street ... ... Ronald Heathmore: 892.345.3428 436 Finley Avenue ... Frank Burger: 925.541.7625 662 South Dogwood Way ... ... ... Heather Albrecht: 548.326.4584 919 Park Place""" The entries are separated by one or more newlines. Now we convert the string into a list with each nonempty line having its own entry: .. doctest:: :options: +NORMALIZE_WHITESPACE >>> entries = re.split("\n+", text) >>> entries ['Ross McFluff: 834.345.1254 155 Elm Street', 'Ronald Heathmore: 892.345.3428 436 Finley Avenue', 'Frank Burger: 925.541.7625 662 South Dogwood Way', 'Heather Albrecht: 548.326.4584 919 Park Place'] Finally, split each entry into a list with first name, last name, telephone number, and address. We use the ``maxsplit`` parameter of :func:`split` because the address has spaces, our splitting pattern, in it: .. doctest:: :options: +NORMALIZE_WHITESPACE >>> [re.split(":? ", entry, 3) for entry in entries] [['Ross', 'McFluff', '834.345.1254', '155 Elm Street'], ['Ronald', 'Heathmore', '892.345.3428', '436 Finley Avenue'], ['Frank', 'Burger', '925.541.7625', '662 South Dogwood Way'], ['Heather', 'Albrecht', '548.326.4584', '919 Park Place']] The ``:?`` pattern matches the colon after the last name, so that it does not occur in the result list. With a ``maxsplit`` of ``4``, we could separate the house number from the street name: .. doctest:: :options: +NORMALIZE_WHITESPACE >>> [re.split(":? ", entry, 4) for entry in entries] [['Ross', 'McFluff', '834.345.1254', '155', 'Elm Street'], ['Ronald', 'Heathmore', '892.345.3428', '436', 'Finley Avenue'], ['Frank', 'Burger', '925.541.7625', '662', 'South Dogwood Way'], ['Heather', 'Albrecht', '548.326.4584', '919', 'Park Place']] Text Munging ^^^^^^^^^^^^ :func:`sub` replaces every occurrence of a pattern with a string or the result of a function. This example demonstrates using :func:`sub` with a function to "munge" text, or randomize the order of all the characters in each word of a sentence except for the first and last characters:: >>> def repl(m): ... inner_word = list(m.group(2)) ... random.shuffle(inner_word) ... return m.group(1) + "".join(inner_word) + m.group(3) >>> text = "Professor Abdolmalek, please report your absences promptly." >>> re.sub(r"(\w)(\w+)(\w)", repl, text) 'Poefsrosr Aealmlobdk, pslaee reorpt your abnseces plmrptoy.' >>> re.sub(r"(\w)(\w+)(\w)", repl, text) 'Pofsroser Aodlambelk, plasee reoprt yuor asnebces potlmrpy.' Finding all Adverbs ^^^^^^^^^^^^^^^^^^^ :func:`findall` matches *all* occurrences of a pattern, not just the first one as :func:`search` does. For example, if one was a writer and wanted to find all of the adverbs in some text, he or she might use :func:`findall` in the following manner: >>> text = "He was carefully disguised but captured quickly by police." >>> re.findall(r"\w+ly", text) ['carefully', 'quickly'] Finding all Adverbs and their Positions ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ If one wants more information about all matches of a pattern than the matched text, :func:`finditer` is useful as it provides instances of :class:`MatchObject` instead of strings. Continuing with the previous example, if one was a writer who wanted to find all of the adverbs *and their positions* in some text, he or she would use :func:`finditer` in the following manner: >>> text = "He was carefully disguised but captured quickly by police." >>> for m in re.finditer(r"\w+ly", text): ... print '%02d-%02d: %s' % (m.start(), m.end(), m.group(0)) 07-16: carefully 40-47: quickly Raw String Notation ^^^^^^^^^^^^^^^^^^^ Raw string notation (``r"text"``) keeps regular expressions sane. Without it, every backslash (``'\'``) in a regular expression would have to be prefixed with another one to escape it. For example, the two following lines of code are functionally identical: >>> re.match(r"\W(.)\1\W", " ff ") <_sre.SRE_Match object at ...> >>> re.match("\\W(.)\\1\\W", " ff ") <_sre.SRE_Match object at ...> When one wants to match a literal backslash, it must be escaped in the regular expression. With raw string notation, this means ``r"\\"``. Without raw string notation, one must use ``"\\\\"``, making the following lines of code functionally identical: >>> re.match(r"\\", r"\\") <_sre.SRE_Match object at ...> >>> re.match("\\\\", r"\\") <_sre.SRE_Match object at ...>